The Project Gutenberg eBook of A new system of chemical philosophy, Volume 2, Part 1

This ebook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this ebook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook.

Title: A new system of chemical philosophy, Volume 2, Part 1

Author: John Dalton

Release date: December 20, 2024 [eBook #74948]

Language: English

Original publication: Manchester: Executors of S. Russell for George Wilson, 1827

Credits: Aaron Adrignola and the Online Distributed Proofreading Team at https://www.pgdp.net (This file was produced from images generously made available by The Internet Archive)

*** START OF THE PROJECT GUTENBERG EBOOK A NEW SYSTEM OF CHEMICAL PHILOSOPHY, VOLUME 2, PART 1 ***

A NEW SYSTEM OF

CHEMICAL

PHILOSOPHY.

PART FIRST.—VOL. II.

REPRODUCED IN FACSIMILE

BY

WILLIAM DAWSON & SONS LTD.

102 WIGMORE STREET,

LONDON, W.1

AND PRINTED BY

HENDERSON & SPALDING

SYLVAN GROVE, OLD KENT ROAD,

LONDON, S.E.15

THIS EDITION IS LIMITED TO 1,000 COPIES

A NEW SYSTEM OF

CHEMICAL PHILOSOPHY.

PART FIRST OF

VOL. II.

BY

JOHN DALTON, F.R.S.

President of the Literary and Philosophical Society, Manchester.

Corresponding Member of the Royal Academy of Sciences, Paris,

Member of the Royal Academy, Munich, and of the Cæsarean

Natural History Society, Moscow;

Honorary Member of the Royal Medical Society, Edinburgh,

and of the Philosophical Societies of Bristol, Cambridge,

Leeds, Sheffield and Yorkshire.

Manchester:

Printed by the Executors of S. Russell.

FOR

GEORGE WILSON,

ESSEX STREET, STRAND

LONDON.

1827.

TO

JOHN SHARPE, ESQ. F. R. S.

OF STANMORE, MIDDLESEX,

(Late of Manchester,)

AS A TESTIMONY OF HIS FRIENDLY REGARD, AND OF HIS

LIBERAL ENCOURAGEMENT GIVEN TO THE PROMOTION

OF CHEMICAL SCIENCE:

AND TO

PETER EWART, ESQ.

Vice-President of the Literary and Philosophical Society

of Manchester,

ON THE SCORE OF FRIENDSHIP,

BUT MORE ESPECIALLY FOR THE ABLE EXPOSITION AND

EXCELLENT ILLUSTRATIONS OF THE FUNDAMENTAL

PRINCIPLES OF MECHANICS,

IN HIS ESSAY ON THE MEASURE OF MOVING FORCE,[1]

THIS WORK IS RESPECTFULLY INSCRIBED BY

THE AUTHOR.

1 Manchester Memoirs, Vol. II. (second series.)

PREFACE.

THE work now submitted to the public was begun to be printed in 1817; and the 13th and 14th sections, containing the oxides and sulphurets, were printed off before the end of October of the same year. The printing of the rest of the work to the appendix was finished in September, 1821. One sheet of the appendix was printed at the end of 1823; but no addition was afterwards made till May, 1826; when the printing was resumed, and has been continued to the present time.

It may be asked, what were the motives for such a plan of procedure. To this it may be replied, that soon after the publication of the first volume (in 1810), I began to prepare materials, and to institute experiments, relating to the oxides, &c., with occasional diversions into other departments of chemistry, as circumstances arose. As a great portion of my time was always necessarily engaged in professional duties, and as that part of the work I was about to commence was one running into detail, I thought it would be best to print it as I proceeded, whilst the train of thought and of experiments was fresh in view. The advantage in this case was expected to be partly at least counterbalanced by the loss of discoveries and improvements likely to be made in the interval between the printing and publishing of the several articles. This I was aware of; but as a principal object I had in view was to give the results of my own experience, in the various departments of chemical science, rather than to form the best compilation of Chemistry at the period, this object was most likely to be obtained by the proposed plan. It is true the time the work has been in the press has far exceeded my expectation; notwithstanding this I am not conscious of any very material alterations or additions, which I should wish to make at the present moment.

It affords me great pleasure to acknowledge the assistance I have had during the progress of this volume, from a valuable selection of chemical apparatus, for which I am indebted to the generosity of Mr. Sharpe; also the continued and friendly intercourse with Dr. Henry, whose discussions on scientific subjects are always instructive, and whose stores are always open when the promotion of science is the object.

My present design is to add a second part to this volume, and with that to finish the work. It will consist of the more complex compounds. Acids, and other products of the vegetable kingdom, Salts, &c., will form principal parts. Already I have a stock of experiments on these subjects; but I am not satisfied without exploring this region afresh.

August, 1827.

CONTENTS OF VOL. II.

Part First.

CHAP. V.—

COMPOUNDS OF TWO ELEMENTS.

Page.

SECTION 13.

Metallic Oxides

1

Oxide   of

Gold

5

———

Platina

11

———

Silver

17

Oxides of

Mercury

19

Oxide   of

Palladium

24

Oxides of

Rhodium, Iridium, and Osmium

26

———

Copper

26

———

Iron

28

———

Nickel

34

———

Tin

36

———

Lead

39

Oxide   of

Zinc

51

Oxides of

Potassium

53

———

Sodium

56

Oxide   of

Bismuth

57

Oxides of

Antimony

58

Oxide   of

Tellurium

62

Oxides of

Arsenic

63

———

Cobalt

68

———

Manganese

71

———

Chromium

80

———

Uranium

86

———

Molybdenum

87

———

Tungsten

90

———

Titanium

91

———

Columbium

92

———

Cerium

94

SECTION 14.

Earthy, Alkaline, and Metallic Sulphurets

96

Sulphurets of

Lime

99

Sulphuret of

Magnesia

111

Sulphurets of

Barytes

112

———

Strontites

114

———

Alumine, Silex, Yttria, Glucine and Zircone

114

———

Potash

116

———

Soda

119

Sulphuret   of

Ammonia

120

Sulphurets of

Gold

121

Sulphuret   of

Platina

123

Sulphurets of

Silver

126

———

Mercury

127

Sulphuret   of

Palladium

131

———

Rhodium

132

———

Iridium

132

———

Osmium

132

Sulphurets of

Copper

133

———

Iron

134

———

Nickel

138

———

Tin

139

———

Lead

144

———

Zinc

146

———

Potassium and Sodium

148

———

Bismuth

149

———

Antimony

151

Sulphuret   of

Tellurium

153

Sulphurets of

Arsenic

153

Sulphuret   of

Cobalt

160

Sulphurets of

Manganese

162

Sulphuret   of

Chromium

163

———

Uranium

164

———

Molybdenum

164

Sulphuret   of

Tungsten

164

Sulphurets of

Titanium, Columbium, and Cerium

165

SECTION 15.

Earthy, Alkaline, and Metallic Phosphurets

166

Phosphuret   of

Hydrogen

169

Phosphurets of

Carbon and Sulphur

184

Phosphuret   of

Lime

184

———

Barytes

188

———

Strontites

190

———

Gold

191

———

Platina

194

———

Silver

195

———

Mercury

197

———

Palladium

198

———

Copper

199

———

Iron

201

———

Nickel

201

———

Tin

202

———

Lead

203

Phosphurets of

Zinc and Potassium

204

———

Sodium and Bismuth

207

———

Antimony and Arsenic

208

Phosphuret   of

Cobalt

209

———

Manganese

210

SECTION 16.

Carburets

211

———

of Iron ... steel

212-214

SECTION 17.

Metallic Alloys

218

Alloys of

Gold, with other metals

222

———

Platina, with other metals

226

———

Silver, with other metals

228

———

Mercury, and other metals: amalgams

230

Triple, Quadruple, &c. amalgams

236

Alloys of Copper, with other metals

238

—— Iron, with other metals

253

Alloys of Nickel and Tin, with do.

254

—— Lead, with do.

258

Triple Alloys, Solders; fusible metal, &c.

263

APPENDIX.

Abstract of De la Roche and Berard’s essay

on the specific heat of gases

268

———

Dulong and Petit’s essays,

On the expansion of air, mercury, glass,

iron, copper, and platina, by heat

272

On the capacities of certain bodies, for heat

274

On the laws of refrigeration

277

On the specific heats of certain bodies

280

Remarks on the above essays

282

New Table of the forces of vapours

298

Table of the expansion of air, and the force

of aqueous and ætherial vapour, adapted

to atmospheric temperatures

299

Applications of the above table

300

Formulæ for determining the proportions of

combustible gases, in mixtures

305

Heat produced by the combustion of gases

309

Absorption of gases by water

309

Fluoric acid—deutoxide of hydrogen

311

Muriatic acid—oxymuriatic acid

313

Nitric acid—compounds of azote and oxygen

315

On ammonia

328

Decomposition of ammonia by nitrous oxide

330

—— ——

—— by nitrous gas and oxygen

332

Volume of gases from the decomposition of ammonia

335

Decomposition of ammonia by a red heat

335

Decomposition of ammonia by oxymuriatic acid

335

Sulphuret of Carbon

338

Potassium, Sodium, &c.

340

Alum

341

New table of the relative weights of atoms.

352

ADDENDA.

Steel; mixed gases; expansion of liquids by heat

354

NEW SYSTEM OF

CHEMICAL PHILOSOPHY.

CHAP. V.

SECTION 13.

METALLIC OXIDES.

ALL the metals are disposed to combine with oxygen, but the combination is effected more easily with some than with others; the compound is usually called an oxide, but in some instances it is also called an acid. The same metal combines with one, two, or perhaps more atoms of oxygen, forming compounds which may be distinguished according to Dr. Thomson, by the terms protoxide, deutoxide, tritoxide, &c.

Such however is the repulsion of oxygen to oxygen that we rarely find three atoms of it retained by a single atom of any kind; and there are not many instances of metals capable of holding two atoms of oxygen. Various modifications of the proportions of metals and oxygen arise from the combinations of the oxides themselves one with another and with oxygen, so as to lead some to imagine that an atom of metal in some instances combines with 3, 4, or more of oxygen. This is altogether improbable: It is much more simple to suppose that one atom of oxygen connects two or more atoms of protoxide, 1 of protoxide unites to 1 or more of deutoxide, &c. These intermediate oxides are in few if any instances found to combine with acids like the other two oxides.

There is no reason that I am acquainted with for disbelieving that oxygen combined with a metal is still repulsive of oxygen, and that by the same law as particles of an elastic fluid; that is, the repulsion is inversely as the distance of the centres of the atoms. Hence it may be demonstrated that it requires twice the strength of affinity to form a deutoxide as a protoxide, three times the strength to form a tritoxide as a protoxide, &c. On this account it is, in all probability, that deutoxides are not numerous, and tritoxides are rarely if ever found.

The quantity of oxygen that combines with any metal to form an oxide may be investigated by several methods.

1st. By combustion; a given weight of the metal may be burned and the oxide produced may be collected and weighed; when the increase by combustion will appear.

2. By solution in an acid and precipitation by an earth or alkali; in this case a given weight of the metal is dissolved and precipitated; the precipitate collected and sufficiently dried shews the increase by oxygen.

3. By transferring the oxygen from an oxide to another metal; in this case the metal in question is usually immersed in a saline solution of the other metal; this latter metal gives up its oxygen to the former and is itself reformed or revived as it is termed.

4. By determining the proportion of hydrogen gas evolved during the solution of a given weight of metal; then allowing half of that volume for its equivalent of oxygenous gas, the weight of it shews the oxygen united to the metal; it being now well understood that water furnishes the two elements of hydrogen and oxygen in such case.

5. The higher oxides are conveniently determined by the application of the solution of oxymuriate of lime to the lower oxides in solution.

6. The quantity of oxygen in several oxides may be found from the quantity of nitrous gas evolved during the solution of a given weight of metal in nitric acid.

The first four methods have been used by chemists for several years past; the two last I have added from my own experience, having found them very useful assistants in various instances. The last method by nitrous gas, has indeed been proposed before, and labour bestowed on it both by others and myself, but without reducing the results to any certainty, till lately; the principal cause of this want of success has arisen from misunderstanding the nature and constitution of nitric acid. Most chemists seem with me to have mistaken nitrous acid for nitric; the former is composed of 1 atom of azote and 2 of oxygen; or perhaps of 2 azote and 4 oxygen; the latter of 2 azote and 5 oxygen, or 2 nitrous gas and 3 oxygen; the weight of the former is 19, or its double 38, on my scale, and that of the latter 45. [My reasons for adopting the above conclusion respecting nitrous acid, which is at variance with that in VOL. 1, p. 331, will be given hereafter.] When therefore a metal is oxidized by nitric acid, 3 atoms of oxygen (= 21) go to the metal, and 2 atoms of nitrous gas (= 24) are disengaged. Hence ⅞ of the weight of nitrous gas evolved is the weight of oxygen combined. It sometimes happens however that the nitrous gas is partly or wholly retained by the residue of nitric acid; but in this case the oxymuriate of lime can be applied to convert the nitrous gas into nitric acid, and from the oxygen imbibed the quantity of nitrous gas may be inferred.

1. Oxide of Gold.

Some difficulties have been found in ascertaining both the number and proportions of the oxides of gold; hence the differences in the results of authors.

Gold does not burn by exposure to heat, but gold leaf and gold wire may be deflagrated by electricity and galvanism; a purple powder is the product, which is considered by some as the protoxide of gold; but others, after Macquer and Proust, conceive with greater probability that this powder is nothing but gold reduced to its ultimate division. Solutions of gold which are of a fine yellow, give a purple stain; and gold deoxidized by green sulphate of iron is precipitated blue, which precipitate gradually assumes a yellow colour as the particles become united. The very weak affinity of gold for oxygen is shewn by the difficulty with which it is oxidized and the ease with which the oxygen is expelled again by heat; these facts seem to preclude the idea of gold combining with oxygen in high temperatures.

Protoxide. Gold is scarcely affected by pure sulphuric, nitric or muriatic acid; but it is easily oxidized and dissolved by nitro-muriatic acid (that is, a mixture of nitric and muriatic acids) when assisted by a temperature of 150 or 200°. Caustic potash being put into the solution and heated, a brownish black precipitate is obtained; but a part of the oxide remains in solution combined with the muriate of potash, according to Vauquelin; and Proust has observed that the oxide cannot be washed and dried in a moderate heat without a portion of the gold being revived; hence the difficulty of ascertaining in this way the weight of oxygen combining with gold.

I have succeeded, as I apprehend, in determining the relative weights of gold and oxygen, by two methods, which mutually corroborate each other. The first is by means of the nitrous gas generated by the solution of gold; and the second is, by finding what quantity of green oxide of iron is converted into red by precipitating a given weight of gold in solution.

Ten grains of guinea gold of the sp. gr. 17.3, were repeatedly dissolved in a small excess of nitro-muriatic acid; the quantity and purity of the nitrous gas generated were duly observed and allowance made for the loss occasioned by a small portion of common air originally in the gas bottle. The volume of nitrous gas corrected as above was always found between 1100 and 1200 grain measures, the weight of which may be estimated at 1.6 grains, corresponding to 1.4 grains of oxygen. The small portion of alloy (¹/₁₂) known to be in standard gold is chiefly copper with a small part silver; now it will be seen in the sequel that copper takes ¼ of its weight of oxygen; hence if we allow .8 of a grain for copper and .2 for the oxygen combining with it, we shall have 9.2 gold united to 1.2 oxygen, or 100 gold with 13 oxygen, which is nearly the same as Berzelius has determined by precipitating the gold by mercury.—Again, 10 grains of gold were dissolved as above (= 9.2 pure) and precipitated by a solution of pure green sulphate of iron of the sp. gr. 1.181 and which I had previously proved to contain 9 grains of green oxide in 100 measures. They converted 120 measures of this green sulphate into yellow, which was carefully precipitated afterwards by lime water, dried and weighed. The gold precipitated was found very nearly 9 grains; and the yellow oxide of iron mixed with oxide of copper was nearly 13 grains. Now 120 measures sulphate iron contain 10.8 grains green oxide, and these require ¹/₉ of their weight of oxygen (see the oxides of iron) to be changed into yellow oxide, or 1.2 oxygen. Hence it appears that the oxygen combined with the gold was transferred to the iron unchanged in quantity. It is to be observed however that green oxide of iron not only deoxidates the gold but it semideoxidates the copper also; so that .1 of the transferred oxygen above might be said to be derived from the copper, and the rest, or 1.1 from the 9 grains of gold; this would give 100 gold to 12.2 oxygen, which is still nearer to the determination of Berzelius. Upon the whole I am inclined to adopt the proportion of 8 to 1 or 100 to 12.5 as that which appears the most correct approximation and at the same time a ratio easily remembered and adapted to facilitate calculations.

We are now to consider whether the above is the protoxide. As no other oxide has been clearly shewn to exist, and as this combines with muriatic acid, with ammonia, with the oxide of tin, &c. and is wholly deoxidated by green sulphate of iron and by a moderate heat, there seems every reason to conclude it is a combination of the most simple kind, or 1 atom of metal to 1 of oxygen. Hence the atom of oxygen being 7, that of gold must be 56, and not 140 or 200, as stated VOL. 1, p. 250.

Berzelius seems to consider the above as the tritoxide, or three atoms of oxygen to one of gold; but it is extremely improbable that gold, which is allowed to have a weak affinity for oxygen, should be able to restrain the violent repulsion of three atoms of oxygen, and should on every occasion lose them all at once, and not by degrees, as is usual with other high oxides.

Subjoined are the results of various authors in regard to the oxide of gold, but generally given with diffidence as to their accuracy.

gold

oxygen

Bergman

100

+

10

Proust

—

+

8.57 to 31.

Oberkampf

—

+

10

Berzelius

—

+

12 (4 suboxide)

My results

—

+

12.5

Since writing the above I have had an opportunity of repeating the experiments on the oxide of gold by an improved nitrous gas apparatus, calculated almost entirely to exclude atmospheric air; I find less nitrous gas produced during the solution than stated above, sometimes by ⅓, and that it is variable according to the excess of nitric acid; also that the solution requires a portion of oxymuriatic acid as an equivalent for the nitrous gas retained. I prefer, however, the method of oxidizing the green sulphate of iron; by putting a small excess of the green sulphate and precipitating, first the red oxide and then the green, I obtained very distinct results. On the whole I am inclined to think my results preceding these have rather overrated the oxygen, and that it would as nearly be stated at 11 on the hundred. This would be nearly a mean of those in the above table, and would require the atom of gold to be 63, and that of the oxide 70. Between the two extremes of 56 and 63 it is most probable the true weight of the atom of gold will be found.

It may be proper to add that I have found 100 grain measures of muriatic acid (1.16), and 25 of nitric (1.35), are sufficient to dissolve 40 grains of standard gold; and I have reason to think the acids are in due proportion nearly, though different from what is usually recommended and employed.

2. Oxide of Platina.

Platina exhibits greater difficulties than gold in the investigation of its compounds with oxygen. It is not oxidized by heat; but by the explosion of an electric battery it is converted into a black powder, which is most probably the metal in extreme division, though it has been considered by some as the protoxide. Platina is capable of being oxidized and dissolved by nitro-muriatic acid, but less easily than gold; it requires more acid, as high or higher temperature and long continued digestion; nitrous gas is given out, during the solution, but sparingly. When lime or an alkali is added to the solution with a view to precipitate the oxide, a triple compound is usually formed of the acid, the oxide and the alkali, which is in most instances precipitated. This weighty compound renders the valuation of the oxygen in it very uncertain.

Chenevix has made some observations on the oxides of platina, (see Nichols. Journ. 7. p. 178.) He finds two oxides: the one consists of 93 platina and 7 oxygen; the other of 87 platina and 13 oxygen; but the experiments on which these results rest are not quite satisfactory.

Mr. E. Davy in the 40th vol. of the Philos. Magazine, states his having reduced the oxide of platina in solution by means of hydrogen; and that he finds the oxide to consist of 84 platina and 16 oxygen nearly. I could not succeed at all in effecting the reduction of the metal in this way.

Berzelius has lately given us the results of his investigation on this subject. (An. de Chimie 87—126.) According to this distinguished chemist there are two oxides of platina; the first consists of 100 metal and 8¼ oxygen, and the second of 100 metal and 16½ oxygen, nearly. In order to understand his process it may be proper to premise that when nitro-muriatic acid has dissolved as much platina as it can, there is still a great excess of one or both of the acids, which is unnecessary for the existence of the solution, and which may, and in general ought to be expelled by evaporation; by exposing the solution to a heat of 100 or 150° the excess of both acids is in great part driven off and a dry red mass is obtained, without smell, but very deliquescent. It is equal to or rather more than twice the weight of the platina. It consists of water, muriatic and nitric acids, oxygen and platina; it is still an acid salt. By exposing the dry mass again to a heat of 400 or 500°, it liquifies, exhales acid fumes having the odour of oxymuriatic acid, and becomes again a dry mass of an olive colour, exhaling fumes as the heat increases, and loses about ¼ of its weight. It is still soluble in water, except a few atoms of black powder, continues acid to the tests, and may be considered as a supermuriate of platina. If this olive powder be again heated almost to red, it exhales a visible smoke in the open air, which has the smell of oxymuriatic acid, and becomes a light brown powder, having lost a little weight. It is then neither deliquescent nor soluble in water except in a small degree so as to give the yellow colour. In this state it has been considered as a neutral muriate. By a moderately bright red heat this powder is decomposed and leaves a black spongy mass which is found to be pure platina.

The insoluble muriate of platina according to Mr. E. Davy, contains 72.5 per cent. of platina, and Berzelius finds 73.3; the loss is considered as oxymuriatic acid; hence from the known proportions of this acid Berzelius infers the constituents of 100 muriate = 73.3 platina, 6.075 oxygen and 20.625 muriatic acid; or 100 platina take 8.3 oxygen. The near agreement of the above authors is favourable to the accuracy of their results; but I have found some difficulty in obtaining the insoluble muriate free from the soluble one, and at the same time from reduced platina because the precise degree of heat requisite to produce it is neither well known nor easily attained; and it is desirable that a certain weight of platina should be dissolved and the same weight reproduced as a confirmation of accuracy. From a train of experiments on the soluble and insoluble muriates of platina, the salts being obtained from the purified laminated metal, I am disposed to consider the above results as good approximations to the truth.

In order to obtain the other oxide, Berzelius digests mercury in a solution of the supermuriate of platina; a black powder is thrown down, which is found to be platina, and mercury is taken up, being oxidized at the expence of the platina. It was found that 16.7 grains of mercury had precipitated 8.5 of platina; and the mercury being calculated as in the state of deutoxide, contained, from the known proportions of this metal, 1.4 oxygen; hence 8.5 platina must have yielded 1.4 oxygen; and if 8.5 ∶ 1.4 ∷ 100 ∶ 16.4; so that 100 platina must have had 16.4 oxygen in the supermuriate, or twice the quantity it had in the insoluble muriate.

This conclusion appears to me premature; the mercurial oxide should at least have been precipitated and a corresponding quantity have been found and proved to be the red oxide. Even had this been the case, it is not easy to determine what quantity of it might be due to the residue of nitro-muriatic acid. But I have not found that the common yellow or red oxide of mercury is precipitated by lime water in such case; the precipitate is brown, and evidently contains both mercury and platina. Proust had found in his excellent essay on platina (Journ. de Physique 52—437, 1801) that mercury decomposes muriate of platina, that an amalgam of platina with a little calomel, and much mercury in powder, were precipitated; exposed to heat, a fine black powder was left which had the characters of platina. Into a solution of pure platina that had been evaporated to dryness in 150° and redissolved, I put 9¼ grs. of mercury, and boiled it for 10 minutes in a glass capsule, till there was apparently no further change; the liquor filtered was as yellow as at first; the mixture of black powder and running mercury remaining on the filter, when dried, weighed 6½ grains; this heated to a low red in an iron spoon, left 1 grain of fine black powder; the liquid saturated with lime water, yielded 2½ grains dry black powder insoluble in cold nitric acid; after this, protomuriate of tin threw down 5¾ grains of the compound oxides of platina and tin. The solution at first contained 3.3 grains of platina.

In another experiment 2 parts of calomel were put to 1 of platina in solution; when heated to boiling, the calomel was dissolved and a little black powder was precipitated, which did not amount to half the weight of the platina. Lime water threw down from the liquid, a yellowish olive or brown precipitate, partially soluble in cold nitro-muriatic acid; and after this, muriate of tin yielded a brown precipitate. These experiments shew that the action between muriate of platina and mercury or the mercurial salts, is of a complicated nature, and is not limited to the decomposition of the oxide of platina and the substitution of the deutoxide of mercury in its place.

The difficulties abovementioned have led me to investigate the oxygen combining with platina by means of the nitrous gas yielded upon its solution in nitro-muriatic acid. By three distinct experiments I found that 10 grains of pure platina by solution yielded nearly 750 grain measures of nitrous gas, which may be considered as 1 grain in weight; ⅞ of which = .875 for oxygen; this would give 8.75 oxygen per cent. But from a subsequent experiment made under circumstances calculated to preclude as much as possible every source of fallacy, I obtained 790 measures of nitrous gas from 10 grains of platina; and the solution afterwards took 60 measures of oxymuriatic acid gas before a permanent smell of the gas was produced. These 790 measures = 1.05 grain, ⅞ of which = .92, to which add .04 for the oxygen acquired from the oxymuriatic acid, and we have .96 oxygen for 10 platina; or 100 platina take 9.6 oxygen. But if 9.6 ∶ 100 ∷ 7 ∶ 73, for the weight of an atom of platina, and 80 for that of the protoxide, as I apprehend it to be, and the only oxide of platina we can at present form. (The atom of platina in Vol. 1, page 248, was estimated at 100.)

3. Oxide of Silver.

When silver wire is exploded by electricity in oxygen gas, a black powder is produced, which is the oxide of silver. If silver be dissolved in nitric acid and precipitated by lime water, an olive brown powder falls which becomes black when exposed to the light. This black powder is the only oxide of silver with which we are acquainted. The proportion of silver and oxygen has been investigated by various chemists; the results are as under.

silver

oxygen

Wenzel

100

+

8.5

Proust

—

+

9.5

Bucholz and Rose

—

+

9.5[2]

Gay Lussac

—

+

7.6[3]

Berzelius

—

+

7.925

From the solution of 170 grains of standard silver I obtained nearly 30 oz. measures of nitrous gas = 18½ grains, corresponding to 16 oxygen. This would give 9.4 oxygen upon 100 silver. But as ⅒ of the metal or 17 grains was copper, and this takes ¼ of its weight of oxygen, we shall have 159 silver and 11¾ oxygen, or 100 silver and 7.7 oxygen nearly.

If we adopt 7.8 as the proper quantity of oxygen on 100 silver, we shall have 7.8 ∶ 100 ∷ 7 ∶ 90 nearly, which represents the weight of an atom of silver, and 97 that of the oxide.

4. Oxides of Mercury.

Two oxides of mercury have been long known and are well distinguished from each other. They may be obtained by exposing mercury to a heat not exceeding 600°, in contact with oxygen gas or atmospheric air, and due agitation; but this method is rarely adopted in practice. A high degree of heat decomposes the oxides again.

Protoxide. To obtain the protoxide, mercury must be slowly dissolved in dilute nitric acid without heat, and an excess of mercury must be used. If to 1000 grain measures of nitric acid, 1.2 sp. gr. be put 500 grains of mercury, by occasional agitation the requisite solution will be obtained in 24 hours. A portion of this solution must be treated with a small excess of lime water or caustic alkali, when a black powder will be thrown down, which is the oxide containing a minimum of oxygen, and hence may be considered the protoxide.

Deutoxide. If to 1000 measures of nitric acid, 1.2 sp. gr. be put 350 grains of mercury, and the mixture be boiled till the mercury disappear, a solution will be obtained containing the deutoxide. A portion of this being treated as beforementioned with lime water, a yellowish red powder is precipitated, which is the oxide of mercury containing a maximum of oxygen; all the later authors agree that it contains just double the quantity of oxygen to a given portion of mercury that the former does, and may therefore be called the deutoxide.

These two oxides combine with most acids and form salts, some of which exhibit remarkable differences occasioned by the oxides; thus, muriatic acid with the protoxide forms protomuriate of mercury, commonly called calomel, an insoluble salt; with the deutoxide it forms deutomuriate of mercury, commonly called corrosive sublimate, a soluble salt.

The proportions of metal and oxygen in the two oxides may be found by precipitating a known weight of mercury reduced by solution to either of the oxides, then drying and weighing the oxides, when the increase of weight by the addition of oxygen may be observed. This method is less accurate with regard to mercury than to other metals, on account of the very great weight of the atom, by which a small error in the gross weight of the oxide will be a great one as it respects the oxygen. This circumstance will partly account for the differences of authors on this subject.

One fact has been for some time known which demonstrates the oxygen in the red oxide to be double that in the black. Corrosive sublimate may be reduced to calomel by adding to it as much mercury as the sublimate contains, and triturating the mixture well, the oxygen of the red oxide (as well as the acid) becomes equally divided amongst the mercury and forms the black oxide, which is a constituent of calomel. Hence it follows that if the oxygen in one oxide can be ascertained, that of the other becomes known. Or if we can find how much oxygen must be added to the black oxide to change it to the red, we shall know the oxygen in both. Conformably with this last idea I have found a very accurate and elegant method of ascertaining the oxygen required to convert the black to the red oxide by treating protomuriate of mercury, mixed with water and a little muriatic acid, with oxymuriate of lime in solution; this must be gradually added till the protomuriate is dissolved, or rather converted to the deutomuriate. The quantity of oxygen in a given solution of oxymuriate of lime is most conveniently found by a solution of green sulphate of iron, as will be shewn under the oxides of that metal.

The oxides of mercury may be investigated by the nitrous gas produced during solution. When mercury is dissolved without heat, as mentioned above, no nitrous gas is liberated. The solution has a strong nitrous smell and requires a great quantity of oxymuriate of lime to saturate both the oxide and the acid. When heat is employed to accelerate the solution, nitrous gas is liberated. I dissolved 154 grains of mercury in nitric acid, 1.2 sp. gr., by the application of a gentle heat from a lamp. About ⅒ excess of acid remained in the solution; the nitrous gas obtained was 12 oz. measures = 7.5 grains, corresponding to 6.5 oxygen, which gives nearly 4 oxygen or 100 mercury. This would have led me to suppose I had obtained the black oxide in solution; it was however entirely the red, as it gave no precipitate by common salt, and exhibited the red oxide by lime water; but it required as much oxymuriate of lime as contained 6.5 oxygen to saturate the nitrous gas in the solution before any oxymuriatic acid was liberated. It was clear therefore that only ½ of the nitrous gas was evolved, and the other ½ was retained in the solution, though it had been exposed to boiling heat.

The following are the proportions assigned by the several authors for the oxides of mercury.

Mercury.

Oxygen

black.

red.

Bergman[4]

100

+

4

+

——

Lavoisier[5]

—

+

——

+

7.75 to 8

Chenevix[6]

—

+

12

+

18.5

Taboada[7]

—

+

5.2

+

11

Fourcroy & Thenard[8]

—

+

4.16

+

8.21

Sefstrom[9]

—

+

3.99

+

7.99

My results give

—

+

4.2

+

8.4

Though the relative weights of oxygen and mercury may be investigated as above, yet it is from the weight of mercury and the acids in the salts of mercury, some of which are of a very definite character, such as the muriate and the deutomuriate, that the relative weight of the atom of mercury is best investigated. From these I first deduced the weight of an atom of mercury to be 167 about 10 years ago, and subsequent experience has not induced me to change the number, though it probably may admit of some correction. If the atom of mercury be denoted by 167, that of the protoxide will be 174, and that of the deutoxide 181; which makes 100 mercury take 4.2 and 8.4 oxygen for the oxides respectively, as in the above table.

5. Oxide of Palladium.

The discoverer of this metal, Dr. Wollaston, has given us its distinguishing chemical properties; but we are indebted to Berzelius and Vauquelin for the proportions of oxygen and sulphur which combine with the metal (Vid. Annal. de Chimie, 77 and 78.) Few chemists have had an opportunity of making experiments on this metal, owing to its great scarcity and the consequent high price of it (1 shilling per grain). It does not seem desireable that any but those skilled in the more delicate chemical manipulations should operate upon articles such as the present.

Berzelius treated the muriate of palladium with mercury, which abstracted the oxygen and left an amalgam of palladium and mercury; from the quantity of mercury dissolved he calculates that 100 palladium combine with 14.2 oxygen. This conclusion was corroborated by the circumstance that 100 palladium were found to take 28 of sulphur, or double the quantity of oxygen, which frequently happens with the metals.

Vauquelin precipitates the oxide of palladium from the muriate by potash; it appears of a red brown colour, and is probably a hydrate; when washed and dried in a moderate heat, it becomes black, it loses 20 per cent. by a red heat and becomes metallic. This would give 25 oxygen on 100 metal; but as he finds the sulphuret to be 100 metal with 24 or 30 sulphur, nearly agreeing with Berzelius, it is very probable that a moderate heat does not free the oxide from water, and that consequently a part of the 20 per cent. loss is water.

I dissolved 3 grains of palladium in a small excess of nitro-muriatic acid and obtained 240 grain measures of nitrous gas; the same quantity was obtained a second time, and to the solution (slightly acid) were added by degrees 200 measures of oxymuriatic acid gas; after agitation no smell was perceived, but by increasing the quantity of gas a permanent smell of oxymuriatic acid was produced, and when 200 more had been added the smell was sensible for some days in an open jar, a presumption that no higher oxide is to be obtained. Now 240 nitrous gas = .32 of a grain, corresponding to .28 of oxygen, and 200 oxymuriatic acid = .64 of a grain, corresponding to .15 oxygen; the sum of the two portions of oxygen = .43, which must have combined with 3 grains of palladium; if .43 ∶ 4 ∷ 7 ∶ 50 nearly. Or 100 metal combine with 14 oxygen, as determined by Berzelius. I find the sulphuret to accord with this determination; and by carefully saturating the excess of acid in the nitro-muriate of palladium and then finding the quantity of lime water necessary to precipitate a certain weight of palladium, as well as the quantity of test muriatic acid necessary to dissolve the precipitated oxide, I am confirmed in the opinion that the atom of palladium must weigh 50 nearly, and its oxide 57, which there is every reason to believe is the protoxide.

6, 7, and 8. Oxides of Rhodium,

Iridium, and Osmium.

Nothing certain has yet been determined respecting the oxygenation of these very rare metals.

9. Oxides of Copper.

There are two oxides of copper according to the results of Proust, Chenevix, Berzelius and others, the proportions of which are given nearly the same by all, and so as to leave no reasonable doubt concerning their accuracy.

1. Protoxide. This oxide is orange, and contains 12½ oxygen on 100 copper: it is obtained by precipitating a portion of copper from the solution of any cupreous salt, by means of iron, then mixing this copper with a rather greater portion of the deutoxide and triturating them well. This being done, the mixture is to be dissolved in muriatic acid, and the orange oxide may then be precipitated by an alkali.

2. Deutoxide. This oxide is black; it contains 25 oxygen on 100 copper: the black oxide is obtained by dissolving copper in nitric or sulphuric acid, then precipitating by lime water or an alkali, and heating the dried precipitate red hot. It may also be obtained by exposing copper to a red heat for some time in common air or oxygen gas, removing the scales and exposing them in like manner, till at length the black oxide is formed.

By dissolving 112 grains of copper turnings in 1000 grain measures of 1.16 nitric acid, I obtained 48 oz. measures of nitrous gas, = 30 grains; by oxymuriate of lime I found 2 grains of nitrous gas in the solution, making in all 32 grains = 28 grains of oxygen. If 28 ∶ 112 ∷ 14 ∶ 56, for the weight of an atom of copper; hence the protoxide = 63 and the deutoxide = 70. These weights I adopted in 1806, and have not seen any reason to modify them since.

10. Oxides of Iron.

Two well known and well distinguished oxides of iron are now universally admitted; the one contains 28 oxygen on 100 iron, the other 42 on 100.

1. Protoxide. This is always formed when iron is dissolved in dilute sulphuric or muriatic acid; it may be precipitated from these solutions by the pure alkalies or earths; it appears at first of a dark green, being then a hydrate or combined with water; on a filtre it soon becomes yellow at the surface by attracting oxygen; when dried in a heat of 200° or upwards it becomes black. The quantity of oxygen in it is best ascertained from the hydrogen generated during the solution of the iron. All the authorities I have found nearly concur in their results as under.

100 grains of iron dissolved in dilute sulphuric or muriatic acids yield hydrogen, according to

Cavendish

(1766)

155

cubic inches.

Priestley,

from 147 to

162

Lavoisier

163

Vandermonde, Berthollet, and Monge

max.

176

Vauquelin

160 to

179

Dr. Thomson

163

My own Experiments give

160

Mean

164

= 82 oxygen

= 27.9 grains.

By precipitating the oxide, and drying it, nearly the same result may be obtained, as 100 iron will yield 128 oxide. This oxide is magnetic.

2. Intermediate or red oxide. This oxide may be obtained in various ways. First by calcining the sulphate or nitrate of iron. Second by precipitation from old solutions of the salts of iron; the precipitate is yellow at first, being perhaps a hydrate; but when dried and heated it becomes brown-red. Third, by calcining iron or repeatedly exposing iron filings to a red heat, and trituration. Fourth, by treating a solution of the sulphate or other salt of the protoxide with oxymuriatic acid, or oxymuriate of lime till oxymuriatic acid is evolved; then precipitating the oxide which is thus converted into the red. Fifth, by agitating water containing the green oxide recently precipitated, with oxygen gas. The red oxide is not sensibly magnetic.

The quantity of oxygen in the red oxide may be investigated in various ways, and it is generally allowed that they all concur in giving 42 on 100 iron. The one which I have used peculiarly, and prefer both for ease and accuracy, is to find the quantity of oxymuriatic acid gas necessary to saturate a given portion of the green sulphate. I take for instance 100 measures of 1.149 green sulphate, which I know to contain 8 grains of black oxide; this I find absorbs nearly 13 hundred measures of oxymuriatic acid gas before the acid smell is developed; the oxygen corresponding to this quantity of acid is known to be near 660 measures, = .88 grain. (See VOL. 1, p. 308.) Hence, if 8 ∶ .88 ∷ 128 ∶ 14; or 128 black oxide acquire 14 or become 142 when converted into the red oxide. This fact being established, I find it very convenient to make use of the oxymuriate of lime instead of the acid gas, adopting the solution of green sulphate of iron as a test of the quantity of oxymuriatic acid in a given volume of any solution of oxymuriate of lime.

The quantity of oxygen in the red oxide of iron may be inferred, but not so satisfactorily, from the nitrous gas obtained during the solution of iron in nitric acid. In order to obtain the most gas from a given quantity of the materials, they should be so proportioned as to produce saturation nearly. If an excess of acid be used, it absorbs the nitrous gas in part; and if an excess of iron, it is not all dissolved. I took 50 grains of iron filings and 600 measures of 1.15 nitric acid; these were put together in a gas bottle and by the assistance of a little heat a quantity of nitrous gas was obtained equal to 12 grains in weight, allowing the sp. gr. of the gas to be 1.04 (air being 1); all the iron was dissolved except a few atoms, and the solution was slightly acid; the whole of the oxide was red when precipitated by lime water. Now 50 grains of iron take 21 of oxygen to form the red oxide, and these correspond to 24 of nitrous gas, which is just twice the quantity obtained; one half of the gas generated then remains in combination with the iron, even when the constituents of the salt are proportioned so as to produce mutual saturation. I was in expectation that the quantity of nitrous gas retained might be converted into nitric acid by oxymuriate of lime, and hence might be determined; but in this I was disappointed. When oxymuriate of lime is added to the liquid, a pungent gas is liberated, the nature of which I have not determined. Thinking it might in part be owing to the iron, I transferred the acid to soda, by decomposing the nitrate of iron by the carbonate of soda; this nitrate of soda however, when treated with oxymuriate of lime, exhibited the same phenomenon as the nitrate of iron. When an acid is added the oxymuriatic acid itself is given out. These results will require further consideration. At present I am inclined to think the pungent gas is one atom of nitrous and one of oxygen or what I formerly considered as nitric acid. (See VOL. 1, plate 4, fig. 27.)

Some authors have found as they conceive, other oxides of iron, containing less or more of oxygen than the above; thus Darso finds by calcination from 15 to 56 oxygen on 100, (Nicholson’s Journ. VOL. 17); but there is great reason to believe that uncertainties must exist in his mode of experimenting sufficient to account for the anomalies observed. This author has suggested some doubt whether the oxygenous gas naturally contained in water has any effect on the salts with green oxide of iron. I have ascertained that point by repeated experiments, and can assert that the oxygen in water immediately unites to the green oxide of iron to convert it into red, and that the green sulphate may be used as an accurate test of the quantity of oxygen in water. When pure green sulphate of iron is dropped into water and then the oxide precipitated by a gradual addition of lime water, it falls down yellow in proportion to the oxygen in the water, which may be increased 3 or 4 times by artificial impregnation. If the oxygen of the water be previously saturated with nitrous gas, then the oxide is wholly precipitated green.

Gay Lussac, in the 80th VOL. of the Annal. de Chimie, asserts that an oxide of iron containing 37.8 oxygen upon 100 iron is always obtained when iron is burned in oxygenous gas, and still more effectually when iron is oxydized by water or steam. If this oxide exist in the proportions stated, it must be a compound of 1 atom of the protoxide and 2 of the red oxide, which would give 37.3 oxygen on 100 of iron.

From the above facts and observations it is evident the atom of iron must be considered as weighing 25, (and not 50 as already given, VOL. 1, page 258); the protoxide is 32, and the intermediate or red oxide is 2 atoms protoxide and 1 of oxygen = 71.

11. Oxides of Nickel.

1. Protoxide. It appears to be ascertained from the experiments of Proust (Journ. de Physiq. 63—442), Richter (Nichols. Jour. 12.), Tupputi (An. de Chimie 78.), and Rolhoff (An. of Philos. 3—335.), that the protoxide of nickel consists of 100 metal and from 25 to 28 oxygen. My experiments on the solution of nickel in nitric acid give me 14 grains nitrous gas, corresponding to 12 oxygen, in the solution of 44 grains of nickel; this gives 100 nickel to 27 oxygen, which I adopt as agreeing with the mean of the beforementioned results. This oxide may be obtained by precipitation from a solution of nitrate of nickel; it is at first white, being then a hydrate; when dried in a moderate temperature it becomes yellowish; after this, being heated to a cherry red, it loses from 20 to 24 per cent. of water and becomes of an ash grey colour: this is the only oxide of nickel soluble in acids, and must therefore be deemed the protoxide: hence we have 27 ∶ 100 ∷ 7 ∶ 26, nearly, for the weight of an atom of nickel; and not 25 or 50, as estimated at page 258. VOL. 1.

Intermediate oxide. Thenard discovered a second oxide of nickel by passing oxymuriatic acid through a solution of nickel and then precipitating; it is a black powder; when treated with sulphuric or nitric acid it gives out gas, being the excess of oxygen above the protoxide; but with muriatic acid it gives oxymuriatic acid gas. Rolhoff was induced to believe, but I do not know upon what evidence, that this oxide contained 1⅓ or 1½ times the oxygen of the protoxide. By means of oxymuriate of lime I find the protoxide recently precipitated, takes half as much oxygen as it had previously, to form the black oxide; and that it cannot be formed, like the red oxide of iron, by agitation with water mixed with common air. The white oxide treated with oxymuriate of lime becomes almost instantly blue, growing darker till it gradually passes into brown, and finally black in about half an hour. It contains 40 oxygen on 100 nickel, and is most probably constituted of 1 atom of oxygen holding 2 of protoxide together, more especially as it is not found in combination with acids. The method I prefer to procure the black oxide is to precipitate a known weight of oxide by lime water; then pouring off the clear liquid, I put as much liquid oxymuriate of lime to the moist hydrate as contains ⅒ of the weight of the oxide of oxygen, and stir frequently for half an hour; the point of saturation is found when more oxide put to the clear liquid is not discoloured on one hand, and when more oxymuriate of lime does not affect the colour, but remains in the clear liquid on the other hand.

12. Oxides of Tin.

There are two oxides of tin, which have been carefully investigated by several chemists, and appear to be ascertained with great precision. The protoxide is grey, and contains 13½ oxygen on 100 tin; the deutoxide is white, and contains 27 oxygen on 100 tin.

1. Protoxide. There are two methods of obtaining the constitution of this oxide. The first is by dissolving a certain weight of tin filings in muriatic acid, precipitating by lime water or carbonated alkalies and drying the oxide in a moderate heat; this is liable to some uncertainty; the precipitate being a hydrate, requires to be exposed to heat to expel the water; but if the heat approaches to red, the oxide takes fire and is converted into the deutoxide. The second method is to dissolve tin in muriatic acid and carefully collect the hydrogen gas evolved; this was first done by Mr. Cavendish, with his usual accuracy, and published in 1766; he found 1 oz. of tin yield 202 oz. measures of hydrogen gas. I have frequently tried this experiment and always found a proportional quantity, or very nearly 200 measures for each grain of tin. This mode of investigation appears to me unexceptionable. Now 200 hydrogen unite to 100 oxygen, and 100 grain measures of oxygen = .134 grain in weight; hence if .134 oxy. ∶ 1 tin ∷ 7 oxy. ∶ 52 nearly for the weight of an atom of tin, on the presumption this is the protoxide.

2. Deutoxide. This may be obtained by heating tin till it takes fire, and the produce of the combustion is the oxide required; but to ascertain the proportions of tin and oxygen two other methods are preferable; the one is to treat tin with nitric acid of the sp. gr. 1.2 to 1.4; a violent effervescence and great heat ensue and the tin is converted into a white powder. This being dried in 100° gives about 160 grains for 100 of tin. It consists of the deutoxide united to a little acid and water; these two may be driven off by a low red heat, and 127 grains of the deutoxide remain in the state of a white powder. The other method is to treat a solution of the protoxide of tin with oxymuriate of lime till it is saturated; this will be found when 59 grains of the protoxide have acquired 7 grains of oxygen, or 113½ grains of the deutoxide have acquired 13½ grains of oxygen, which corroborates the result by the 1st method. This oxide containing just twice as much oxygen as the former, may justly be considered as the deutoxide. No higher oxide of tin has been obtained.

The two oxides, though both white when precipitated, may be distinguished from their different appearances; the first is curdy, the second, gelatinous.

It may be proper to subjoin authorities for these oxides:

Tin

Protoxide

Deutoxide

Cavendish, from the hydrogen

100

113.5

————

Proust (Journ. de Physique 59-341)

100

115

127½.128[10]

Gay Lussac (Annal. de Chimie 80-170)

100

113.5

127.2[11]

Berzelius (Annal. de Chim. 87-55)

100

113.6

127.2[12]

My own, as above

100

113.4

127

13. Oxides of Lead.

There are three oxides of lead now generally recognized, the yellow, the red, and the brown, the proportion of oxygen in each of which has been investigated by several chemists whose results do not well accord with each other. I shall treat of them under the following names, namely the protoxide, the intermediate oxides, and the deutoxide, for reasons which will appear.

1. Protoxide. The yellow oxide of lead is the only one capable of forming salts with acids. Lavoisier found the oxygen of this oxide combined with 100 lead to be 4.47; Wenzel, 10; Proust, 9; Thomson, 10.5; Bucholz, 8; Berzelius, 7.7. This last accords best with my own experience; but it is chiefly from the other combinations of lead, that the weight of its atom as well as that of the protoxide are determined and confirmed, as lead forms several very definite compounds with acids, &c. The quantity of oxygen in the protoxide may be found by several methods, as under.

1st. By dissolving a given portion of the oxide in acetic acid, and precipitating the lead by another metal, as zinc; in this case the oxygen of the lead goes to the zinc which becomes dissolved, and from the loss of weight of the zinc and the proportion of oxygen in zinc oxide being previously known, and the weight of the precipitated lead being found, we have data for determining the oxide of lead. I took 200 measures of acetate of lead solution (1.142), which I knew contained 27 grains of oxide of lead; this being diluted with an equal volume of water, the lead was precipitated by a rod of zinc; in 6 hours an arbor saturni was formed which was collected and well dried; it weighed 21¾ grains, and the zinc rod had lost 7 grains: care must be taken in performing this experiment that all the lead be not precipitated, otherwise the oxide of zinc begins to fall, and the result is uncertain. In the residuary liquid I got 4 grains of sulphate of lead by sulphuric acid. Here then we have the oxygen of 21¾ lead transferred to 7 zinc; but if 7 ∶ 21¾ ∷ 29 ∶ 90 nearly. Now it is known that 29 parts of zinc take 7 of oxygen, therefore 90 lead take 7 of oxygen, and the atom of lead = 90, and the protoxide 97.

I formerly stated the atom of lead 95. VOL. 1, page 260.

2. By dissolving 180 grains of lead in nitric acid in a small thin capsule, and heating it till the salt was quite dry, I got 288 grains of salt, weighed in the capsule; 36 grains of this salt yielded 24¼ yellow oxide by a low red heat = 22½ lead. This gives 90 lead to 7 oxygen.

3d. Again, 36 grains of the above salt, dissolved in water, precipitated by ammonia, and well washed on a filter, gave 23+ grains of oxide separated from the filter, and this had acquired 1 grain, making 24+ grains of oxide from the 22½ lead as before; the residue of liquid gave no signs of lead by hydrosulphuret of ammonia. The same quantity of salt precipitated by an excess of lime water gave only 22 grains of oxide; but hydrosulphuret of ammonia precipitated 2+ grains of sulphuret of lead from the clear liquid.

II. Intermediate oxide or oxides. Minium or red lead, &c. Minium is an article of commerce used as a pigment and for various other purposes. It is made by exposing the yellow or protoxide of lead finely pulverized to a low red heat in a current of air, and constantly stirring the oxide so as to expose fresh particles to the air. In two days the yellow oxide is converted into the red. Several authors observe that red lead usually contains 1, 2, or more grains per cent. of impurities insoluble in nitric and acetic acids; the specimen I used however was so pure as not to leave more than ⅓ of a grain per cent. of insoluble matter after being heated red and treated with dilute nitric acid.

Some of the most remarkable properties of red lead are, 1st. It is never obtained in combination with any acid; 2d. It yields oxygen gas when exposed to a bright red heat or when treated with concentrated sulphuric acid, and is in both cases reduced to the protoxide; 3d. When treated with dilute nitric acid it is dissolved in part, but constantly leaves an insoluble brown residuum, which is the deutoxide, as will be shewn; the weight of the deutoxide obtained is by my experiments 20 per cent. and the part in solution is found to be the protoxide; 4th. When treated with muriatic acid, muriate of lead is formed and oxymuriatic acid given out; 5th. When treated with dilute acetic acid or cold concentrated acetic acid, ½ of the oxide is dissolved and the remainder is still red, its colour being rather improved; if concentrated acid be used and boiling heat applied, then ⅘ of the whole oxide is dissolved and ⅕ remains of brown oxide, the same as with nitric acid.

Some of the above facts are new, and may contribute to elucidate this most curious oxide, which scarcely has a parallel. Proust is the only author I know who has given a plausible conjecture concerning the peculiar nature of this oxide. He supposes it a compound of the yellow and brown oxides. This I believe is the fact; but it will be found I apprehend to be a compound of 1 atom of oxygen with 6 of the yellow oxide, as will appear from what follows.

Respecting the quantity of oxygen in the red oxide, Lavoisier finds 9 oxygen to 100 lead, Thomson 13.6, and Berzelius 11.55. This last is partly from experience and partly from a supposed analogy, that the successive oxides of the same metal contain oxygen as 1, 1½ and 2 respectively; and having found (I believe) correctly, that the brown oxide contains just twice as much oxygen as the yellow, this ingenious and generally accurate author adopts the theoretic inference in this instance at least prematurely, and concludes the red oxide is the mean between the yellow and the brown. But we must appeal to experience.

It has already been stated that when red lead is exposed to heat, oxygen gas is given out, and it may be added, a small trace of water; and yellow oxide remains.

This experiment requires considerable skill. If too great a heat is used, a part of the lead is reduced or revived as it is termed; if too little heat, then a part of the red lead remains unaltered. In performing this experiment I use a small clean iron spoon to hold the red lead, and cover it by another iron spoon; the whole is then held by a pair of tongs in a red fire till the spoon exhibits a uniform moderate red, and some time after.

It is then withdrawn and cooled, and the oxide weighed. The average loss of weight is nearly 2 grains per cent. If only 1 grain or less, a considerable portion of red oxide remains mixed with the yellow; if 3 or more grains, then the margin of the oxide exhibits particles of lead amounting to ⅒, less or more, of the original weight; this can be easily separated from the oxide if necessary, but it is apt to adhere to the iron; when red oxide remains, it is so mixed with the yellow as not easily to be separated, but its quantity may be determined by nitric acid, which dissolves the yellow, and ⅘ of the red, leaving a residuum of brown oxide, from which the quantity of red is inferred. Now if the loss of weight of 100 red oxide be only 2 grains, and a part of that be water, it is impossible that 115.55 should lose 3.85 grains of oxygen, according to Berzelius. Another experiment, equally decisive of the question, is to determine the quantity of oxygenous gas to be obtained by heat or acids from a given weight of red lead. In one experiment made with great care, 500 grains of red oxide gave 6 grains of oxygenous gas by sulphuric acid; in another, 200 yielded 2½ grains. In order to vary the mode of determining the quantity of oxygen, into 210 measures of test green sulphate of iron solution, (1.156) = 16.8 green oxide, put 160 grains of minium; to this was added dilute muriatic acid more than sufficient for the minium: The oxymuriatic acid from the oxygen of the minium was instantly seized by the oxide of the iron, the whole of which was found by precipitation to be changed from green to red and an excess of oxymuriatic acid appeared. Now 16.8 oxide would require 1.86 oxygen to become red, which it must have acquired from 160 of red lead; or 100 red lead yielded 1.2 oxygen, the same proportion as by sulphuric acid. These experiments point out 1.2 oxygen in 100 red lead as the excess which converts the yellow to the red oxide. Were any doubt to remain on the subject, the experiment with nitric acid and red oxide will remove it. If the red oxide contained a mean of oxygen between the yellow and the brown, when it is treated with nitric acid more than 50 per cent. of brown oxide would be obtained instead of 20, which is contrary to all experience. It must be observed that Berzelius informs us he extracted the yellow oxide, mechanically mixed (as he conceives) with the red oxide, by digestion with dilute acetic acid; but he does not inform us how much per cent. his minium was reduced by this operation. From what is stated above, it appears that about ½ of the whole is thus dissolved. The remaining half would then contain double the quantity of oxygen and brown oxide per cent. that the original did. Still these quantities are inadequate to explain the phenomena. Besides it cannot be admitted that a red and a yellow powder can be intimately mixed in equal quantities and the mixture not be distinguishable without difficulty from the red one, and be altogether different from the yellow. We must then conclude that the minium of commerce (such as I have used) is a true chemical compound.

Grounding our reasonings upon the preceding facts, there are but two suppositions that can be considered as plausible, respecting the constitution of the red oxide. It may be 1 atom of oxygen and 5 of yellow oxide, or 1 atom of oxygen and 6 of yellow oxide. The former would give 1.4 per cent. extra oxygen in 100 red oxide, and 21 brown oxide; the latter would give 1.2 per cent. extra oxygen and 18 brown oxide. I adopt the latter supposition; because it agrees with experiment in regard to oxygen, and gives the brown oxide a little lower than experiment, as may be expected on two accounts; first, the residue of brown oxide contains the insoluble dross of the red oxide (which was very small however, as stated above); and, second, unless a considerable excess of nitric acid be used, or long digestion, a small portion of the red oxide escapes decomposition. Another and still more important consideration, as to the question whether 5 or 6 atoms, is the equal division of the red oxide by the operation of cold acetic acid; it reduces the 1 oxygen and 6 yellow oxide to 1 and 3 atoms; whereas if we adopt the other, we must conclude it reduces the 1 and 5 to 1 and 2½, a position that cannot well be reconciled to the atomic theory.

According to this conclusion then the red oxide of lead or minium of commerce is constituted of 1 atom of oxygen holding 6 atoms of yellow oxide together; or it is composed of 100 lead and 9.07 oxygen. When it is digested in cold acetic acid the residuum constitutes another oxide consisting of 1 atom of oxygen and 3 of yellow oxide, or 100 lead and 10.4 oxygen, possessing the same colour as the former, but distinguishable by its not being acted on by cold acetic acid, and by its containing twice as much brown oxide and extra oxygen as minium. No doubt the other intermediate oxides of 1 to 4 and 1 to 5 exist, and are all alike red; but have not perhaps any remarkable distinctions besides their containing different proportions of oxygen and brown oxide. Whether an oxide consisting of 1 oxygen and 2 yellow oxide exists, I have not discovered; but that 1 oxygen and 1 yellow oxide are found united, appears below.

III. Deutoxide. This is the flea-brown oxide mentioned above. It may also be obtained by treating solutions of salts containing the yellow oxide by oxymuriate of lime, in which case the oxide is precipitated, leaving the acid in the liquor, a proof that it is insoluble in acids. Its more remarkable properties are: 1st. like the red oxide, when heated to a low red, or treated with sulphuric acid, it yields oxygenous gas, and more copiously; it is thus reduced to the yellow oxide: 2d. with muriatic acid it yields oxymuriatic acid in great plenty and muriate of lead: 3d. it detonates when rubbed with sulphur in a mortar.

The quantity of oxygen in the brown oxide is stated by Thomson at 25 oxygen to 100 lead, by Berzelius at 15.6 to 100. This last is very nearly right by my experience, and being just double of the oxygen in the protoxide, it warrants us in denominating it the deutoxide. Berzelius finds 100 of the brown oxide lose 6.5 by a red heat so as to reduce it to the yellow; Dr. Thomson finds the loss 9 grains. This difference is easily accounted for; it loses, I find, from 7 to 10 grains per cent. according to the previous degree of dryness; when exposed to a moist atmosphere it attracts humidity; when dried in a temperature of 200° and exposed to red heat immediately after, it does not lose more than 6.5 or 7 per cent. This is corroborated too by the oxygen expelled by sulphuric acid. From 100 grains of brown oxide and sulphuric acid in a gas bottle, I obtained by the heat of a lamp 8.3 oz. of oxygenous gas = 5.3 grains; about 120 grains of grey sulphate of lead were left in the bottle. The oxygen is rather less than was expected; but it must be remembered that 100 grains of brown oxide, obtained in the ordinary way, have the insoluble dross of 500 red oxide in them, which must have some influence in diminishing the production of oxygen.

Though the above might be deemed sufficient to demonstrate the proportion of oxygen in the brown oxide, I was desirous to corroborate the results by oxymuriate of lime. I found repeatedly that 100 grain measures of acetate of lead (1.142) = 13.8 yellow oxide, required 400 measures of oxymuriate of lime = 1 oxygen, to precipitate the whole of the oxide in a brown state. Now if 13.8 ∶ 1 ∷ 97 ∶ 7. Again, into 240 measures of test green sulphate of iron (1.156) = 19 oxide, were put 40 grains of brown oxide of lead, together with a sufficient quantity of muriatic acid to saturate the lead, and discharge the oxygen; after due agitation sulphate of lead was precipitated, and the whole of the oxide of iron was found, when precipitated, to be yellow. But 19 grains oxide of iron require 2+ of oxygen to become yellow; hence the 40 grains brown oxide of lead must have furnished 2+ grains of oxygen to form oxymuriatic acid, which transferred it to the oxide of iron. If 40 ∶ 2+ ∷ 100 ∶ 5+ oxygen, for the excess or second dose of oxygen in 100 brown oxide, such as is obtained by nitric acid along with its impurities; which agrees with the results obtained by the other methods.

14. Oxide of zinc.

When zinc is exposed to a strong heat it burns with a brilliant white flame, and a white powder sublimes, which is the oxide of the metal. When dilute sulphuric acid is poured on granulated zinc, hydrogen gas is produced in great abundance and purity; the metal is oxidized at the expence of the water and dissolved in the acid, the oxide may be precipitated by an alkali; it is white both when precipitated and dried, and when heated does not differ from that obtained by combustion. By a violent heat it runs into glass.

The quantity of oxygen in zinc oxide is, I think, best estimated by the hydrogen gas produced during the solution; it may also be obtained by direct combustion, or by solution in nitric acid and calcination. Dr. Thomson determines the oxygen by comparison of the weights of real sulphuric acid and metallic zinc in a solution of sulphate of zinc, along with the consideration that the proportion of sulphuric acid and oxygen in the metallic sulphates is known; Mr. Cavendish obtained 356 oz. measures of hydrogen from 1 oz. of zinc by solution. I dissolved 49 grains of zinc in dilute sulphuric acid and obtained hydrogen, after the rate of 363 grain measures for 1 grain of zinc = 182 measures of oxygen = .24 grain of oxygen.

The following are the principal authorities for the quantity of oxygen in zinc oxide, in the order of time.

Zinc.

Oxygen

1766.

Cavendish

100

+

23.3

1785.

Lavoisier

—

+

19.6

1790-1800.

Wenzel and Proust

—

+

25

1801.

Desorme and Clement

—

+

21.7

Davy

—

+

21.95

Berzelius

—

+

24.4

Gay Lussac

—

+

24.4

Thomson

—

+

24.42

My own

—

+

24

Now if 24 oxy. ∶ 100 zinc ∷ 7 oxy. ∶ 29 zinc, nearly, which is therefore the weight of an atom of this metal, on the supposition that the oxide is 1 oxygen and 1 metal; and the atom of oxide = 36.

I formerly estimated the atom of zinc at 56 (VOL. 1, page 260). This was occasioned by taking the above as the deutoxide instead of the protoxide. By violently heating the oxide of zinc in a close vessel, Desorme and Clement reduced the oxygen nearly one half, so as to afford a presumption that an oxide with half the oxygen of the common one subsisted. Since that time some observations of Berzelius seem to shew that a suboxide of zinc exists. It does not appear however, that such oxide is ever found in combination with acids; and, granting the accuracy of the observations, it is rather to be presumed to be the semi-oxide, or 1 atom of oxygen and 2 of metal, than the protoxide. No higher oxidation of zinc than the above has yet been obtained, and probably does not exist.

15. Oxides of potassium.

Since writing the articles “potassium and sodium,” in the former volume, a very important essay relating chiefly to these subjects has been written by Gay Lussac and Thenard (a copy of which they were so good as to send me), entitled “Recherches Physico-chimiques, &c.” in 2 VOL.—Many of the most interesting experiments of Davy have been repeated on a larger scale, and a great number of original ones added; these ingenious authors endeavour to sum up the evidences for and against the two hypotheses concerning potassium and sodium, namely, as to their being metals or hydrurets, and upon the whole incline to the former, allowing however, that the facts afford great plausibility to both. One thing they seem to have discovered and established, that the new bodies or metals admit of various degrees of oxidation, and of course these products have a claim to be classed amongst oxides in general though the nature of their bases may still be an object of dispute.

They find three oxides of potassium; the lowest degree is obtained by exposing potassium to atmospheric air in a small bottle, with a common cork; a gradual oxidation takes place; a blueish grey brittle product is obtained; there does not appear however, to be any proper limit to this oxidation besides that which they admit as characterizing the second degree or potash, which degree of oxidation may always be immediately obtained by placing potassium in contact with water. This I think should be called the protoxide and considered as 1 atom of potassium, and 1 of oxygen; before this point it is potassium and potash mixed or perhaps combined.

Besides these there is another obtained by burning potassium in oxygen gas at an elevated temperature; this oxide is yellow, fusible by heat, and crystallizes in lamina on cooling; it contains three times as much oxygen as potash; put into water it is suddenly decomposed, giving out ⅔ of the oxygen in gas and becoming potash. Very probably an oxide containing twice as much oxygen as potash might be formed with some mark of discrimination, by uniting 18 parts potassium with 56 of yellow oxide, but this has not yet been done.

According to these conclusions the weights of the oxides of potassium may be stated as under.—Potassium 35, protoxide or potash 42, deutoxide (supposed to exist) 49, and the yellow or tritoxide 56. Hence we have

Potassium.

Oxygen

Protoxide (potash)

100

+

20

Gay Lussac & Thenard

19

Davy

Deutoxide

100

+

40

(unknown)

Tritoxide

100

+

60

Gay Lussac & Thenard

One feels unwilling to admit of a tritoxide, (and that perhaps the only one existing,) when the deutoxide is unknown, were it not upon good authority. The obscurity on this subject may be removed by future experiments.

It may be proper to add that Gay Lussac and Thenard concur with Davy in assigning a much greater saturating power to potassium and sodium than to the fused hydrates of potash and soda of equal weights. From the table, Recherches, Tom. 2, p. 214, it may be deduced that 35 potassium require as much sulphuric acid to saturate them as 50 or more of the hydrate of potash; and that 21 sodium are equivalent to 36 or 37 hydrate of sodium. If these results are accurate, the weights of potassium and sodium, considered as hydrurets, cannot be as we have deduced them at pages 486 and 503, VOL. 1, namely, 43 and 29 respectively, but 35 and 21, as at page 262.

16. Oxides of sodium.

Gay Lussac and Thenard find a suboxide of sodium in the same way as that of potassium, and it is probably a compound of soda and sodium: the remarkable oxidation which produces soda is, I should imagine, the protoxide or one atom to one, as obtained by placing sodium in contact with water. A higher oxide is obtained as with potassium, by burning sodium in oxygen gas with a vivid heat. It resembles the yellow oxide of potassium in its appearance and properties. The degree of oxidation varies in the different experiments from 1¼ to 1¾ times the oxygen of soda. It is probably a combination of the protoxide and deutoxide. Hence the oxides of sodium may be as under; reckoning the atom of sodium 21, and soda 28.

Sodium.

Oxygen.

Protoxide (Soda)

100

+

33⅓

Intermediate oxide

100

+

50

17. Oxide of bismuth.

Only one oxide of bismuth is known, and the proportion of its parts has been gradually approximated by Bergman, Lavoisier, Klaproth, Proust, and others. Berzelius mentions a purple oxide obtained by exposing bismuth to the action of the atmosphere; but as no experiments have been made upon it, we cannot adopt it at present. According to Klaproth and Proust, 100 bismuth unite with 12 oxygen; but by the more recent experiments of Mr. J. Davy and Lagerhjelm 100 bismuth take 11.1 or 11.3 oxygen. If we adopt this last, which is doubtless near the truth; we shall have 11.3 ∶ 100 ∷ 7 ∶ 62 for the weight of the atom of bismuth, on the supposition that the compound is the protoxide or 1 atom of metal to 1 of oxygen. My former weight of bismuth was 68 (page 263), which is clearly too high.

Bismuth is best oxidized by nitric acid. Part of the oxide combines with the acid and part precipitates in the state of a white powder; if the whole be gradually heated, the acid is driven off, and at a low red the oxide remains pure; it is fused into glass and of a red or yellow colour, according to the heat employed. Bismuth may also be oxidized by heat in open vessels; yellow fumes arise which may be condensed and are found to be the oxide.

18. Oxides of antimony.

Considerable difference of opinions exists with regard to the oxides of antimony. Proust finds two oxides which he determines to consist, the first, of 100 metal + 22 or 23 oxygen; the second of 100 metal + 30 oxygen. Thenard finds 6 oxides: J. Davy two oxides, namely, 100 metal + 17.7 oxygen, and 100 + 30 oxygen. Berzelius infers from his experiments that there are 4 oxides of antimony, the first containing 4.65 oxygen, the second 18.6, the third 27.9, and the fourth 37.2 of oxygen on 100 metal. He admits however that the oxide obtained by boiling nitric acid on antimony and expelling the superfluous acid by a low red heat, consists of 100 metal + 29 to 31 oxygen, as determined by Proust and others. This is certainly the most definite of the oxides, next to that which is obtained from the solution of antimony in muriatic acid. This last may be had by pouring water into a solution of muriate of antimony; a white powder precipitates, which is the oxide with a little muriatic acid; the acid may be abstracted by boiling the precipitate in a solution of carbonate of potash. This oxide is a grey powder, and fusible at a low red heat. It enters exclusively into various well known compounds, as the golden sulphur of antimony, antimoniated tartrate of potash, &c. Its constitution, according to Proust, is 100 metal + 23 oxygen; but J. Davy finds only 17.7 oxygen, and Berzelius 18.6. As this oxide possesses the most distinct features, and besides is the most important, it is desirable its constitution should be ascertained without doubt. From several experiments I made on the precipitation of antimony by zinc, I conclude the oxide contains about 18 oxygen on 100 metal. I took the common muriate of antimony with excess of acid, and immersed a rod of zinc into it, covering the whole with a graduated bell glass. Hydrogen gas was produced by the excess of acid, and its quantity was ascertained; the antimony was in due time precipitated, and when the operation ceased, the loss of zinc and the weight of antimony were found. For instance, to 50 measures of 1.69 mur. ant. 60 water were added, no precipitation was observed; a zinc rod was put in and the whole covered by a bell glass, over water; in a few hours the operation had ceased, and there appeared 3480 grain measures of hydrogen gas generated; the dried antimony weighed 25½ grains, and the zinc had lost 29 grains. Now 3480 hydrogen require 1740 of oxygen = 2.3 grains in weight. But 29 zinc require 7 oxygen; therefore the zinc must have got 4.7 oxygen from the antimony; that is, 25.5 antimony were found united to 4.7 oxygen; this gives 100 antimony + 18.4 oxygen. I conclude then that the error is with Proust; and this appears to be confirmed by the consideration that Proust himself obtains only 86 oxide of antimony from 100 sulphuret, which he allows to contain 74 antimony; now if 74 ∶ 12 ∷ 100 ∶ 17 nearly. I am therefore inclined to adopt 18 for the oxygen which combines with 100 antimony to form the grey oxide. Whether this is the protoxide or deutoxide may be disputed; and the facts known concerning the other oxide or oxides will scarcely determine the case: but the proportions of the muriate and sulphuret of antimony accord much better with the former supposition. Now if 18 ∶ 100 ∷ 7 ∶ 39, for the weight of the atom of antimony; I prefer the weight 40, deduced from the sulphuret, as announced in VOL. 1, page 264.

The oxide which contains 30 on 100 must be 2 atoms of the deutoxide and 1 of the protoxide united. What Berzelius calls the white oxide or antimonious acid, may be 1 atom of each oxide united, containing 27 oxygen on the 100. The oxide supposed to contain 36 or 37 oxygen on 100, and which must be considered as the deutoxide, has not been proved to exist separately. My efforts to procure it have failed as well as those before mine: by treating muriate of antimony with oxymuriate of lime I have obtained oxides of 30 on the 100, but never much higher. Whenever a greater proportion of oxymuriate of lime is added, the smell of the gas becomes permanent.

Antimony exposed to a red heat in a current of common air or oxygenous gas takes fire, and white fumes arise formerly called flowers of antimony; this oxide contains 27 or 30 oxygen on 100 metal.

Antimony thrown into red hot nitre is oxidized rapidly; the remaining powder, washed in water, is found to be a compound of oxide of antimony and potash. Berzelius calls the oxide the antimonic acid, and the salt the antimoniate of potash. It consists, according to his experience, of 100 acid and 26.5 potash. A similar salt formed between the antimonious acid and potash is constituted of 100 acid and 30.5 potash.

19. Oxide of tellurium.

We are chiefly indebted to Berzelius for the proportions in which tellurium combines. He finds 100 tellurium unite to 24.8 oxygen. Also that 201.5 tellurate of lead gave 157 sulphate of lead. This last contains 116 oxide of lead, which must therefore have combined with 85.5 of the oxide of tellurium. Hence 97 oxide of lead would combine with 71.5 oxide of tellurium = 57½ tellurium + 14 oxygen. Whether this oxide of tellurium is the protoxide or deutoxide, is somewhat uncertain. The atom of tellurium will weigh 57½ in the latter case, but only 28 or 29 in the former. The analogy of the oxide to acids favours the notion of a deutoxide; but the facility with which the tellurium is volatilized by hydrogen is in favour of the lighter atom. The oxide is a white powder; it is produced by dissolving the metal in nitro-muriatic acid and precipitating by an alkali.

20. Oxides of arsenic.

There are two distinct combinations of arsenic and oxygen; the one has been long known as an article of commerce under the name of arsenic. It is a white, brittle, glassy substance, obtained during the extraction of certain metals from their ores. Its specific gravity is about 3.7. According to Klaproth boiling water dissolves from 7 to 8 per cent. of the oxide of arsenic; but on cooling it retains only about 3 per cent.; and this I find is gradually deposited on the sides of the vessel till it is reduced to 2 per cent. or less in cold weather, and by some months standing. Water of 60° or under dissolves no more than ¼ per cent. of the oxide. At the temperature of about 400° the oxide sublimes. This oxide combines with the alkalies, earths, and metallic oxides somewhat as the acids do, but does not neutralize them, and in other respects it is destitute of acid properties; as for instance, it does not affect the colour tests. It is extremely poisonous.

The other oxide is obtained by treating either the white oxide or pure metallic arsenic with nitric acid and heat. One hundred grains of white oxide require two or three times their weight of nitric acid, of 1.3, to oxidize them. The new oxide is produced in a liquid form; from which the excess of nitric acid may be driven by a low red heat, and the oxide is obtained pure in the form of a white opake glass, which soon becomes liquid by attracting moisture from the atmosphere. This oxide, discovered by Scheele, has all the properties of acids in general, and is therefore denominated arsenic acid. When just fluid by attracting moisture it has the sp. gravity 1.65 nearly. It is represented as equally poisonous with the white oxide.

The proportions of the elements in these two oxides have been investigated with considerable success. Proust finds the white oxide constituted of 100 metal and 33 or 34 oxygen, and the second of 100 metal with 53 or 54 oxygen: with these results those of Rose and Bucholz nearly agree. Thenard finds 100 + 34.6 for the white oxide, and 100 + 56.25 for the acid: and Thomson 100 + 52.4 for the acid. Berzelius however, infers from his recent experiments that the oxide consists of 100 metal + 43.6 oxygen, and the acid of 100 + 71.3; these last results I have little doubt are incorrect from my own experience.

It appears that when arsenic is oxidized by nitric acid, 100 parts yield from 152 to 156 of acid, dried in a low red heat. The differences may in part be owing to the metal being partly oxidized at the commencement of the operation. On this account I should suppose 55 or 56 to be the proper quantity of oxygen united to 100 metal to form the acid. Proust and Thenard both found that 100 white oxide, when converted into acid by nitric acid, gave 115 or 116. I have found the same. Now if 116 ∶ 100 ∷ 156 ∶ 134; hence the white oxide of arsenic must contain 100 metal to 34 oxygen, if the data be correct; or the metal and oxygen are as 3 to 1 nearly. It is highly improbable that any inferior oxide subsists, as no traces of such have been found, if we disallow a conjecture of Berzelius on the subject. The white oxide of arsenic must then be considered as the protoxide, and the atom of arsenic must weigh 21 nearly, and that of the protoxide 28.

It is plain the other is not the deutoxide, as it does not contain twice the oxygen of the protoxide; but as the proportion of oxygen in it is to that of the protoxide, as 5 ∶ 3, it may be a compound of 2 atoms of deutoxide, and 1 of protoxide; that is, it may be the superarseniate of arsenic, if we consider the deutoxide as the acid, and the protoxide as the base. According to this view, the compound oxide, or arsenic acid of Scheele, is constituted of two atoms of the deutoxide, weighing 70, and 1 atom of the protoxide weighing 28, together making 98, for the weight of an atom of arsenic acid, = 63 arsenic + 35 oxygen: and 100 arsenic take 55.5 oxygen to form the acid, agreeably to the above recited experiments. Singular as this conclusion may appear, the truth of it is put beyond doubt, I think, by the following experiments.

I have repeatedly found that 28 parts of white oxide in solution are sufficient to throw down 24 parts of lime, from lime water, so as to produce 52 parts of arsenite of lime, and leave the water free from both elements. This confirms the notion of the atom of protoxide weighing 28.

If to 24 parts of lime dissolved in water we put 98 parts of dry arsenic acid, the compound remains in solution, and is perfectly neutral to the colour test, but so that the addition of a small quantity of either ingredient disturbs the neutrality. If to this solution 24 parts of lime dissolved in water be added, the compound remains a limpid solution, but is very limy to the test. If to this we put in like manner, 24 parts more of lime, the whole compound is thrown down, and yields, when dried, 170 parts of arseniate of lime, the liquid being now free from both elements. Here we see first, two atoms of the deutoxide, neutralized by two atoms of base, namely, 1 of arsenic oxide, and 1 of lime; but (second), when one atom more of lime is added, an union of 2 deutoxide, and 3 of base is effected, which of course is an alkaline salt; when (third) more of lime is added, the 2 deutoxide and the 1 protoxide each attach 1 of lime, and form a still more alkaline salt, which being insoluble, is wholly thrown down, most probably in a compound state of 98 parts arsenic acid, combined with 72 parts lime.

In like manner, I find that 42 parts of potash, 28 of soda, and 12 of ammonia, severally neutralize 98 parts of arsenic acid.

1st.

24 lime

+

32.7

arsenic acid

= insoluble arseniate

2d.

—

+

49

—————

= soluble arseniate

3d.

—

+

98

—————

= neutral arseniate

It is a remarkable fact, that when neutral arseniate of potash and nitrate of lead are mixed together to mutual saturation, the precipitate is found to consist chiefly of arsenic acid and oxide of lead, in proportion of 1 of acid to two of oxide, (that is, 98 ∶ 194, or 100 ∶ 198); which does not differ much from the determination of Berzelius.

I find however, only one fourth of the nitric acid in the residuary liquid in a free state; which leads me to suspect that the precipitate is a compound of subnitrate and arseniate of lead, in which the arsenic acid and lead are in due proportion, or 98 acid, to 97 oxide. This consideration may be properly resumed hereafter.

Hence we conclude, the atom of arsenic weighs 21 (and not 42, as at page 264, VOL. 1), that of the protoxide of common white arsenic, 28; and that of arsenic acid = 98, being a compound of 2 atoms of deutoxide, and 1 of protoxide. Or,

100 Arsenic

+

33.3

oxygen

= 133.3 protoxide

—

+

55.5

——

= 155.5 arsenic acid

21. Oxides of cobalt.

There are at least two oxides of cobalt, the one blue, the other black. Authors differ as to the proportions of the elements. Proust states the blue oxide to consist of 100 metal, and 19 or 20 oxygen, and the black of 25 or 26 oxygen. Klaproth finds in the blue, 100 metal and 18 oxygen. But Rolhoff according to Berzelius, finds 100 metal and 27.3 oxygen in the blue oxide, and 40.9 in the black. I have taken some pains to investigate these oxides, and have been able to satisfy myself in a good degree, respecting their constitution. The blue or protoxide consists of 100 metal and 19 oxygen, and the black oxide of 100 metal, and 25 or 26, very nearly as Proust determined.

Protoxide. By repeated trials I have found, that if 37 parts of metallic cobalt be treated with the due quantity of nitro-muriatic acid, and a heat of 150°, a rapid solution takes place, and a disengagement of pure nitrous gas; this being carefully collected, it will be found to weigh 8 grains, and of course corresponds to 7 grains of oxygen; hence 37 cobalt, unite to 7 oxygen, to form 44 of the blue oxide; and as this is the only oxide that combines with acids, it must be considered as the most simple or protoxide, being 1 atom of metal (37), and 1 of oxygen (7). The estimation of the atom of cobalt at 50 or 60, (page 265), must therefore be corrected.

Compound oxides. When the blue oxide of cobalt is precipitated from a solution, by an alkali or lime water, and oxymuriate of lime is gradually dropped in, the precipitate changes colour rapidly; it passes from blue to green and olive, thence to a dark bottle green, and finally becomes black; oxygen gas is given out copiously when an excess of oxymuriate of lime is used. I find the additional oxygen requisite to convert the blue to the black oxide is what Proust states it, namely, ⅓ of that necessary to form the blue; hence it must be considered as a compound of 1 atom of oxygen and 3 of the protoxide. Probably the other coloured oxides are 1 to 4, 1 to 5, &c. The protoxide is blue when precipitated, but it is supposed to contain water, or to be a hydrate; as it is dark grey when heated. The blue oxide in a short time after precipitation being still under water, changes to a yellowish or dead-leaf colour; which also appears to be a hydrate of the protoxide, as it dissolves in acids without giving out gas, and yields the blue oxide by an alkali. According to Proust, this hydrate contains 20 or 21 per cent. water. If we suppose the blue to be 1 atom oxide, and 1 water, the yellow hydrate may be 1 water and 2 of the proto-hydrate; or 88 oxide, and 24 water, which will be nearly 21 per cent. water.

The black oxide gives out oxygen gas by a red heat, and is reduced to the grey oxide: it forms oxymuriatic acid, with muriatic acid, and the protoxide remains in solution.

(See Tassaert.—An. de Chimie 28; Thenard, 42; and Proust, 60.)

22. Oxides of manganese.

One of the oxides of manganese being a natural production, and sometimes of great purity, and the metal not being obtainable without skill and labour, it may be most convenient to adopt the inverse method in our investigations; that is, to trace out the atom of metal from its oxides.

Native oxides of manganese. Of late, I have met with excellent specimens of this oxide; they are in masses of a grey, crystalline appearance, sp. gr. 4, easily pulverizable into a greasy, shining, dark grey powder. They are nearly pure oxide; but the more common sort is blacker, and contains less or more of siliceous earth. Some specimens are very harsh, require an iron mortar to pulverize them, and contain 50 or upwards per cent. of siliceous earth. Of the common sort when pulverized, the black inclining to blue, is generally preferable to the black inclining to brown. I have not observed any earthy carbonates mixed with the oxide of manganese. Amongst various specimens I obtained the following analyses.

Oxide.

sand and

insoluble

matter.

1.

Grey, crystallized oxide

100

——

2.

Pulverized black oxide, from

80

20

a bleacher, reputed good

3.

Another specimen, in the lump

77

23

4.

A light brown oxide

47

53

5.

A sparry oxide, abounding with

27

73

flint; black brown when pulverized

Some of the chemical characters of the native oxide of manganese are, its giving oxygen gas by a red heat, its insolubility in nitric and sulphuric acids, and its solubility in muriatic acid, but with the accompanying circumstance of disengaging oxymuriatic acid.

All these facts shew that it is of the higher order of oxides, or analogous to the brown and red oxides of lead.—The muriatic acid solution abovementioned, contains an oxide of an inferior degree, which is soluble in all acids, and which is the only oxide of manganese that appears to be soluble in acids. If this be considered, (as it may with the greatest probability), the protoxide, then it will appear from what follows, that the common native manganese is the deutoxide, and that there is an intermediate one, which contains a mean quantity of oxygen.

Protoxide. This may be obtained in solution with muriatic acid as above, from the native oxide. Or the black oxide may be mixed with sulphuric acid into a paste, and heated in an iron spoon to redness; the mass being lixiviated, a solution of the protoxide in sulphuric acid is obtained, generally with a slight excess of the acid; in this process heat and the presence of sulphuric acid, expels the redundant oxygen of the black oxide, and reduce it to the protoxide, which hence becomes soluble. If in either of these solutions any oxide of iron be present, whether from the manganese, or acquired during the manipulation, it is easily discovered and separated, as I have frequently found. Into any solution containing a mixture of the oxides of manganese, the green oxide of iron, and the red oxide of iron, let lime water be gradually poured; the red oxide of iron will be first precipitated, next the green oxide, and lastly the oxide of manganese, which may hence be separated from each other. Iron may also be discovered and separated by carbonate of potash, which must be dropped into the solution as long as any coloured precipitate appears; as soon as it has subsided, the snow-white carbonate of manganese succeeds. This white carbonate may be very conveniently used for obtaining solutions of pure manganese in any of the acids.

When a solution of pure manganese is treated with lime water, or ammonia, a light buff oxide, not much differing in appearance from the yellow oxide of iron, is obtained. This oxide is soluble in all acids, when recently precipitated; but, such is its avidity for oxygen, with moderate agitation of the liquid it acquires oxygen and becomes brown, when it ceases to be totally soluble; if dried in the air quickly, it becomes brown and obtains considerable oxygen. The buff oxide recently precipitated, is probably a hydrate; for, when the white carbonate of manganese is heated gradually to red, the water and the acid are both expelled, and a grey powder remains; this is quite black on the surface of the mass, if exposed to the air during the process. Probably this grey powder is the pure protoxide; it is soluble in acids, except the black powder at the surface; perhaps but for the oxygen of the air, the protoxide would be nearly white.

From its combinations with sulphuric and carbonic acids, I find the weight of an atom of the protoxide to be 32, or the same as that of iron. Dr. John, a German chemist, who seems to have investigated these salts with more attention than any other person, has deduced nearly the same results. (Annals of Philos. 2-172). He finds 33⅔ sulphuric acid + 31 oxide, and 34.2 carbonic acid + 55.8 oxide; that is, when reduced to compare with my results, 34 sulphuric acid + 31.3 oxide, and 19.4 carbonic acid + 32 oxide. This near agreement may be considered as a confirmation of the accuracy of both. Dr. John finds, as I have done, three distinct oxides of manganese, the greyish green, the brown, and the black. The first of these is the only one that combines with acids; but we differ materially as to the quantity of oxygen in each. He found manganese decompose water at the ordinary temperature; by oxidizing the metal this way, 100 metal acquired 15 oxygen to constitute the protoxide; according to this, 28 metal + 4 oxygen would make 32 protoxide; but this conclusion would be so contrary to all analogy, that it cannot be admitted as satisfactory. The probability is, that the manganese must have contained a little oxygen at the commencement of the experiment. The general analogy of manganese to iron, lead, &c. requires that 32 protoxide should contain 7 oxygen. If this be allowed, we have the atom of manganese = 25, and not 40, (as at page 266, VOL. 1), the same as that of iron: and this conclusion is corroborated by what follows.

2. Intermediate or olive brown oxide. This may be formed by combining oxygen directly with the buff or protoxide recently precipitated, and still remaining in the liquor; simple agitation in oxygenous gas or common air for a few minutes, is all that is requisite. Or it may be instantly formed by treating the same moist protoxide with liquid oxymuriate of lime. Or it may be had by exposing the purest black oxide to a bright red heat for some time, when it will lose 9 or 10 per cent. and there will remain the olive brown oxide.

To find the proportion of oxygen absorbed, I precipitated 3.2 grains of the protoxide by lime water; the liquid containing the oxide was put into a well stoppered bottle of oxygen gas; on agitation the oxide changed colour fast, from buff to brown; in a short time it absorbed 260 grain measures of gas = .35 of a grain in weight, and then ceased to absorb. In another experiment, 3.2 grains of precipitated protoxide, took 100 measures of a solution of oxymuriate of lime, containing .35 per cent. of oxygen, (that is, 1.45 oxymuriatic acid). Hence as 32 take 3.5, 64 must take 7; which shews the brown oxide to be a compound of 1 atom of oxygen, and 2 of the protoxide.

The characters of this oxide are, its olive brown colour, its insolubility in nitric and sulphuric acids, without heat or deoxidation, and its solubility in muriatic acid after the evolution of oxymuriatic acid. By long exposure to the air, it is gradually changed, in all probability into the black oxide.

3. Deutoxide. In order to determine the quantity of oxygen deducible from the purest native oxide of manganese, to convert it into protoxide, I have successfully adopted the two following methods. 1st. Let 39 or 40 grains of the oxide be mixed with 60 common salt; to this add 80 grains of water, and 120 grains weight of strong sulphuric acid, in a gas bottle. The heat must be gradually raised to boiling, and the oxymuriatic acid gas may be received in a quart of lime water. This will be found sufficient to convert 800 measures of test green sulphate of iron (1.156) into red; that is, it will produce 29 grains of oxymuriatic acid, which will cause 7 grains of oxygen, to unite to the green oxide of iron. Now 100 measures of 1.156 sulphate, according to some recent experiments of mine, contain 8 grains of green oxide, (I estimated the sp. gr. of test sulphate, heretofore at 1.149); hence 800 contain 64 oxide, and these require just 7 grains of oxygen to be united to them, to form the red oxide, as has been shewn, page 34. In the above experiment, the 39 grains of oxide, will be found to vanish or be dissolved, if pure, and to yield 32 grains of protoxide, making up with the 7 grains of oxygen, the original weight. Hence we have 39 grains of the oxide resolved into 32 protoxide, and 7 oxygen. If then we allow 32 protoxide, to contain 7 oxygen, it appears that 39 grains of the native oxide, consists of 1 atom manganese (25), and two atoms of oxygen (14); or it is the deutoxide of the metal. 2d. A more direct and expeditious method, of transferring the oxygen from the manganese to the iron, is as follows: Let 39 grains of pure grey shining oxide, be mixed with 800 of test green sulphate of iron; to this mixture let 25 or 30 grain measures of strong sulphuric acid be added: after stirring the mixture for 5 minutes, the oxide of manganese will be completely dissolved, and, on precipitating the oxide of iron gradually, by lime water, it will be found to be wholly yellow or buff; shewing that 7 grains of oxygen have been transferred from the oxide of manganese to that of iron.—If more green sulphate of iron be used, then the surplus of the oxide will be thrown down green; the order of precipitation being the yellow oxide of iron, the green oxide of iron, and lastly, the yellow or buff oxide of manganese, as has been stated. This affords an easy and elegant method of appreciating the different oxides of manganese of commerce; and it was in this mode, the valuations of the specimens in the above table were made.

The proportions of the three oxides are then as under:

Manganese

Oxygen

Protoxide

100

+

28

— buff; soluble in acids.

Intermediate oxide

—

+

42

— brown; insoluble.

Deutoxide

—

+

56

— black; insoluble.

It may be proper to subjoin the results of others, who have investigated the oxides of manganese. Bergman finds 3 oxides, containing 100 metal + 25, 35, and 66.6 oxygen; Dr. John finds 3 oxides, containing 100 metal + 15, 25, and 40 oxygen: Berzelius finds 5 oxides, containing 100 metal + 7, 14, 28, 42, and 56 oxygen; and Davy finds 2 oxides, containing 100 metal + 26.6, and 39.9 oxygen, respectively.

23. Oxides of chromium.

There appear to be at least two oxides of chromium, one or other of which is found in combination with the oxides of lead or iron, but hitherto so very sparingly that few chemists have had an opportunity of investigating the proportions of chrome and oxygen, in the oxides of chromium. The chief sources for information on this subject, are essays by Vauquelin, An. de Chimie, VOL. 25 and 70; by Tassaert, ibid. 31; by Mussin Puschin, ibid. 32; by Godon, ibid. 53; by Laugier ibid. 78, and by Berzelius, Annal. of Philosophy, 3.

The oxides of chromium, as might be supposed, are distinguished for the colours which they possess and impart to the compounds into which they enter. One of the oxides is green; it gives colour to the emerald. The other is yellow, dissolved in water, but deep red when crystallized, and possesses the characters of an acid; it unites with alkalies, earths, and metallic oxides; it was first found in Siberia, in combination with the oxide of lead, a salt now denominated chromate of lead, of a splendid yellow colour, inclining to orange or red. Since then, the chromate of iron, has been found in France, America, and Siberia, with a prospect of greater abundance.

In order to investigate the weight of the atom of chromic acid, it is necessary to attend to such of the chromates as have been carefully examined. The chromates of potash, barytes, lead, iron, and mercury, are those with which we are best acquainted.

Vauquelin has given us the components of the native chromate of lead by analysis, and those of the artificial chromate by synthesis; the results do not accord very nearly: for, according to the analysis corrected by the modern science,

Chromate of lead

=

62

acid

+ 97 oxide

By synth. chromate of lead

=

57½

—

+ 97  —

Berzelius however, has more lately given us the results of his experience, both analytical, and synthetical; and he finds both to give chromate of lead nearly = 44 acid + 97 oxide.

Chromate of barytes

(Vauq.)

=

47.8

acid

+

68

barytes

Ditto

(Berz.)

=

44

—

+

68

—

Native chromate of iron

(Vauq.)

=

45

acid

+

35½

oxide

Ditto

(Laugier)

=

55

—

+

35½

—

Having received a small portion of chromate of potash in solution, from a chemical friend (J. Sims), I endeavoured to satisfy myself, as far as my materials would go, as to the nature and proportions of the chromates. The solution was of the sp. gr. 1.061, and consequently in 100 measures contained nearly 6.7 grains of chromic acid and potash, &c.—The liquid was a beautiful yellow; it was alkaline by the colour test. By the usual tests, I had reason to believe, that the solution contained as under per cent.—namely,

2.2

gr.

chromic acid

2.

potash

.8

uncomb. potash

1.4

carb. potash

.3

sulphate of potash

6.7

With this liquid neutralized by nitric acid, I formed the chromates of lead, barytes, iron, and mercury; and I am inclined to believe these salts are nearly constituted as under:

Neutral

chromate

of potash

46

acid

+

42

potash

—

—

of barytes

46

—

+

68

barytes

—

—

of lead

46

—

+

97

oxide

—

—

of iron

46

—

+

32

oxide (black)

—

—

of mercury

46

—

+

174

oxide (black)

According to these results, the atom of chromic acid weighs 46; it is made 44 by the results of Berzelius, and from 45 to 62 by those of Vauquelin; I would not be understood to place great confidence in the above results of mine, though I am persuaded they will be found good approximations.

Is the chromic acid the deutoxide, or the tritoxide of chromium?

The determination will evidently be affected by the question, how much oxygen must be abstracted from the chromic acid to reduce it to the green oxide. Vauquelin finds 46 acid to lose 6½ oxygen, and Berzelius 10½, when converted into green oxide by heat. From the former of these, one would infer chrome to be 32, the green or protoxide of chrome to be 39, and the acid or deutoxide 46: from the latter, chrome = 25, protoxide = 32 (unknown), the green oxide = 1 protoxide and 1 deutoxide united [= 71 = 50 chrome + 21 oxygen = (25 chrome + 10½ oxygen) × 2 = 35½ × 2] the deutoxide = 39, and the tritoxide or chromic acid = 46. I have not had an opportunity to perform any experiment that appears to me decisive as to the accuracy of one or other of these views; but shall make a few remarks relative to them.

The green oxide being the most prominent compound next to the chromic acid, being commonly produced from it by any deoxidizing process, being the lowest oxide known, and combining with acids, is on these accounts entitled to the consideration of the protoxide; indeed there does not seem an instance where the protoxide of a metal is unknown, whilst the deutoxide and compound oxides are known. There is however, another oxide observed by Vauquelin and by Berzelius, which is obtained by heating the nitrate, or combination of nitric acid and the green oxide, to dryness and expelling the acid; this oxide is brown, and gives oxymuriatic acid when treated with muriatic acid; on this account it would seem to be intermediate between the green oxide and the chromic acid; it is probably a combination of the two, or the chromate of chromium. On the other view however, it must be considered as the deutoxide. What corroborates the notion of the green oxide being 39, is the fact which I have observed, of 46 parts of chromic acid combining with 64 of the green oxide of iron to form 110 of chromate of iron; in this combination the oxide of iron may be said to borrow 1 atom of oxygen from the chromic acid, and the compound may then be considered as the union of the green oxide of chrome, and the red oxide of iron. When this precipitate is subjected to the action of muriatic acid, a green solution is obtained containing the oxide of chrome, and red oxide of iron is precipitated, as Vauquelin has observed. To form the above chromate (or rather subchromate) of iron, let a given portion of neutral chromate of potash be treated with green sulphate of iron, and lime water be added, sufficient to saturate the sulphuric acid, a brown red precipitate is obtained; more sulphate and lime water must be gradually added to the clear liquid till the precipitate become green, when the proportions will be found as above stated. This artificial compound seems a subchromate; whereas the native compound seems to be a chromate. That there is some uncertainty in decomposing a chromate by heat with a view to obtain the green oxide, I have reason to suspect from having decomposed 5⅓ grains of chromate of mercury by a moderate red heat; this compound contained 1.1 chromic acid, and it yielded only .6 of green oxide, whereas it should have been .9 or .8 at least.

Upon the whole I think the evidence is in favour of the opinion that the atom of chrome is 32, the green or protoxide 39, and the deutoxide or chromic acid is 46.

24. Oxides of uranium.

There appear to be two oxides of uranium from the experiments of Klaproth, Bucholz, and Vauquelin; but the proportions of metal and oxygen have not been very nearly ascertained, from the great scarcity of the minerals containing this metal. (Vid. Bucholz, An. de Chimie, 56—142. Vauquelin, ibid. 68—277; or Nicholson’s Journ. 25—69). The oxides are obtained by precipitation from solutions of the minerals in the nitric or muriatic acid, the foreign substances being first separated.

The protoxide of uranium precipitates dark bottle green by caustic alkalies, and forms crystallizable salts with acids; the other, probably the deutoxide, precipitates orange yellow, and forms uncrystallizable salts with acids; in these respects the oxides bear a near resemblance to those of iron.

Bucholz estimates the yellow oxide at 100 metal + from 25 to 32 oxygen; as it yields oxymuriatic acid when treated with muriatic, it is most likely to be the deutoxide; now if we take 28 for the oxygen combined with 100 metal, the protoxide must consist of 100 metal + 14 oxygen, or of 50 metal + 7 oxygen, and the atom of uranium = 50. From his account of the sulphate and nitrate of uranium the weight of the atom might be inferred to be double of the above or 100. These different conclusions can only be elucidated by future experiments.

25. Oxides of molybdenum.

The latest and as it should seem most accurate experiments on the oxides of molybdenum were made by Bucholz. (Vid. Nicholson’s Journal, 20, p. 121). There appear to be 3 oxides or combinations of molybdenum and oxygen, namely, the brown, the blue, and the white or yellow. The two last have the character of acids, and none of them seem to form salts with acids, like oxides in general. Bucholz ascertained the above gradation, and that the white oxide or molybdic acid contains ⅓ of its weight of oxygen; (which has since been corroborated by Berzelius); he also found that the blue was best formed by mixing, triturating, and boiling in water 3 parts of brown oxide, and 4 of white, or one of metal, and two of acid; and that it has acid qualities as well as the white. Bucholz also found 3 parts of liquid ammonia of the sp. gr. .97 dissolve 1 of molybdic acid; now 3 parts of ammonia = .186 real (VOL. 1, p. 422); and 1 ∶ .186 ∷ 64 ∶ 12, the quantity of ammonia usually saturated by one atom of acid; and Berzelius found 100 molybdic acid saturate 155 oxide of lead, or 63 acid to 97 oxide. The native sulphuret of molybdenum (the state in which this metal is usually found) was analyzed by Bucholz and found to consist of 60 metal and 40 sulphur.

The molybdic acid may be obtained by roasting the sulphuret in a crucible and stirring it frequently; the sulphur in great part escapes in the form of sulphurous acid and the metal becomes oxidated: carbonate of soda in solution may be added to the residuum as long as any effervescence is observed; molybdate of soda remains in solution and the acid may be precipitated by nitric acid. The brown oxide is best obtained by heating molybdate of ammonia to red; the ammonia and part of the oxygen are expelled, and the brown oxide remains.

There are two views with which the preceding results may be reconciled; namely, 1st. supposing the atom of molybdenum to weigh 21; and 2d, by supposing it to weigh 42 or twice that number. In the first case the brown oxide will weigh 24½ (49) being supposed 2 atoms of metal and 1 of oxygen, the blue or protoxide will weigh 28, and the white oxide or molybdic acid will weigh 63, being a compound of the protoxide and deutoxide, molybdena or native sulphuret will then be as usual, the protosulphuret, consisting of 21 metal and 14 sulphur, or 60 metal and 40 sulphur. In the 2d. case the brown or protoxide will weigh 49, the blue or deutoxide 56, and the acid or tritoxide 63. The native sulphuret, molybdena, must in this view be the deutosulphuret, or 42 metal and 28 sulphur.

The former of these views exhibits the oxides somewhat complicated, but agrees well with the sulphuret; the latter shews the oxides in a more regular train, but does not appear so probable from the sulphuret; besides, the notion of a metallic tritoxide is rather singular, especially in a metal that is rarely if ever found in combination with oxygen. Upon the whole I prefer the former view; but it must be considered as problematical only. The atom of 60 (see page 267 VOL. 1) must doubtless be erroneous.

26. Oxides of tungsten.

From the experiments of D’Elhuiarts, Bucholz[13] and Berzelius[14] it seems very probable that the tungstic acid is composed of about 100 metal + 25 oxygen. It is a yellow powder of the sp. gr. 6.12, and is best obtained from the native tungstate of lime (a scarce mineral). One part tungstate of lime and four of carbonate of potash are fused together, dissolved in water, and then the tungstic acid may be precipitated by nitric acid. There is an inferior oxide that is black or dark brown; Berzelius reduced the yellow oxide to a flea-brown colour, by sending a current of hydrogen gas through it in a glass tube heated red hot. 100 parts of this oxide burnt be 107 yellow oxide. Hence 100 metal must combine with about 16½ or 17 oxygen to form this oxide, which is ⅔ of that in the yellow or tungstic acid.—Upon the whole it does not seem improbable, considering the great sp. gravity of this metal, that it forms three oxides and that the acid or yellow oxide is the 3d. Hence the atom of tungsten must be 84, that of the protoxide 91, the deutoxide 98, and the tritoxide or tungstic acid 105. The native tungstate of lime, if pure, according to this would be 81.4 acid + 18.6 lime, which is not far from Klaproth’s analysis; he having found 18.7 lime in one specimen; nor from that of Berzelius, he having found 80.4 tungstic acid and 19.4 lime in 99.8 tungstate of lime.[15]

There is another view however, which would accord with the experiments and perhaps will be found preferable in other respects; that is, to suppose the tungstic acid to be composed of 1 atom deutoxide and 1 atom protoxide united; in this case the atom of tungsten = 42, that of the protoxide = 49, that of the deutoxide = 56, and the tungstic acid = 105 as before.

27. Oxides of titanium.

Nothing certain is known respecting the oxides of titanium. An observation of Richter, quoted by Berzelius (An. of Philos. 3—251), if it could be relied upon, furnishes an important fact, namely, that a solution of muriate of titanium containing 84.4 oxide, gave 150 muriate of silver. Now 150 muriate of silver contain 28 acid; hence 28 acid must have combined with 84.4 oxide; but if 28 ∶ 84.4 ∷ 22 ∶ 66 nearly for the weight of an atom of the oxide. This would indicate 59 for an atom of the metal.

28. Oxides of columbium.

The white oxide or acid of columbium is found in combination with the oxides of iron and manganese in proportion nearly as 4 of the acid to 1 of the aggregate oxides. The two minerals, columbite and tantalite, though yielding these substances nearly in the same proportions, are found to differ remarkably in specific gravity, the former being about 5.9 and the latter about 7.9. Dr. Wollaston concludes however, from the agreement of the white oxides extracted, that they must be the same. The white oxide of columbium is insoluble in the mineral acids; it unites with potash by fusion, and may be precipitated by most acids. Some of the vegetable acids, the oxalic, the tartaric, and the citric dissolve the white oxide. When the alkaline solution of columbium previously neutralized by an acid is treated with infusion of galls, an orange precipitate is produced which is characteristic of columbium. Nothing certain has been determined respecting the proportions of metal and oxygen; but from the great proportion of the columbic acid found with the oxides of iron and manganese, together with the great sp. gravity of the compound, one may pretty clearly infer the great weight of the atom of columbium. Supposing the white oxide or acid to consist of 1 atom metal + 3 oxygen and that the columbite is formed by 1 atom of acid to 1 of oxide, we should have 128 acid + 32 oxide. This would give 107 for the weight of an atom of metal, and 128 for that of the tritoxide or columbic acid; but it is unnecessary to dwell upon such conjectures.

In a recent memoir of Messrs. Gahn, Berzelius, and Eggertz (An. de Chimie, Octo. 1816), it is maintained as probable that there is only one oxide of columbium or tantalum, and that 100 metal take 5.485 oxygen, or 121 metal take 7 oxygen. If this be correct, the atom of columbium must be 121 and the protoxide 128.

(See also An. de Chimie, 43—271; Philos. Trans. 1802; Nichols. Journ. 2—129; ibid. 3—251; ibid. 25—23).

29. Oxides of cerium.

The mineral cerite is of the sp. gr. 4.53, and constituted of 50 or 60 per cent. of oxide of cerium, with silex, lime, and iron. This mineral being calcined and dissolved in nitro-muriatic acid, the solution is to be neutralized by caustic potash, and then treated with tartrate of potash. The precipitate, well washed and afterwards calcined, is pure oxide of cerium. This oxide, which is white, when calcined in the open air becomes red and acquires more oxygen. These oxides, particularly the white, are soluble in most acids; the red oxide with muriatic acid gives oxymuriatic acid.

The experiments hitherto made on this subject scarcely enable us to decide respecting the proportions of metal and oxygen, nor the relative weights of these oxides.

Both Vauquelin[16] and Hisinger[17] agree that the protocarbonate of cerium, when exposed to a red heat, yields 57 or 58 oxide, which the former says is the red oxide, being changed by the calcination. Hisinger finds the percarbonate to consist of 36.2 acid and 63.8 oxide: also that the muriate of cerium consists of 100 acid and 197.5 oxide; but Vauquelin remarks that the sulphate, nitrate, and muriate of cerium are always more or less acid, however dried; and he found the protoxalate of cerium to yield 45.6 red oxide by calcination, on a mean of 3 experiments not much differing from each other. Supposing all these facts accurate, they may be reconciled by a few suppositions by no means improbable. Let the atom of cerium be 22, the protoxide 29, and the red oxide 32½ (that is, 1 oxy. + 2 protox. = 65); and let the protocarbonate be 1 atom of acid, 1 of oxide, and 1 of water; the percarbonate, 1 acid 1 oxide; the oxalate, 1 acid (40) and 1 oxide; and the muriate, saturated with base, 3 oxide and 2 acid. Then it will be found that,

- The decomposed protocarbonate will yield 57.5 red oxide;

- The decomposed percarbonate will yield, 36.7 acid, 63.3 oxide;

- The decomposed oxalate will yield 47 red oxide; and

- The muriate will yield 100 acid (22), and 197.7 oxide.

All of which agree very nearly with the results above obtained.

Hence it appears to me very probable that the several atoms of the metal and the oxides are as stated above; and that,

100 cerium

+

31.8

oxygen

=

131.8 protoxide, white.

———

+

47.7

——

=

147.7 intermediate, red.

Hisinsger, from some of the same data united to other hypothetical facts than those assumed above, deduces the two oxides very different; viz. 100 metal + 17.4 oxygen for the protoxide, and 100 + 26.1 for the peroxide.

SECTION 14.

EARTHY, ALKALINE AND METALLIC

SULPHURETS.

The sulphurets exhibit a very important class of combinations of two elements. Many of the metals are found chiefly in the state of native sulphurets, and are extracted by particular processes. Artificial combinations of sulphur and the metals, and of sulphur and the earths and alkalies are commonly practised, and are found useful in chemical investigations. The alkaline and earthy sulphurets will scarcely be allowed perhaps to be combinations of two elements only; but their analogy with the other compounds is such as to induce us to treat of them under this head, especially as they are agents occasionally in the formation of metallic sulphurets, and these cannot be so well understood without some knowledge of the other. For like reasons the compounds of three elements, sulphur, metal, and oxygen, called sulphuretted oxides, and sulphuretted sulphites, and those of four elements, sulphur, metal, oxygen and hydrogen, called hydrosulphurets, may be considered at the same time, having an intimate relation with the sulphurets strictly so called, or the compounds formed with sulphur and the undecompounded bodies.

Sulphur may be combined with the earths, alkalies and metals, by heat, of various degrees according to the nature of the subjects. The union is attended in many cases with a glowing ignition, indicating the evolution of heat. The metallic oxides and sulphur when heated together commonly produce a sulphuret of the metal, whilst the oxygen escapes with part of the redundant sulphur in the form of sulphurous acid, and the rest of the sulphur sublimes.

In the humid way sulphur may be combined with earths, alkalies, and metals, by means of sulphuretted hydrogen, hydrosulphurets (that is, sulphuretted hydrogen united to other alkaline or earthy bases), and hydroguretted sulphurets (a name given to certain earthy and alkaline sulphurets formed mostly by boiling mixtures of the respective bases and sulphur in water.) The sulphuretted hydrogen may be used in this state of gas or combined with water; the hydrosulphurets and hydroguretted sulphurets are best applied in their watery solutions. The metals are to be used in this case in the state of salts, that is, oxides united to acids, and in solution; or their oxides may in some instances be precipitated previously to the addition of the sulphur compound; the alkalies and earths are sometimes directly sulphurized in the state of hydrates, and at other times by double affinity, in the state of salts or combined with acids. The phenomena in the case of sulphurets formed in the humid way, are various and often complicated, and the true results are not always to be obtained without considerable difficulty and uncertainty.

1. Sulphurets of lime.

When pounded lime and sulphur are mixed together, and heated in a crucible scarcely any union takes place; the sulphur sublimes or burns away and leaves the lime unaltered. If for lime we substitute carbonate of lime, it also remains unaltered. But if hydrate of lime and sulphur are heated together in equal weights, the hydrate is decomposed, and the lime unites to a portion of the sulphur, whilst the excess of sulphur sublimes or burns and escapes at a low red heat. The residue, about 60 per cent. of the original weight, is a yellowish white powder, composed of sulphur and lime. If this be again treated with sulphur and heated, it undergoes no material change; the last sulphur entirely escaping, leaves the sulphuret unaltered, and hence shews that it must be a true chemical compound.

Now if 32 parts hydrate of lime, which consist of 24 lime and 8 water, be mixed with 32 sulphur and heated as above, they will yield 38 parts sulphuret, which must be composed of 24 lime and 14 sulphur, or sulphur and water; but it appears from the analysis hereafter to be given, that the whole of this last part is sulphur; therefore the compound is formed of 1 atom of lime, and 1 of sulphur, and is the protosulphuret of lime.

When 32 parts of common hydrate of lime and 56 sulphur, are boiled together in 1000 parts water for half an hour, or more, occasionally adding water to supply the waste, a fine yellow liquid is obtained, with a few grains of residuum containing both lime and sulphur nearly in the original proportion with a few grains of alumine. This liquid of course contains in solution, a combination of 1 atom of lime, or perhaps hydrate of lime, and 4 atoms of sulphur; and may therefore be called a quadrisulphuret of lime. If more sulphur or lime than the above proportion be used, the surplus will remain in the residuum uncombined, shewing that by this process no other than a quadrisulphuret can be formed. A similar solution may be obtained in cold water by frequent agitation; but it is much slower in producing the effect. The strength of liquid quadrisulphuret depends upon the relative quantity of the ingredients. I have boiled it down till the water was only 5 times the other materials, which appears to be its maximum strength in the common temperature; its specific gravity was 1.146; but in general I have used it of less than 1.07 density. It may be proper to remark here that I find the decimals multiplied by 4 express very nearly the number of grains of lime in 1000 grains measures of the solution, and multiplied by 9 those of the sulphur; on this account a solution of the sp. gravity 1.06 facilitates the calculations, as 100 measures of it contain 2.4 grains of lime, and 5.4 or 5.6 of sulphur nearly.

It is rather surprising that no bisulphuret nor trisulphuret of lime should be formed this way. One would suppose that the sulphuret of lime in its progressive changes would have passed through the forms of bisulphuret, &c. till it had obtained its maximum of sulphur when that was in excess; but, as has been observed, the quadrisulphuret is the only one formed, whatever may be the proportions of the ingredients. I imagine the reason to be, that the sulphur has to decompose the hydrate of lime, and that no fewer than 4 atoms of sulphur are adequate to that effect; it is known that water adheres so strongly to lime as to require a red heat to separate it. When therefore we mix lime water with quadrisulphuret of lime, it must be considered as a mere mixture of the two, and that the lime does not divide the sulphur equally. Consistently with this reasoning, whenever the lime is in excess in forming quadrisulphuret of lime, we ought to consider the liquid solution as lime water holding quadrisulphuret of lime. This distinction will be of some importance when the solution is weak, because then the lime in the lime water will be considerable, compared with the lime combined with sulphur.

1. Protosulphuret. The properties of this compound are;—about 1 grain is soluble in 1000 water; this water, as well as the powder itself, tastes like the white of an egg; salts of lead are thrown down black by the solution; weak nitric and muriatic acids dissolve the lime, and leave the sulphur; 100 parts of test acid require 19 of the powder, and yield 7 of sulphur; indicating the compound to be 12 lime and 7 sulphur. The same conclusion may be obtained by means of a solution of lead; if water containing 1.9 grains of the powder be precipitated by nitrate of lead, it will require 7 grains of the salt = 2.2 acid and 4.8 oxide, or 4.5 lead, and about 5 or 5½ grains of sulphuret of lead will be formed, and the liquid will contain 3.4 grains of neutral nitrate of lime.

2. Quadrisulphuret. This combination has been long known, and some of its properties observed; but I have not found in authors any determination of its proportions. It is of a beautiful yellow or orange colour, and 1 grain imparts very sensible colour to 1000 of water; it has a disagreeable bitter taste; when evaporated down, it crystallizes or rather perhaps solidifies into a yellowish mass; but its properties are affected by the process from the acquisition of oxygen. This mass when dried, burns with a blue flame and loses 40 per cent.; the remainder is a white powder, a mixture of sulphite and protosulphuret of lime. Liquid quadrisulphuret exposed to the atmosphere soon becomes covered with a white film which arises from the sulphur displaced by oxygen gas; this film being broken subsides, and another is formed, and so on successively till at length the acquisition of oxygen ceases with the deposition of sulphur, and the liquid remains quite colourless. It is intensely bitter, and contains lime, sulphur and oxygen in proportions to be presently determined. This colourless liquor undergoes a gradual change by being kept for years in a bottle with a common cork; a deposition of some sulphur and sulphate of lime takes place, but whether from a further acquisition of oxygen gas or from some internal chemical action, I have not had an opportunity of observing.

From the above observations it is obvious that to form pure quadrisulphuret of lime the atmospheric air should be excluded, as the agitation by ebullition would promote the oxidizement of the compound. I mixed 168 grains of sublimed sulphur with 96 hydrate of lime, which by previous trials I had found to consist of 70 lime including 2 or 3 grains of alumine, and 26 water; the mixture was put into a small florence flask, which was then filled with water up to the neck and loosely corked. This was immersed in a pan of water and boiled for 2 or 3 hours, the flask was continually turned round to agitate the mixture and promote the solution. After the undissolved part had subsided the clear liquor was decanted and found to be 2800 grain measures of the sp. gr. 1.056; the residuum moderately dried weighed 34 grains; it was found to contain 8 of lime and alumine, and 25 of sulphur. Hence the liquid contained 62 lime and 143 sulphur, or 2.2 lime and 5.1 sulphur per cent.; that is, after the rate of 24 lime to 56 sulphur, or 1 atom of lime to 4 of sulphur, and its weight = 80, the atom of sulphur being supposed 14. Here then we have a synthetic proof of the composition being a quadrisulphuret. Innumerable other experiments, though made with less rigid accuracy, had convinced me that the liquid is essentially the same whatever the proportions of the ingredients, and that the residuum only varies in such cases.

I have made many experiments occasionally since 1805, on the quantities of oxygen absorbed and sulphur deposited by quadrisulphuret of lime. They all concur in establishing the same conclusion; namely, that each atom of the compound takes 2 of oxygen and deposits 2 of sulphur, in its transformation from the yellow to the colourless state. For instance, 100 measures of the above 1.056 took 900 of oxygen gas = 1.22 grains, and let fall 2 grains of sulphur, besides a small portion which adhered to the bottle, which was estimated at a few tenths of a grain. The method is to put 100 measures into a graduated and well stoppered bottle filled with oxygen; to agitate briskly for half an hour, occasionally opening the stopper a little under water to admit its entrance into the place of the oxygen absorbed. Whenever the agitation has been continued for five minutes without any sensible increase in absorption, and the liquor, after standing to let the sulphur subside, appears colourless, the experiment is finished. This new combination then consists of 1 atom lime, 2 sulphur, and 2 oxygen = 66; it will be necessary to give it a name: I propose calling it sulphuretted sulphite of lime, as it is an atom of sulphur united to sulphite of lime; and the rather, as it will appear in the sequel that other neutral salts do combine occasionally with an atom of sulphur. This sulphuretted sulphite may be boiled down to the sp. gr. 1.1 before it precipitates: the liquid then contains about 12 per cent. of the salt, or 5 sulphur, 2½ oxygen, and 4½ lime. The salt precipitates from the liquid by evaporation in the form of a white powder; it burns with a feeble blue flame, and loses about 20 per cent.; the remainder is sulphite of lime. When 100 grain measures of the liquid sulphuretted sulphite (1.1) are saturated with oxymuriate of lime, they acquire 5 grains of oxygen, and then yield 12½ grains of sulphuric acid (containing 5 sulphur and 7½ oxygen), as may be found by the barytic tests. The point of saturation is known by the smell of oxymuriatic acid being given out permanently.

If however we oxidize the quadrisulphuret of lime by oxymuriate of lime, the results are somewhat different. As soon as an atom of the quadrisulphuret has received two atoms of oxygen it becomes colourless as before, but ¾ of the sulphur is thrown down instead of ½; and when more oxymuriate is added, so as to impart 3 atoms of oxygen to one of the salt, a complete sulphate of lime is formed. The point of saturation is determined by adding a small portion of muriatic acid to the liquid, which develops the oxymuriatic acid as soon as it becomes in excess. This method excels in the analysis of the alkaline and earthy sulphurets in general.

When quadrisulphuret of lime is treated with an alkaline carbonate, a reciprocal change takes place; the carbonic acid takes the lime, and the alkali the sulphur, leaving however 1 atom of sulphur with the carbonate which precipitates. Hence a sulphuretted carbonate of lime is obtained and a trisulphuret of the alkali. The sulphur burns off from the carbonate below a red heat and leaves 75 per cent. of carbonate of lime; this affords an excellent analysis of quadrisulphuret of lime as far as lime is the object. Thus 540 of the above 1.056 quadrisulphuret took 100 test carbonate of potash (1.25), and gave a precipitate of 29 grains, which burned blue and left 22 grains = 12 lime, and 10 acid; but if 540 ∶ 12 ∷ 100 ∶ 2.2, as above determined synthetically: moreover, 12 lime, 10 acid, and 7 sulphur, are as 24 lime, 20 acid, and 14 sulphur; the composition of an atom of sulphuretted carbonate of lime, which is analogous to the sulphuretted sulphite of lime, as found above.

When quadrisulphuret of lime is treated with as much sulphuric acid as is sufficient for the lime, the sulphur is in part precipitated, but it is in union with the sulphate of lime, or at least they are not separable by mechanical means. This compound is sold in the shops under the name of precipitated sulphur. It is about one half sulphate of lime, and the other half sulphur. The nitric and muriatic acids precipitate the sulphur partially from quadrisulphuret, but the sulphur assumes a viscid form and exhales sulphuretted hydrogen, and the proportion of the elements of quadrisulphuret are not easily obtained by any of these acids.

The mutual action of quadrisulphuret of lime, and the metallic salts is curious and interesting; for instance, with nitrate of lead. Let a solution of nitrate of lead, containing 97 oxide, be treated with a solution of quadrisulphuret of lime by degrees, as long as a black precipitate appears, marking the exact point of saturation; this will be found when 36 parts of lime have entered, and 84 of sulphur; the sulphuret of lead will fall, and when dried will weigh 145 parts, and contain 90 lead, and 55 sulphur; that is, 1 atom of lead, and 4 of sulphur, and is consequently a quadrisulphuret of lead. The liquid remains clear and colourless, and contains the nitric acid, lime, oxygen of the lead, and ⅓ of the sulphur; each atom of nitric acid combines with one of lime, which retains one of the 4 atoms of sulphur, forming a sulphuretted nitrate of lime, consisting of 45 acid, 24 lime, and 14 sulphur; the 7 parts of oxygen unite with 7 of sulphur to form sulphurous acid, which require 12 parts of lime to saturate them and 7 of sulphur, forming a sulphuretted sulphite of lime: hence we see that 28 parts of sulphur remain in the liquor, and the rest (56) unite with the lead. If now we add gradually more nitrate of lead, a silvery white precipitate appears, increasing till half the original quantity is added, and then the liquid is saturated. This white precipitate is sulphuretted sulphite of lead; when heated it soon grows black and loses 15 or 20 per cent., being then a protosulphuret of lead. The liquid now contains sulphuretted nitrate and simple nitrate of lime; nitrate of lead has no effect, but nitrate of mercury precipitates a black sulphuret.

Quadrisulphuret of lime saturated with oxygen, as has been observed, contains sulphuretted sulphite of lime in solution, and deposits sulphur: the liquid treated with nitrate of lead, gives as above the white, silvery sulphuretted sulphite of lead as a precipitate, and holds nitrate of lime in solution.

Hydrosulphuret of lime. This compound may be formed by passing sulphuretted hydrogen into lime water; the water assumes a brownish colour, but the point of saturation is not easily found, as the lime water is not neutralized so as to shew by the colour test, and water of itself absorbs above twice its volume of the gas. By means of a neutral solution of nitrate of lead it may be found that 1000 lime water in volume, require about 600 sulphuretted hydrogen, because then a mutual saturation is observed by double affinity; that is, sulphuret of lead and neutral nitrate of lime are formed; but otherwise the liquid remaining is either acid or alkaline. Hydrosulphuret of lime, as well as the other hydrosulphurets, has a peculiar bitter taste. It forms a useful reagent in regard to metals, but is apt to be spoiled by keeping, owing to the acquisition of oxygen.

2. Sulphuret of magnesia.

I have not succeeded in endeavouring to combine sulphur and magnesia in the dry way; but a liquid sulphuret is easily formed by the action of double affinity.

Let a quantity of the liquid quadrisulphuret of lime be treated with a solution of sulphate of magnesia, so that the sulphuric acid may be sufficient for the lime; by digesting in a moderate heat, the sulphate of lime is precipitated, carrying with it one fourth of the sulphur, and a trisulphuret of magnesia remains in solution. I have not observed any remarkable feature of distinction between this sulphuret and that of lime, except as above noticed in the proportions of their compounds.

Hydrosulphuret of magnesia. This compound may be formed by pouring sulphuretted hydrogen water into recently precipitated magnesia; it does not differ much from that of lime. One atom of sulphuretted hydrogen (15), combines with one of magnesia (17), and the compound is soluble in water.

3. Sulphuret of barytes.

Protosulphuret. The protosulphuret of barytes may be procured the same way as that of lime, by heating hydrate of barytes and sulphur till the mixture becomes red. It is very little soluble in water, and accords in other respects with the like compound of lime. It consists of 68 barytes and 14 sulphur, or 100 barytes and 20½ sulphur.

Quadrisulphuret. The quadrisulphuret of barytes may be formed the same way as quadrisulphuret of lime, by boiling the hydrate of barytes and sulphur together. A yellow solution of the compound is formed, not distinguishable in appearance from that of lime; and it appears to be analogous to it in most of its properties. By acquiring oxygen it becomes colourless sulphuretted sulphite of barytes, and crystalizes in needles; in this last respect it differs from that of lime. The maximum density of liquid quadrisulphuret I have not had an opportunity of ascertaining; it is 1.07 or upwards; that of the liquid sulphuretted sulphite is much less than that of lime; the crystals are found in a liquid so low as 1.004 sp. gr. They have a fine silky lustre when dry, and a yellowish colour; heated they burn with a blue flame and leave a white mass of sulphate preserving the same crystalline appearance as before, and lose about 20 per cent. of weight. Ten grains of the crystals of sulphuretted sulphite, when treated with liquid oxymuriate of lime to saturation, require 2+ grains of oxygen and yield 8 grains of sulphate of barytes, together with an excess of sulphuric acid which with muriate of barytes gives 8 grains more of sulphate. From these facts it may be concluded that the sulphuretted sulphite consists of one atom barytes, 2 sulphur, 2 oxygen, and 2 water, and that 4 more of oxygen are derived from the oxymuriatic acid to convert the sulphurous oxide into sulphuric acid. The sulphuretted sulphite of barytes seems to pass into sulphate by length of time. The weight of the atom of quadrisulphuret of barytes is 124; the compound in mass consists of 100 barytes and 82 sulphur.

Hydrosulphuret of barytes. This compound may be formed in the same manner as that of lime, and is found to have similar properties. The proportions for mutual saturation are, I find, as in the case of lime, 15 sulphuretted hydrogen to 68 barytes by weight, or one atom of each.

4. Sulphurets of strontites.

The protosulphuret and quadrisulphuret of strontites may be formed in the same way as those of lime and barytes. From a few experiments made on these compounds I have not observed any remarkable feature of distinction between them and the corresponding ones of the other earths.

Hydrosulphuret of strontites. This compound may be formed in the same way as that of lime; the proportions to produce mutual saturation will be 1 atom of each, or 15 parts sulphuretted hydrogen, to 46 strontites by weight.

5, 6, 7, 8, and 9. Sulphurets of alumine, silex,

yttria, glucine, and zircone.

I made several unsuccessful attempts to combine alumine and sulphur. When alumine and sulphur mixed together are heated, the sulphur sublimes chiefly, and leaves the alumine with traces of sulphate of alumine.

In the humid way, recently precipitated and moist alumine mixed with sulphur and boiled in water, give a liquid with some traces of sulphuric acid, but no sulphuret of alumine; the sulphur and alumine both subside, and when the sulphur is either sublimed or burnt, the alumine remains much the same as at first. When a solution of alum is treated with sulphuret of lime, sulphate of lime is precipitated along with the greatest part of the sulphur in a kind of feeble union rather than mechanical mixture, it should seem; the alumine is at the same time precipitated probably in mechanical mixture; there remain in solution a little sulphuret of potash and sulphate of lime.

Sulphuret of silex is not known, I apprehend, to exist. When silicated potash in solution is treated with quadrisulphuret of lime, a copious dark brown or black precipitate instantly appears; the liquid when filtered is of a pale yellow colour, and seems to contain about one half of the sulphur and potash, whilst the other half is thrown down in union with the lime and silex. This black compound is probably 1 atom of lime, 2 of sulphur, 2 of potash, and 2 of silex; it cannot therefore be accounted a sulphuret of silex.

Sulphurets of yttria, glucine, and zircone, are as yet, I presume, unknown.

10. Sulphurets of potash.

Potash has a strong affinity for sulphur and unites with it in various ways and proportions.

1st. In the dry way by heat. When either pure potash or the carbonate (salt of tartar) is heated in a covered crucible with sulphur, a chemical union of the two principles takes place. Eight parts of dried hydrate of potash unite to six or seven of sulphur: a heat of 4 or 500° of Fahrenheit is convenient for the purpose. If the carbonate of potash be used, then 12 parts dried in a low red heat will require 8 of sulphur for their complete saturation: in this case a higher degree of heat is requisite in order to expel the carbonic acid; a low red heat seems sufficient from my trials. When the heat does not exceed 3 or 400° a partial union takes place; the carbonate of potash, without losing any acid, unites to ⅓ of the sulphur, and the rest of the sulphur remains uncombined; when intermediate degrees of heat are used, I have found the result a mixture of the pure sulphuret and the carbonated sulphuret, with more or less of sulphate of potash. A high degree of heat and exposure to the atmosphere produces a sulphate instead of a sulphuret. The sulphurets obtained this way are in fusion till poured out and cooled; they are of a liver colour, and hence were formerly called livers of sulphur. They are largely soluble in water, and give a brownish yellow solution.

2d. In the humid way by solution. Pure caustic potash in solution when boiled with sulphur dissolves it largely, 42 parts of real potash being saturated with about 56 of sulphur. If we boil a solution of carbonate of potash with sulphur, for an hour or more, a brown liquor is obtained, which consists of 60 parts carbonate of potash and 14 sulphur in chemical union.—It has already been observed that a trisulphuret of potash may be obtained by double affinity from quadrisulphuret of lime and carbonate of potash, together with sulphuretted carbonate of lime.

From what has been stated we may infer at least three varieties in the compounds of sulphur and potash, viz.

1st. Sulphuretted carbonate of potash. This consists of 1 atom carbonate of potash (61) with 1 atom of sulphur (14). Its analysis may be effected as follows: the quantity of carbonic acid may be found by the lime water necessary to saturate it; the potash may be known from the quantity previously entering into the mixture; and the sulphur in the same manner, or from the quantity of sulphuretted carbonate of lead that it forms.—The sulphur may also be known, from the quantity of oxygen it requires by means of oxymuriate of lime to produce saturation; this I find to take place when the oxygen is half the weight of the sulphur, or one atom to one of sulphur; it soon happens, that one atom of sulphur deprives two others of their oxygen, and sulphuric acid is formed whilst the other two atoms of sulphur join the carbonate of lime and are precipitated along with it. As it may frequently happen, that the sulphuretted carbonate is mixed with common carbonate of potash, the proportions may be found by means of nitrate of lead, which being cautiously dropped into the solution, lets fall first the brown sulphuretted carbonate of lead, and then the common white carbonate of lead.

The sulphuretted carbonate of potash absorbs oxygen and precipitates metals much the same in appearance as the other sulphurets; but essential distinctions are observable, some of which are noticed above, and others will appear in the sequel.

2 and 3. The trisulphuret and quadrisulphuret of potash so nearly resemble the quadrisulphuret of lime in their properties, as not to require any additional remarks.

Hydrosulphuret of potash. This combination, when duly proportioned, consists of 15 parts sulphuretted hydrogen, and 42 potash by weight, or one atom of each. It may be formed by directly uniting the two elements, or by decomposing hydrosulphuret of lime by carbonate of potash. Its properties agree with those of the other hydrosulphurets.

11. Sulphurets of soda.

I have repeated most of the experiments on the sulphurization of potash with soda, and have not found anyone remarkable feature of distinction, besides those which arise from the weights of the atoms.

1. Sulphuretted carbonate of soda consists of 1 atom of carbonate of soda united to 1 of sulphur; or of 47 parts of the former and 14 of the latter.

2. Trisulphuret of soda consists of 1 atom soda (28) and 3 of sulphur (42).

3. Quadrisulphuret of soda consists of 1 atom soda (28) and 4 atoms of sulphur (56).

Hydrosulphuret of soda. This compound consists of one atom of each of the elements, or 15 sulphuretted hydrogen, and 28 soda. In other respects it agrees with hydrosulphuret of potash.

12. Sulphuret of ammonia.

The best way which I have found of procuring sulphuret of ammonia, is to treat quadrisulphuret of lime with the carbonate of ammonia as long as any precipitate takes place; the precipitate is sulphuretted carbonate of lime, 3 atoms of sulphur to 1 of carbonate of lime. The liquid is of a pale yellow, and contains ammonia and sulphur united in the ratio of 1 atom (of 6) to 1 of sulphur: it may therefore be denominated the protosulphuret of ammonia.

The carbonate of ammonia is best procured by heating the common subcarbonate of ammonia, first pulverized, in a temperature of 100° for half an hour, or exposing it for a few days to the atmosphere. What remains of the salt is almost without smell; it should consist of 19 parts acid, 6 ammonia, and 8 water nearly: the ammonia is usually however a small degree in excess.

Hydrosulphuret of ammonia. This compound may be formed in the dry state by combining the two gases of sulphuretted hydrogen and ammonia over mercury; it is of a white crystalline appearance, and very soluble in water, and forms a fuming liquor of a very pungent smell. It may also be obtained by passing sulphuretted hydrogen into a vessel containing liquid ammonia. I find about 110 or 120 measures of sulphuretted hydrogen require 100 of ammoniacal gas. Hence it is 1 atom of sulphuretted hydrogen (15), that unites to 1 of ammonia (6).

13. Sulphurets of gold.

There exist at least two sulphurets of gold, the nature and proportions of which are easily ascertained; though several authors assert that no combinations of gold and sulphur are known; amongst these it is surprizing to find Proust: indeed most of the others have probably been led by his authority to adopt the opinion without examination. It is not very easy to account for his deception.

Obercampf, in the Annal. de Chimie, tom. 80. 1811, is the first author I have seen who distinctly maintains the existence of one or more sulphurets of gold, though it seems to have been admitted previously by Bucholz. The last author finds 82 gold unite to 18 sulphur, and the former 80 to 20 nearly.

Protosulphuret of gold. This compound is formed whenever a solution of muriate of gold is agitated with sulphuretted hydrogen gas, or with the same united to a base, as lime or alkali. A black or deep brown powder falls down by the addition of more gas, till the whole of the gold is precipitated. The oxide of gold loses one atom of oxygen, and receives one of sulphur in its place, whilst the hydrogen of the gas is carried off along with the oxygen of the oxide. The sulphuret dried and heated, burns with a blue flame, leaving the gold nearly pure. This compound consists, I find, of 81 gold and 19 sulphur per cent.; or 100 gold unite to 23 sulphur.

Trisulphuret of gold. This compound is obtained whenever quadrisulphuret of lime is gradually dropped into a solution of muriate of gold; it is a black powder, not quite so deep as the former. Care must be taken to saturate the excess of acid previously by lime water, to prevent any uncombined sulphur precipitating. Trisulphuret of gold being heated, burns with a blue flame, and leaves the gold nearly pure; it loses from 10 to 45 per cent. by the process. It is constituted of 1 atom gold and 3 sulphur, or 60 gold and 42 sulphur, nearly; or 100 gold combine with 70 sulphur.

From several experiments I am led to conclude that each atom of oxide of gold takes 3 of sulphur, and parts with 1 of oxygen to the remaining sulphur; thus a trisulphuret of gold is formed, and an oxide of sulphur; the liquid, being afterwards treated with oxymuriate of lime, is found to require twice the oxygen of the gold for its saturation, when a corresponding portion of sulphuric acid may be precipitated by muriate of barytes.

14. Sulphuret of platina.

Sulphur may be combined with platina in several ways, and probably in different proportions; but the combination is not so easily and elegantly effected as with many other metals, and hence some uncertainty still remains on the subject.

When a salt of platina is treated with sulphuret or hydrosulphuret of lime, or sulphuretted hydrogen water, the liquid slowly and gradually grows dark brown and finally black; after agitation and standing a few hours, the liquid is semitransparent, and a black flocculent precipitate appears at the bottom. Sometimes after violent agitation, the liquid on standing a few minutes becomes a transparent brown, but soon grows turbid again. In the course of a few days, and by occasional agitation, the liquid finally becomes clear and nearly free from platina, and the precipitate may be collected on a filter and dried. This circumstance of slow and indolent precipitation cannot be prevented by any means I have found, such as saturating the excess of acid, &c.

Mr. Edmund Davy, in the 40th VOL. of the Philos. Magazine, has given us the results of his experiments and observations on the sulphurets of platina, containing some useful and original information. He combines platina with sulphur by heating the ammonia-muriate of platina with sulphur; also by heating platina and sulphur in an exhausted tube; and by sending sulphuretted hydrogen gas or water into a solution of muriate of platina; this precipitate he calls hydrosulphuret of platina.

He has just noticed the precipitate formed by sulphuret of potash with muriate of platina, but gives no opinion as to the compound obtained this way. He determines three sulphurets, namely,

Subsulphuret,

100

platina

+

19

sulphur

Sulphuret,

100

——

+

28.2

——

Supersulphuret,

100

——

+

38.8

——

I have obtained the sulphuret of platina in five ways: 1st. By pouring sulphuret of lime solution by degrees into muriate of platina, and agitating the mixture well or till it grew black each time; after digesting for some days, repeated filtering, and drying, a black powder is obtained: 2. Instead of sulphuret, hydrosulphuret of lime was used; the precipitate was obtained under like circumstances: 3d. Sulphuretted hydrogen water was used, and the precipitate obtained in like manner: 4th. Ten grains of ammonia-muriate of platina were treated with sulphuretted hydrogen water; by continued agitation the yellow powder disappeared, the liquid looked uniformly black, and at length a precipitate was formed; by repeated filtration and addition of sulphuretted hydrogen water, the whole of the platina was thrown down, and the liquid remained colourless; but it is difficult to discover the exact quantity of sulphuretted hydrogen requisite for any weight of the ammonia-muriate from the tediousness of the operation; 6 grains of well dried black powder were obtained, besides perhaps 1 grain of loss on the filters: 5th. Ammonia-muriate of platina was heated in a covered crucible along with sulphur till it was judged that all the uncombined sulphur was sublimed or dissipated.

All these sulphurets appear to me to be the same when dried in a moderate heat. When exposed to a low red heat they yield water and sulphurous acid, and lose about ⅖ of their weight.

The subject however, requires further investigation. The sulphurets of platina appear of a complex nature, and the proportions of their elements are not yet determined with precision.

15. Sulphurets of silver.

Silver combines with sulphur in two different proportions, and forms two sulphurets, both of them black or dark brown.

1. Protosulphuret of silver. This may be formed either by the dry or humid way: if thin lamina of silver be heated with sulphur, they combine and form this sulphuret; a higher degree of heat expels the sulphur again. It is formed too by passing sulphuretted hydrogen or a hydrosulphuret through a solution of silver in nitric or other acids. The atom of silver unites with that of sulphur, whilst the hydrogen unites with the oxygen. Of course this compound is composed of 90 silver, and 14 sulphur, and the atom weighs 104; or 100 silver unite with 15.5 sulphur. Klaproth finds 100 silver and 17.6 sulphur; Wenzel 100 silver, and 14.7 sulphur; Berzelius 100 silver, and 14.9 sulphur; and Vauquelin 100 silver, and 14 sulphur.

Trisulphuret of silver. This compound is formed whenever neutral nitrate of silver is dropped into a solution of quadrisulphuret of lime or alkali. Mutual saturation seems to take place when eight atoms of nitrate meet with seven of quadrisulphuret. Trisulphuret of silver is constituted of 90 silver, and 42 sulphur; or of 100 silver, and 46.5 sulphur. Its colour is not so dark as that of the protosulphuret. The residuary liquid contains sulphurous acid, which is easily converted into sulphuric by the addition of a portion of lime; and the quantity of acid may then be determined by muriate of barytes.

16. Sulphurets of mercury.

Mercury combines readily with sulphur both in the dry and humid way, and that in several proportions, as under: namely,

1. Protosulphuret of mercury. This is most conveniently formed by passing sulphuretted hydrogen gas through a solution of the protonitrate of mercury, or by pouring hydrosulphuret of lime, &c. into the same solution. The protosulphuret falls down in the state of a black powder. It consists of 167 mercury, and 14 sulphur; or of 100 mercury, and 8.4 sulphur. The theory of its formation is the same as that of silver.

2. Deutosulphuret of mercury. This is formed in the humid way whenever sulphuretted hydrogen or a hydrosulphuret in excess is mixed with the deutonitrate or deutomuriate of mercury (corrosive sublimate); a brown powder is precipitated which is the deutosulphuret. If the sulphuretted hydrogen be only one half what is sufficient to form the deutosulphuret, then we obtain no sulphuret, but instead of it a protonitrate or protomuriate, as was first intimated by Proust; I find however, the atom of sulphur adheres to the atom of salt, and that it is therefore a sulphuretted protonitrate or muriate, whilst 1 atom of oxygen unites with the hydrogen. The brown precipitate does not change to yellow, orange, and red, when left undisturbed for a few days, in my experience; though this is stated to have been observed by Mr. Accum. Notwithstanding the difference in colour, this deutosulphuret must be the same nearly as the cinnabar and vermillion of commerce, if Proust and others are right in their analysis of these articles. The combination of the elements of sulphur and mercury when intended to form cinnabar is made in the dry way by trituration, and a moderate heat: the compound, at first black, is afterwards sublimed by a duly regulated heat and becomes red. This compound must consist of 100 mercury and 17 sulphur nearly.

3. Quadrisulphuret of mercury. This compound is formed when a solution of protonitrate of mercury is treated with quadrisulphuret of lime, added by degrees till the clear liquid no longer gives a dark coloured precipitate. The oxygen of the mercurial salt unites, it should seem, to part of the sulphur, and forms sulphuric acid, whilst the rest of the sulphur unites to the mercury. This sulphuret is a black or dark brown powder, and when heated burns with a blue flame. It consists of 100 mercury, and 33 or 34 sulphur, as appears to me from the synthesis.

When the insoluble muriate of mercury (calomel), is triturated in liquid quadrisulphuret of lime, it is soon decomposed; quadrisulphuret of mercury is formed, with muriate of lime and sulphuric or sulphurous acid.

When the soluble muriate (corrosive sublimate), has quadrisulphuret of lime dropped into it by degrees; at first a yellowish white precipitate is obtained, which increases till it is one half saturated; after this, by continually adding more sulphuret, the precipitate grows darker, and ends in being quite black. It is at least as high as quadrisulphuret. Much sulphurous acid is found in the liquid.

The deutonitrate of mercury, produces a copious yellow precipitate with quadrisulphuret of lime. Exposed to the sun, it grows black in a few minutes on the light side, but continues yellow on the opposite side of the jar; at the same time, an effervescence and disengagement of oxygen gas are observed. Finally, the precipitate becomes the common quadrisulphuret, and the liquid contains sulphurous and sulphuric acids.

The recently precipitated and washed oxides of mercury act upon quadrisulphuret of lime. The black oxide seems to take 4 atoms of sulphur and part with its oxygen to another portion of sulphur; but the red oxide becomes light brown and retains the colour when dried. It seems to take the same sulphur as the black, but whether it retains any of the oxygen, I have not ascertained. The action is more slow than when the nitrates are used, and more quadrisulphuret of lime is expedient.

Mercury and sulphur combine in the dry way by trituration and by heat, forming a black powder; but the species of compounds and quantities of the ingredients combining in this mode, have not been ascertained.

17. Sulphuret of palladium.

Berzelius exposed 15 grains of palladium filings mixed with as much sulphur to a heat sufficient to expel the uncombined sulphur. The increase of weight was 28 per cent. upon the palladium: when exposed afresh with sulphur to heat, no addition was made to the weight.

Vauquelin heated 100 parts of the triple salt of palladium with an equal weight of sulphur, and obtained 52 parts of a blueish white sulphuret, very hard, and when broken exhibiting brilliant plates in its fracture. He had previously found that 100 salt contained 40 to 42 of metal: hence 100 metal combined with from 24 to 30 of sulphur. This agrees nearly with the above results of Berzelius. A very high degree of heat expels the sulphur and oxidizes the metal; but a more moderate heat leaves the palladium of a silver white colour and nearly pure. According to this the atom of protosulphuret of palladium must consist of 50 palladium, and 14 sulphur.

18. Sulphuret of rhodium.

Vauquelin found that 4 parts of the ammonia-muriate of rhodium (containing 28 or 29 per cent. of metal) being mixed with an equal weight of sulphur, and heated, a blueish white button was obtained, weighing 1.4. Hence 100 metal seem to take 25 of sulphur; and allowing this to be the protosulphuret of rhodium, the atom must consist of one rhodium 56, and one sulphur 14, making the whole weight 70.

19. Sulphuret of iridium.

According to Vauquelin, 100 parts of the ammonia-muriate of iridium heated with as much sulphur, yield 60 parts of black powder resembling the other metallic sulphurets; but 100 parts of the salt were found to yield from 42 to 45 of metal. Now supposing the last number the most correct, it should seem that 3 parts iridium take 1 sulphur, or 100 take 33⅓. This being supposed the protosulphuret, the atom of iridium must be 42, and that of the sulphuret 56.

20. Sulphuret of osmium.

It is as yet unknown whether any combination of sulphur and osmium exists.

21. Sulphurets of copper.

Copper readily unites with sulphur both in the dry and humid way. When 3 parts of copper filings are mixed with 1 part of sulphur, and heat applied, a brilliant combustion ensues, which indicates the union of the two bodies. Copper leaf burns in the fumes of sulphur, as Berzelius has observed, with great brilliancy.

The protosulphuret of copper obtained by these similar methods, when pulverized, is black or dark coloured; it has been analyzed by various authors, who nearly agree in their results. Proust finds 100 copper unite with 28 sulphur; Wenzel, 100 copper and 25 sulphur; Vauquelin, 100 copper and 27 sulphur; and Berzelius 100 copper and 25 sulphur.

If the atom of copper be 56, and that of sulphur 14, the atom of protosulphuret of copper will be 70; which gives just 100 copper and 25 sulphur.

The protosulphuret may also be formed in the humid way, by sending sulphuretted hydrogen gas or a hydrosulphuret into a solution of protomuriate of copper, or amongst the recently precipitated protoxide of copper.

Deutosulphuret of copper. This compound is formed whenever sulphuretted hydrogen gas or a hydrosulphuret is sent into a solution of salt containing the deutoxide, or into the deutoxide just precipitated from any acid. It is a dark brown powder not differing much in appearance from the protosulphuret. It consists of 100 copper and 50 sulphur; the weight of the atom is 84.

Quadrisulphuret of copper. This compound is formed by mixing quadrisulphuret of lime with a salt of the deutoxide of copper, and diluting the solution. A light brown precipitate falls immediately, which is the quadrisulphuret of copper. It burns with a blue flame, and leaves the protosulphuret. The atom consists of 56 copper and 56 sulphur, or weighs 112; and hence the sulphuret consists of equal parts copper and sulphur.

The blue hydrate of copper recently precipitated from a salt of copper and washed, acts upon quadrisulphuret of lime; the results, according to my experience, is quadrisulphuret of copper, and the oxygen unites with the sulphur remaining in the liquor.

22. Sulphurets of iron.

Sulphur may be united to iron either by the dry or humid way, and that in various proportions.

Protosulphuret of iron. This compound may be formed by passing a hydrosulphuret into a solution of the green oxide in any acid. It is a black powder. It may also be formed by rubbing a highly heated bar of iron with a roll of sulphur; the two unite in a fluid form and soon congeal into a brownish black mass. It is too a natural production, though not very common; excellent analyses of it, as well as of the common pyrites, were some time ago given by Mr. Hatchett. (See Nicholson’s Journ. VOL. 10.) The protosulphuret is magnetic in a considerable degree; it is soluble in acids, and yields sulphuretted hydrogen. It is proper to notice that the sulphuret of iron is not precipitated from solutions by sulphuretted hydrogen simply or without a base. According to Mr. Hatchett this sulphuret consists of 100 iron, and 57 sulphur, which corresponds with 1 atom iron 25, and 1 of sulphur, 14, nearly.

Deutosulphuret of iron. This is a natural production frequently met with, and in various forms; it is called pyrites, or iron pyrites; it is a yellowish mineral and often appears when broken, of a radiated texture, but sometimes it is crystallized in cubes or dodecahedrons. Acids have little effect upon it, except the nitric, which when diluted attacks both the sulphur and iron; much nitrous gas is produced, the iron is dissolved, and the sulphur chiefly converted into sulphuric acid. This sulphuret consists, according to Proust, of 100 iron, and 90 sulphur, and with this Bucholz recently agrees (Nichols. 27—356); but Hatchett makes it 100 iron, and 112 sulphur. From an experiment of my own on the radiated pyrites, I found nearly equal parts of iron and sulphur. One atom of iron (25,) and two of sulphur (28,) would give 100 to 112; but if the atom of sulphur be only 13, it gives 100 iron to 104 sulphur. Mr. Hatchett unfortunately calculating the proportions of the ingredients in 100 sulphuret, instead of on 100 iron, did not notice that the sulphur in the common pyrites is just double of that in the magnetic pyrites.

Quinsulphuret of iron. This combination consisting of 5 atoms of sulphur with 1 of iron, is formed by mixing a solution of green sulphate of iron with quadrisulphuret of lime in due proportion. I found 50 measures sulphate 1.168 saturate 310 of 1.05 sulphuret diluted so as to become 6 oz.; this yielded 14 grs. dried sulphuret of iron = 3.6 iron, known to be in the sulphate, and 10.4 sulphur; the liquid contained 2+ sulphur combined with the lime and oxygen of the oxide; for it took 2.3 oxygen by means of oxymuriate of lime to convert the sulphur into sulphuric acid together with 1+ from the oxide, making 3+ oxygen, which unites to 2+ sulphur to constitute 5+ sulphuric acid; and this quantity of acid was found to exist by muriate of barytes together with five more brought in by the sulphate of iron. This sulphuret is a yellowish brown powder; it readily exhales sulphur by heat and is reduced to the protosulphuret; but in the open air it burns with a blue flame and leaves the protosulphuret partially, as I apprehend, oxidized. The theory of the formation of quinsulphuret seems to be this: 3 atoms of quadrisulphuret of lime are requisite to saturate 2 of sulphate of iron; the 2 atoms of sulphuric acid seize 2 of lime, three fourths of the sulphur unite to the iron, and one fourth to its oxygen, forming 2 atoms of oxide of sulphur, which attack the 3d atom of sulphuret and decompose it, giving its sulphur to the iron, and neutralizing the lime (for the liquid is found neutral). In this way 10 atoms of sulphur are united to 2 of iron, and 2 of sulphur to 2 of oxygen, with one of lime, which last compound remains in solution, and the oxide of sulphur may be converted into sulphuric acid immediately by the application of oxymuriate of lime.

It is remarkable that neither the green nor the yellow oxides of iron, even when recently precipitated and not dried, seems capable of decomposing quadrisulphuret of lime.

It is probable that trisulphuret and quadrisulphuret of iron may be formed; but I have not ascertained the truth of this opinion.

23. Sulphurets of nickel.

Protosulphuret. According to Proust, nickel unites to sulphur by heat, so that 100 take 46 or 48; the sulphuret is of the colour of common pyrites. (Journ. de Physique, 63 and 80). According to Mr. Ed. Davy 100 nickel take 54 sulphur. By saturating a solution of nitrate of nickel with hydrosulphuret of lime I obtained 40 grains from 33 protoxide or 26 metal. This was evidently the protosulphuret; it was a fine black powder, and consists of 100 metal and 54 sulphur.

Quinsulphuret. This compound may be obtained from nitrate of nickel and quadrisulphuret of lime, in the same manner as that of iron. It is a deep black powder, and consists of 100 nickel, and 215 sulphur. By exposure to heat, the greatest part of the sulphur burns off, and the rest may be expelled by an increase of temperature.

Probably intermediate sulphurets may be formed; but I have not pursued the investigation.

24. Sulphurets of tin.

Sulphur and tin unite both in the dry and humid way, and in various proportions.

Protosulphuret. This may be readily formed in the dry way as follows; let 100 grains of tin be fused in a small iron ladle and heated to 6 or 8 hundred degrees Fahrenheit; let then small pieces of sulphur of 10 or 20 grains be successively dropped into the fused metal: a copious blue flame will instantly arise each time, and a glowing heat will take place, when the sulphur and tin are in contact; as soon as this ceases, another fragment of sulphur must be dropped in, and this two or three times repeated, heating it at last to a perfect red; the mass may then be taken out and pounded in a mortar; a great part of it will be a pulverulent powder, but some portions of malleable metal will still be mixed with it, which may be separated by a sieve. This must be again heated and treated with sulphur as before, and the whole mass will be converted to a sulphuret. I find that 100 parts of tin become in this way 127 grains; which is the due proportion of 52 tin and 14 sulphur, so that no loss of tin is sustained by the process when duly managed. According to Wenzel, 100 tin take 18 sulphur; Bergman, 25; Pelletier, 15 to 20; Proust, 20; but Dr. John Davy and Berzelius find nearly 27 as above stated, and I have no doubt it is near the truth.

The protosulphuret of tin is a dark grey shining powder, with a streak like molybdena or plumbago; it is not much different in colour and appearance from native sulphuret of antimony, only less blue. It is soluble in muriatic acid by heat, and yields sulphuretted hydrogen and protomuriate of tin.

Deutosulphuret. This compound is better known than the former: it may be formed in various ways; one is by heating a mixture of deutoxide of tin and sulphur in a retort almost to a red heat; sulphur sublimes and sulphurous acid is disengaged, and there remains a yellow, light shining, flaky mass at the bottom of the retort which is the sulphuret. It was formerly called aurum musivum or mosaic gold. Pelletier and Proust were of opinion that this product is a sulphuretted oxide of tin; but Dr. John Davy and Berzelius have rendered it more probable that it is a true deutosulphuret, consisting of 100 tin and 54 sulphur. It is insoluble in muriatic or nitric acid, but slowly soluble by the compound of the two acids; it is also soluble in potash by heat. By exposing it to a bright red heat, it burns with a blue flame and leaves a yellowish powder which dues not seem to differ much from protosulphuret.

Berzelius distilled a mixture of protosulphuret and sulphur at a low red heat, and obtained a mass of a yellow grey colour and metallic lustre, which consisted of 100 tin, and 14 sulphur, which is just the mean sulphur between the other two. This would seem to indicate that a compound of the two sulphurets, 1 atom to 1, is capable of being formed.

Hydrosulphuret of tin minor. This compound is formed according to Proust, when sulphuretted hydrogen, or an alkaline or earthy hydrosulphuret is passed into a solution of protomuriate of tin. It is of a brown or dark coffee colour when precipitated, and black when dried. By heat it yields water and protosulphuret. From some experiments I am inclined to believe, that it is formed of 1 atom protosulphuret and 1 of water: or, which is the same, 1 atom protoxide of tin and 1 of sulphuretted hydrogen. If this be right it may be said to be a compound of 100 tin, 27 sulphur and 15 water.

Hydrosulphuret of tin major. This name is given by Proust to the yellow compound thrown down by sulphuretted hydrogen or by hydrosulphurets from solutions of the deutoxide of tin. When dried moderately, the precipitate is of a dull yellow colour, and vitreous fracture, but I find it is almost black, dried in a heat of 150° or upwards. By moderate heat it yields water, sulphurous acid, sulphur, and the residue is deutosulphuret of tin according to Proust. I heated 4 parts of the above previously dried so as to become a black vitreous powder; it burned feebly with a blue flame, and after being made moderately red, left nearly 3 parts exactly resembling the artificial protosulphuret. I believe the dried precipitate will be found to be constituted of 1 atom tin, 2 sulphur and 1 water; that is, 100 tin, 54 sulphur and 15 water = 169 by weight; and that it loses 27 sulphur and 15 water by a red heat, which reduces the weight just one fourth.

Quinsulphuret of tin. This is obtained in the humid way, by first precipitating the oxide, and then putting quadrisulphuret of lime or potash to the liquid containing the precipitate, till the liquid after agitation and subsidence of the precipitate continues of a yellowish colour. I found that 31 measures of protomuriate of tin of 1.377 = 7 grains acid, 7.5 tin and 1 oxygen, precipitated by 10 oz. lime water, required 450 measures of 1.40 sulphuret of lime, containing 16 sulphur and 7.2 lime, for their saturation. The residuary liquid was nearly colourless, and the precipitate dried in an oven of 100° or more, for 10 hours, weighed 17 grains besides loss in the operation. It was a yellow, vitreous mass, and when pulverized and heated, burned with a blue flame, and lost 40 per cent. in weight; the residue was a yellow grey colour, and seemed to be like the intermediate sulphuret of Berzelius; it would not give sulphuretted hydrogen by hot muriatic acid. Now if 52 (1 atom tin) ∶ 70 (5 atoms sulphur) ∷ 7.5 tin ∶ 10+ sulphur; hence the sulphuret should have weighed 17.5 grains, which was the observed weight, allowing ½ grain for loss. According to this, 100 tin combine with 135 sulphur, and when burnt, the 235 are reduced to 140, the weight observed by Berzelius in the instance alluded to. The liquid required 5 grains of oxygen from oxymuriate of lime, to convert the sulphur into sulphuric acid, and the weight of this acid, found by muriate of barytes, was 11 grains, indicating 4.4 sulphur. It may be observed that the 4.4 grains, and 10 grains, do not make up the whole (16) of the sulphuret of lime; but the reason I apprehend was, that the quadrisulphuret was old, and did not contain the full share of sulphur, it being usual for a small part to fall by time.

The deutomuriate of tin, precipitating the oxide in like manner, yielded a sulphuret rather lighter yellow than the above; about 10 tin gave 25 grains of sulphuret dried in a temperature of 80 to 100°. This compound still contained water, and I suspect it will be found constituted of 1 atom tin, 5 sulphur, and 2 water.

25. Sulphurets of lead.

Lead combines with sulphur in various proportions, some of which are natural productions of great purity.

Protosulphuret. This is a natural production which is called galena; it is of lead grey colour and metallic appearance, and is found both in masses and crystallized; its sp. gr. is about 7.5. It may be formed artificially by heating lead or its oxide with sulphur; also by treating a solution of lead with sulphuretted hydrogen or with a hydrosulphuret. Authors are well agreed as to the proportions of the ingredients; 100 lead combine with from 15 to 16 sulphur. That is, 90 lead with 14 sulphur; or 1 atom of lead with 1 of sulphur.

Deutosulphuret. Dr. Thomson mentions a natural production or species of galena which contains twice the quantity of sulphur of that above. I have reason to believe that this compound is easily formed in the humid way, by treating the precipitated oxide with the due quantity of quadrisulphuret of lime.

Trisulphuret and quadrisulphuret. These compounds, I find, may be formed by means of quadrisulphuret of lime or potash. When a solution of any salt of lead or the recently precipitated and moist oxide, is treated with the requisite quantity of quadrisulphuret of lime, a combination consisting of 1 atom of lead and 3 of sulphur is formed. It is a black powder not differing much in appearance from the protosulphuret; it is lighter and more spongy. It consists of 100 lead and 46 or 47 sulphur. The due proportions of the elements to form the above compound are, lead 100 parts in solution, and sulphur, 62 parts; ¼ of the sulphur is retained by the lime, and may be converted into sulphuric acid instantly by the addition of as much oxymuriate of lime as contains oxygen equal in weight to the sulphur, as it has already as much oxygen as converts it into sulphurous oxide, derived from the oxide of lead.

Quadrisulphuret of lead is to be obtained in the same way; only we must have an excess of the sulphuret of lime, or more than 80 sulphur for 100 lead in solution, as ⅕ part of the sulphur at least is retained by the lime. The quadrisulphuret is a black powder like the others; it burns with a blue flame and loses nearly 40 per cent., the residue being still black. It consists of 100 lead and 62 sulphur.

I have not ascertained whether any higher sulphuret of lead is capable of being formed this way.

It has been already noticed (page 109), that a beautiful white, silvery sulphuretted sulphite of lead is formed and gradually precipitated, when nitrate of lead is dropped into a solution where as much black quadrisulphuret of lead has been just thrown down as the sulphuret of lime can form.

26. Sulphurets of zinc.

Zinc and sulphur are scarcely to be united directly by heat; but by heating the oxide of zinc and sulphur together, a combination is effected; part of the sulphur carries off the oxygen in sulphurous acid, and part combines with the zinc. Mineralogists give the name of blende to a mineral which is chiefly the protosulphuret of zinc: its colour is yellowish, brown, or black almost like galena: its specific gravity is usually 3.9 or 4.

Protosulphuret. The above artificial compound, or the mineral, may be taken as examples of the union of 1 atom zinc and 1 sulphur. But the most correct and convenient way of forming it for the purpose of chemical investigation is, to drop a given portion of some salt of zinc into a dilute hydrosulphuret. A white precipitate falls, which when dried becomes a dark cream colour. It is found to consist of 2 parts zinc and 1 of sulphur nearly; that is, of 29 parts zinc and 14 sulphur.

Deutosulphuret, trisulphuret, &c. of zinc. These combinations may be made, up to the 5th or quinsulphuret, in the humid way by quadrisulphuret of lime, &c. The oxide may be first precipitated by lime water, or not, as we please, and then treated with quadrisulphuret according to the degree of sulphuration required. I found 100 measures of 1.29 nitrate of zinc with 2500 of 1.026 sulphuret of lime yield 40 grs. dry sulphuret zinc, of a yellowish white colour; the liquid was found to retain 13 or 14 grains of sulphur, by converting it into sulphuric acid by means of oxymuriate of lime. The nitrate contained 11½ zinc and 2.8 oxygen; so that about 28 sulphur had combined with the zinc, and about 14 remained in solution, or ⅓ of the whole, as has been already explained. By proportion, if 11½ ∶ 28 ∷ 29 ∶ 70; or 1 atom of zinc (29) combines with 5 atoms of sulphur (70). The intermediate combinations I have not particularly examined; they do not differ much in appearance from the one just described; they burn blue and are reduced by it to the protosulphuret; and they give sulphuretted hydrogen by muriatic acid.

27 and 28. Sulphurets of potassium

and sodium.

According to Davy and Gay Lussac, potassium and sodium unite with sulphur by heat with vivid combustion. The compounds appear to be protosulphurets, that of potash being nearly as 35 potassium to 14 sulphur, and that of sodium as 21 sodium to 14 sulphur. When potassium and sodium are heated along with sulphuretted hydrogen, an union likewise takes place; two atoms of gas unite to one of the metals, except that 1 atom of hydrogen is liberated, corresponding of course in quantity to that liberated by treating them with water. When the compound thus formed is treated with muriatic or sulphuric acid, the same quantity of sulphuretted hydrogen nearly is liberated that was originally combined. So that the compound may be regarded as sulphuretted hydrogen united to the protosulphurets. The colour of these sulphurets varies from grey to yellow or reddish.

29. Sulphurets of bismuth.

Protosulphuret. Bismuth combines with sulphur by heat, in the manner already described in the account of tin sulphurets. I found 100 parts bismuth in this way combine with 22 sulphur after 4 operations: this is therefore the protosulphuret or 1 atom bismuth (62) with 1 of sulphur (14). It may also be formed by substituting the oxide of bismuth for the metal. It has a dark brown or black metallic appearance, much like that of tin. It yields sulphuretted hydrogen in heated muriatic acid.

Hydrosulphuret of bismuth. When a solution of bismuth in nitro-muriatic acid is dropped into hydrosulphuret of lime, a black powder precipitates, which, when dried in the common temperature, appears to be hydrosulphuret of bismuth, or one atom sulphuretted hydrogen and one oxide of bismuth. It yields sulphuretted hydrogen by cold muriatic acid. But if the precipitate be dried in a heat of about 200°, the atom of water seems to be expelled, and there remains only the protosulphuret. Thus I found 69 parts oxide of bismuth unite to 15 sulphuretted hydrogen to form 84 hydrosulphuret of bismuth, when dried in the air; but upon being heated a little, it lost 8 parts of water and was reduced to the protosulphuret, retaining in great part the same appearance as before.

Deutosulphuret and trisulphuret of bismuth with oxygen. When nitro-muriate of bismuth is thrown into water the oxide is precipitated; if the acid water be decanted, quadrisulphuret of lime be put to the moist oxide and due agitation be used, the oxide abstracts sulphur from the lime so as to obtain 2 or 3 atoms for each one, if the sulphur be sufficient in quantity. To 6 oz. water I put 100 grain measures of 1.286 nitro-muriate, which I knew from its formation contained 20 oxide; after the precipitate had subsided I poured off 5 oz. of acid water, and to the remaining precipitate diluted with water I put 300 of 1.056 sulphuret of lime and agitated for 10 minutes. There were obtained 33 grains of brownish black sulphuret of bismuth dried for some hours in a temperature of 120°. I put the above 33 grains into a gas bottle with 100 muriatic acid and boiled it; there were obtained only 2 or 3 cubic inches of sulphuretted hydrogen, the oxide was dissolved and sulphur liberated; the sulphur collected and dried weighed 9 grains, and the oxide precipitated again from the muriatic acid by water and dried, weighed 17 grains, besides loss. From this it is evident the oxygen of the oxide must have been chiefly retained in the compound, and must have united to 2, and in great part to 3, atoms of sulphur. For 20 oxide would require 12 sulphur to form trisulphuretted oxide; and there was evidence of its having nearly, if not wholly, that quantity.

30. Sulphurets of antimony.

Protosulphuret. This is a natural production, and found in the state of a dark grey mineral of metallic appearance, and of the sp. gr. 4.2. It may also be formed artificially by uniting metallic antimony and sulphur by heat. Most authors nearly concur in assigning to it 74 parts antimony and 26 sulphur, per cent. That is, 1 atom antimony (40) and 1 of sulphur (14). It yields sulphuretted hydrogen by muriatic acid and heat, and a solution of the metallic oxide is obtained.

Hydrosulphuret. When antimony is precipitated from a solution, by sulphuretted hydrogen or a hydrosulphuret, or from an alkaline solution of the sulphuret by an acid, it appears in the form of an orange yellow powder, denominated golden sulphuret. It is constituted of 1 atom sulphuretted hydrogen and 1 of protoxide of antimony; it readily yields sulphuretted hydrogen by muriatic acid, and the oxide combines with this acid. Exposed to heat, water is expelled and protosulphuret left. It is constituted of 40 antimony, 7 oxygen, 14 sulphur and 1 hydrogen; or of 54 protosulphuret and 8 water.

Bisulphuretted, trisulphuretted and quadrisulphuretted oxide of antimony. When crystallized muriate of antimony is agitated along with dilute quadrisulphuret of lime, an orange yellow compound is formed, consisting of the oxide and sulphur. To 350 quadrisulphuret of lime, diluted with lime water, I put 22 grains moist crystals of muriate, and agitated well for some time. Got 26 grains dry yellow sulphuret, which heated burned blue, and left from 13 to 14 black grey sulphuret, equal to 10 antimony nearly; hence it must have been a quadrisulphuret, or rather sulphuretted oxide; for, by heating this compound in muriatic acid, a solution is obtained and sulphur liberated without the extrication of gas. Less of the sulphuret of lime would have produced a sulphuret of the same colour, but containing less of sulphur; so that it is evident various proportions may exist in combination. Instead of the crystallized muriate, the recently precipitated oxide, nearly free from acid, may be used to produce these compounds.

31. Sulphuret of tellurium.

Tellurium unites with nearly its weight of sulphur, by heat, according to Davy. It is probable that as usual in such cases, a protosulphuret is formed. This would lead to the conclusion that the atom of tellurium is only equal in weight to that of sulphur; which does not accord with results from the other combinations of tellurium, and hence the above fact may not perhaps be sufficiently ascertained.

32. Sulphurets of arsenic.

Arsenic may be combined with sulphur by exposing a mixture of the metal and sulphur or of the white oxide and sulphur, to a heat approaching to redness. In the latter case more sulphur is required, because the oxygen is carried off in the shape of sulphurous acid. Three parts of arsenic with two, three or more of sulphur may be used; the heat should be less if a greater proportion of sulphur is intended to be united. As both the elements are volatile in a moderate heat, and that in unequal degrees, considerable difficulty occurs in ascertaining by the synthetic mode, the proportions of the elements combined; if too little heat be used, only a mechanical mixture is obtained, of any proportions we please; if too much heat be used, part of the arsenic as well as part of the sulphur sublimes, and the sulphuret itself sublimes at a heat not much exceeding that required for their union. Hence in a great measure we have the discordant results of those who have taken the synthetic method. The analytic method is to be preferred, and those who have taken it have succeeded the best; but even this is attended with greater difficulties than with most of the other sulphurets.

The artificial sulphurets of arsenic constitute two varieties chiefly, and these are also found native in various parts of the earth.

Protosulphuret. Native sulphuret of arsenic, called orpiment, is found in Turkey and elsewhere in considerable masses; when broken it exhibits a foliated structure, somewhat flexible, and of a brilliant golden yellow colour. Its specific gravity is usually about 3.2; at least that was the case with the specimen I used. When heated so as to be near melting, its surface reddens, probably by the loss of sulphur. The same sulphuret is procured artificially in the humid way whenever a solution of the oxide of arsenic in water, &c. is treated with sulphuretted hydrogen, or a hydrosulphuret, and afterwards with an acid; or when this or any other species of sulphuret of arsenic is dissolved in an alkali and the solution treated with an acid. Kirwan in 1796 states, that it is generally thought to consist of 100 arsenic and 11 sulphur, but that Westrumb says it contains 100 arsenic and 400 sulphur, which Kirwan thinks more probable; they are both however very wide of the truth. Thenard, in the 59 VOL. of the An. de Chimie, 1806, asserts that it consists of 100 arsenic and 75 sulphur; but he does not point out the experiments on which this result rests; and it is not very near the truth. Laugier in the same An. VOL. 85, for 1813, in a paper of great merit, finds the native orpiment to contain 38 per cent. of sulphur; his method is to dissolve the orpiment in warm dilute nitric acid; to precipitate the sulphuric acid by nitrate of barytes, and from the sulphate of barytes infer the sulphur; the rest he considers as arsenic, not knowing how to detach the arsenic acid from the nitric acid so as to determine the arsenic by experiment. I have pursued this method with the advantage of being able to determine the arsenic as well as the sulphur: Ten grains of orpiment in fine powder were dissolved in 100 measures of 1.346 nitric acid diluted with as much water, by digesting in a heat so as to keep a constant moderate effervescence for about 2 hours. The liquid obtained, being diluted, yielded 536 measures of 1.061. By carefully and gradually dropping in muriate of barytes I found 150 measures of 1.162 just sufficient to saturate the sulphuric acid, and the sulphate of barytes produced dry was 28 grains, the loss I estimated 1 grain: now one third part being sulphuric acid, and ⅖ of the acid being sulphur, we have ²/₁₅ of 29 = 3.87, or 3.9 for sulphur. The residuary liquid was then treated with lime water till an excess was manifest, and produced no farther precipitate; the arseniate of lime was collected and dried, and gave 16 grains. Now I had determined by experiments hereafter to be related, that ⁴/₇ of arseniate of lime are acid and ⅔ of the acid are arsenic; hence ⁸/₂₁ of 16 = 6.1 for the arsenic, which added to 3.9 sulphur, make up the 10 grains of orpiment.

When this orpiment is treated with caustic alkali, it is completely dissolved; it is thrown down by acids I find unaltered. If 61 arsenic combine with 39 sulphur, 100 must take 64 nearly; which corresponds with 1 atom of each, or 21 arsenic + 13 or 14 sulphur.

Subprotosulphuret. Sulphur and arsenic are found native in certain places, combined in masses of a brownish red or orange colour and glassy fracture: this combination is called realgar, and is also manufactured in large quantities in Saxony, chiefly for the use of calico-printers. Its constitution and specific gravity vary considerably, owing chiefly I imagine to the greater or less heat to which it is exposed, and to the proportions of the elements in the first mixture. I have specimens of 3.3 and 3.7 sp. gr.; and it is probable these are not the extremes; the heaviest is the darkest colour. Of course the heaviest contains the most arsenic, and I have reason to believe that the sp. gr. is nearly as good a test of the proportions of the elements as chemical analysis. Realga when pulverized is of an orange colour: it is much sooner dissolved in dilute nitric acid and requires less, than the same weight of orpiment. Caustic alkali dissolves it partially, taking up the protosulphuret and leaving the excess of arsenic, the quantity of which may hence be ascertained. Ten grains of realgar took 80 measures of 1.347 nitric acid, diluted with as much water; digested in a heat of about 150° it was all dissolved in 1½ hour, and yielded 536 liquid of 1.05 sp. gravity. This treated as before gave 24 sulphate of barytes = 3.2 sulphur, and 18 arseniate of lime = 6.9 arsenic. This result agrees nearly with Laugier’s in regard to the sulphur in native realgar: but the artificial realgar, which he made by combining arsenic and sulphur, yielded him 40 per cent. sulphur by my estimation and 42 by his own: the sp. gravity of his artificial realgar is not given. Westrumb estimates realgar at 100 arsenic and 25 sulphur, and Thenard at 100 arsenic and 33 sulphur. But from the above it must be concluded to contain 100 arsenic and 45 to 50 of sulphur. One hundred parts of the same realgar heated in caustic potash were resolved into 78 orpiment taken up by the liquid and 22 arsenic precipitated.

It appears to me most probable that a true subsulphuret would be most convenient for the printers’ use, or one containing 100 arsenic and 32 sulphur, that is, 2 atoms arsenic and 1 sulphur. The object being to deoxidize indigo and obtain it in solution in a green state, we may suppose that 1 atom arsenic takes the oxygen from the indigo and then forms arseniate of lime which precipitates, whilst the other atom in union with the sulphur, takes the green indigo and unites it to the potash, making a quadruple compound of arsenic, sulphur, green indigo and potash in solution. If this view be right the heaviest and darkest coloured realgar of commerce must be the most advantageous for this purpose. Some printers however prefer the protosulphuret.

Deutosulphuret. Proust, by heating 100 arsenic with 300 sulphur in one instance got 222 parts, and in another 234 parts of a transparent deep greenish yellow sulphuret, (Jour. de Phys. 59—p. 406. 1804). Now it is very remarkable that if we take the atom of sulphur at 13 and that of arsenic 21, one of this and two of the former will be found as 100 to 124, together 224; but if sulphur be 14, then the proportion will be 100 to 133, together 233. It seems more than probable that Proust had accidentally used that degree of heat in the combination which is requisite for forming the deutosulphuret. It is probable too that Laugier always used a higher heat, as he uniformly obtained the same (lower) sulphuret whatever were the proportions, the excess of either being sublimed or separated by the heat.

Trisulphuret, quadrisulphuret, &c. When a solution of the oxide of arsenic is treated with quadrisulphuret of lime, little precipitate appears; but if muriatic acid be dropped in, a fine yellow precipitate is formed. This I have reason to think is sometimes a trisulphuret, and at other times a quadrisulphuret or higher; but it is difficult to investigate these compounds, and on that account I speak with some uncertainty.

33. Sulphuret of cobalt.

Sulphuretted hydrogen does not precipitate cobalt from solutions containing that metal; but hydrosulphurets precipitate it.

Protosulphuret. This compound is obtained whenever a neutral solution of cobalt is treated with hydrosulphuret of lime, &c. or it may be obtained from any acid solution by first precipitating the blue oxide by an alkali, and then introducing sulphuretted hydrogen into the mixture. By this last method I found a solution previously known to contain 44 parts by weight of protoxide to absorb 15 parts of sulphuretted hydrogen; when filtered and dried in a heat of 100° it yielded 51 parts of protosulphuret. In appearance it resembles many of the other black sulphurets. It consists of 100 cobalt and 38 sulphur; Proust finds 40 sulphur, but he considers it only an approximation.

The same sulphuret may be formed by heating the oxides of cobalt and sulphur together to a red heat; at least a combination is effected as Proust observed, but I have not investigated the proportions. Sulphur does not seem to combine with the metal in this way.

Deutosulphuret ... dodecasulphuret. When the recently precipitated and moist oxide of cobalt, the neutral muriate, or acid muriate of cobalt, as well as other salts of the same, are treated with dilute quadrisulphuret of lime, sulphurets of cobalt are formed in various proportions according to the ingredients, from the deutosulphuret to the dodecasulphuret: these precipitates are all black and not easily distinguished in appearance; but there is reason to believe they are true chemical compounds.

34. Sulphurets of manganese.

Though sulphur and manganese do not unite directly, they can be brought into union by intermediate bodies, both in the dry and humid way.

Protosulphuret. This compound may be formed by heating to a low red, a mixture of the oxide of manganese and sulphur, or of the white carbonate of manganese and sulphur; or it may be formed by treating a solution of manganese by a hydrosulphuret, (sulphuretted hydrogen not producing any precipitate); this last method seems to produce a dry hydrosulphuret of manganese, which being heated to red nearly, parts with water and a little sulphur and there remains the protosulphuret. The protosulphuret is of a snuff brown colour; but the hydrosulphuret, when recently precipitated is of a light drab colour, which grows deeper when exposed to the air, and when dried becomes brown like the protosulphuret; when heated, the colour is not much changed. The hydrosulphuret of manganese gives sulphuretted hydrogen by cold muriatic acid, and the protosulphuret gives the same by the acid heated.

The proportion of the elements in the protosulphuret may be inferred from the fact that the black oxide yields its own weight of protosulphuret; that is, 156 grains, composed of 100 metal and 56 oxygen give 156 of sulphuret; hence the atom of metal, 25, unites with one of sulphur, 14. I found 32 of the protoxide in solution unite to 15 of sulphuretted hydrogen to form 47 hydrosulphuret dried in 100°. This lost about 8 parts or rather upwards by heat.

Deutosulphuret, trisulphuret and quadrisulphuret. These may be formed by treating neutral solutions of manganese, or the recently precipitated oxide, by quadrisulphuret of lime. They are formed somewhat slowly and by considerable agitation with a smaller or greater proportion of the lime sulphuret. They are all light drab, and are reduced to the protosulphuret by heat.

35. Sulphuret of chromium.

I have not had an opportunity of ascertaining whether chromium or its oxides combine with sulphur or not, though several attempts were made for that purpose.

36. Sulphuret of uranium.

From the experiments of Bucholz it would seem that uranium may be combined with sulphur, but the proportions have not been ascertained. (An. de Chimie. 56—142.)

37. Sulphuret of molybdenum.

From Bucholz and Klaproth’s analyses of molybdena it would seem that the native sulphuret consists of 60 metal and 40 sulphur; but it does not appear whether this should be considered as the protosulphuret or the deutosulphuret. If it is the protosulphuret the atom of molybdenum weighs 21, but if the deutosulphuret, the atom of metal weighs 42; and the atom of the sulphuret or molybdena must weigh either 35 or 70.

38. Sulphuret of tungsten.

According to Berzelius, a sulphuret of tungsten may be obtained, by heating a mixture of tungstic acid and sulphuret of mercury in the proportion of 1 to 4, in a crucible. The mixture in his experiment was covered with charcoal and the crucible inclosed in another containing charcoal; the whole was then exposed to the heat of a furnace for half an hour. The sulphuret obtained was a greyish black powder; it was found to consist of 100 metal and 33¼ sulphur, or about 3 metal to 1 sulphur. Hence this must be the deutosulphuret if we consider the atom of tungsten to be 84; but considering the high degree of heat to which it was exposed, it would seem more likely to be the protosulphuret; if so, the atom of tungsten must be considered as 42 only, or half of the other number.

39. Sulphuret of titanium.

No compound of titanium and sulphur has been formed.

40. Sulphuret of columbium.

This combination is unknown.

41. Sulphuret of cerium.

This combination is also unknown.

SECTION 15.

EARTHY, ALKALINE, METALLIC AND

OTHER PHOSPHURETS.

Phosphorus like sulphur is capable of being combined with several of the earths and metals as well as with other bodies; but the combination is not so easily effected, and the products are less interesting than those of sulphur: from considerations of these circumstances together with those of the expence and danger in making experiments on phosphorus we may account for, this class of bodies being as yet imperfectly known.

Margraf in 1740 attempted to combine phosphorus with many of the metals; but his experiments were mostly unsuccessful.

Gengembre in 1783 endeavoured to unite phosphorus with the alkalies; in this he failed of success, but discovered the phosphuret of hydrogen, or the spontaneously inflammable gas now denominated phosphuretted hydrogen. (Journal de Physique, 1785.)

In 1786 Mr. Kirwan published some experiments on phosphuretted hydrogen, (Philos. Trans.); he ascertained that water impregnated with this gas had the property of precipitating various metals from their solutions.

The ingenious and indefatigable Pelletier has more merit than any other person in his investigations of the phosphurets. An important memoir of his on the manufacture of phosphorus in the large, is given in the Journal de Physique for 1785; in this he states that 4 or 5 lbs. sulphuric acid are commonly requisite for 6 lbs. calcined bones; and that from 18 lbs. calcined bones he obtained by the usual process, 12 oz. of phosphorus. In 1788 he read an essay on the phosphurets of gold, platina, silver, copper, iron, lead and tin. (An. de Chimie, 1—106). In 1790 he published an essay on the combinations of phosphorus with sulphur. (Ibid. 4—1). An additional memoir was published in 1792 on the same metallic phosphurets; and another on the phosphurets of mercury, zinc, bismuth, antimony, cobalt, nickel, manganese, arsenic and the other metals.

M. Raymond in the An. de Chimie, 1791, recommends, instead of potash, moist hydrate of lime and phosphorus in order to obtain phosphuretted hydrogen with greater facility; and in the same Annals for 1800 he asserts that water absorbs a considerable portion of phosphuretted hydrogen, and becomes capable of precipitating metals from their solutions in acids, and of forming phosphurets, in this respect resembling sulphuretted hydrogen.

Mr. Tennant discovered in 1791 that carbonic acid combined with the earths and alkalies is capable of decomposition by phosphorus, in a red heat; and Dr. Pearson, following up the discovery, found that pure or caustic lime may be united to phosphorus by heat so as to form phosphuret of lime; and that this dry compound when put into water is decomposed and gives out bubbles of phosphuretted hydrogen gas, which as usual explode spontaneously on reaching the surface of the water and coming into contact with the air.

In 1810 I published the method of analysing phosphuretted hydrogen by Volta’s eudiometer; having found that this gas and oxygen may be mixed together in a narrow tube without explosion and afterwards exploded as other similar mixtures by an electric spark.

Dr. Thomson published an essay on phosphuretted hydrogen in the Annals of Philosophy for August, 1816. He agrees with me very nearly as to the constitution and properties of this gas, as far as I have gone; but he has ascertained several additional properties of the gas, which I shall advert to in the sequel.

Sir H. Davy and Gay Lussac have investigated several compounds of phosphorus, particularly with muriatic and oxymuriatic acids, and with the new metals potassium and sodium, which I shall have to notice in their proper places.

Other authors have written on phosphurets besides those I have mentioned, but they do not require to be particularly distinguished in this enumeration. We shall therefore proceed to describe the phosphurets more particularly.

1. Phosphuret of hydrogen.

From recent experiments which I have made on phosphuretted hydrogen gas, I find the account already given (VOL. 1. page 456) is deficient, and in several respects inaccurate; I shall therefore substitute the following, as more perfect and correct.

Phosphuretted hydrogen may be obtained nearly pure, by the methods recommended by Dr. Thomson. Phosphuret of lime that has been carefully secluded from the atmosphere, may be put into a small phial filled with water, acidulated by muriatic acid; into this a cork with a bent tube must be immediately put under water, so that the phial and tube are both full of water; gas soon begins to appear, which rising to the top of the phial, expels a corresponding portion of water, and in due time the gas itself comes over and may be received as usual: if the phial in which the gas is generated be warmed to 140 or 150°, the gas is given out more readily. A half ounce phial with 20 grains of phosphuret in small lumps, will produce 3 or 4 cubic inches of gas. If the phosphuret of lime has been previously exposed for a few hours to the atmosphere, the gas is more abundant, but consists chiefly of hydrogen, mixed with a little phosphuretted hydrogen.

Pure phosphuretted hydrogen is distinguished by the following properties: 1. It explodes when coming into the atmosphere in bubbles, and a white ring of smoke subsequently ascends: 2. It is unfit for respiration, and for supporting combustion: 3. Its specific gravity is 1.1 nearly, that of atmospheric air being unity: 4. Water absorbs fully ⅛ of its bulk of this gas, which is expelled again by ebullition or by agitation with other gases, but not without some loss: 5. A small portion being electrified for some time, deposits abundance of phosphorus, and expands from one volume to 1⅓ nearly, which is found to be pure hydrogen: 6. Liquid oxymuriate of lime absorbs phosphuretted hydrogen, converting it into phosphoric acid and water, and leaves any free hydrogen that may be present; hence we are enabled to ascertain the proportion of free hydrogen in any such mixture, an important point as far as regards this gas: 7. One volume of pure phosphuretted hydrogen, requires two volumes of oxygen for its complete combustion by an electric spark, in Volta’s eudiometer; (the gases must be previously mixed in a tube not more than ³/₁₀ of an inch in diameter, to prevent an explosion in the act of mixing, after which they may safely be transferred into any other vessel); the result of the combustion is phosphoric acid and water: 8. One volume of phosphuretted hydrogen, mixed with from 2 to 6 volumes of nitrous gas, may be exploded by electricity in Volta’s eudiometer; or it may be exploded by sending up a bubble of oxygen, without electricity; in like manner, may the mixtures of phosphuretted hydrogen and oxygen be exploded by a bubble of nitrous gas: 9. One volume of phosphuretted hydrogen, mixed with 4, less or more, of nitrous oxide, is also explosive by electricity, but the mixture undergoes no change without electricity, at least in a day: 10. Mixtures of phosphuretted hydrogen and nitrous gas have a slow chemical action, by which in from 1 to 12 hours, the phosphuretted hydrogen is burnt and the nitrous gas decomposed into nitrous oxide and azotic gas: 11. According to Sir H. Davy and Dr. Thomson, phosphuretted hydrogen gas being heated along with sulphur in a dry tube, the gas is decomposed and a new gas, sulphuretted hydrogen, is formed, and the phosphorus unites with the sulphur. Davy says the gas is doubled in volume by this operation; but Thomson says it remains the same; some doubt therefore exists respecting this fact: 12. When phosphuretted hydrogen gas is let up to oxymuriatic acid gas, a quick combustion with a yellow flame is observed, and the result varies according to the proportions: when one volume phosphuretted hydrogen is put to 3 or 4 of acid gas, both of the gases disappear, and muriatic and phosphoric acids are produced.

As these properties differ in many respects from those hitherto assigned to this gas, it will be necessary to enlarge upon them. The sp. gr. of this gas has already been adverted to, (VOL. 1.), and its great variation from .3 to .85; more recently Dr. Thomson finds it about .9. In all these instances it was, I have no doubt, contaminated with less or more of hydrogen; at least it was so in my own instance; for, I have the proportion of oxygen which it required for its complete combustion, both before and after it was weighed. It was what I then thought pure gas: that is, 100 volumes required nearly 150 of oxygen; but I am now convinced that gas of this description contains ⅓ of its volume of free hydrogen; hence the correction of the sp. gravity. Davy estimates the sp. gr. of the gas which he denominates hydrophosphoric at .87 or 12 times that of hydrogen; this gas, as will appear from this and other properties, is in all probability phosphuretted hydrogen gas, nearly pure.

The absorption of this gas by water, has been stated variously. In 1799 M. Raymond found that water absorbs rather less than ¼ of its volume of this gas: in 1802, Dr. Henry rates its absorption at ¹/₄₇ only; in 1810 I found it ¹/₂₇; in 1812, Davy found it (hydrophosphoric gas) to be ⅛; in 1816, Dr. Thomson found it to be ¹/₄₇; I now estimate it as stated above at ⅛. These enormous differences may be partly accounted for by varieties in the gas; and partly from the theory of the absorption not being understood; but these are scarcely sufficient excuses in all the cases. I find that my early experiments on the absorption of phosphuretted hydrogen by water, were made prior to the discovery of the method of analysing the gas by electric combustion; consequently they were deficient in regard to the quality of the gas, both before and after agitation; the best gas that ever I had, was such as took 150 oxygen per cent. for its combustion, exclusive of any common air; and it was often such as to require considerably less. The bottle which I used for the purpose in 1810 contains 2700 grains of water; at first I charged water with hydrogen: into this 120 grain measures of phosphuretted hydrogen were put, and the whole well agitated: there were left 98 measures;—this proved that the gas was more absorbable than hydrogen: into the same water were put 98 more phosphuretted hydrogen and agitated; out, 80; this confirmed the proof: Into the same water were put 97 hydrogen and agitated well; out 105: This shewed that the hydrogen had expelled a part of the gas again, and was less absorbable of the two. As the phenomena were much the same as if oxygen had been used instead of phosphuretted hydrogen, it was concluded to have the same absorbability.

In the present instance, however, I have been more circumstantial; after repeatedly agitating water with pure azotic gas, so as to saturate it and expel the oxygen, I then put in 110 grain measures of phosphuretted hydrogen composed of 100 pure gas, 5 hydrogen, and 5 azotic gas or rather atmospheric air. After due agitation, all was absorbed but 35; this was mixed with a known portion of oxygen and exploded; the diminution was 19 measures; the oxygen remaining was determined by hydrogen; from which it appeared that 10 combustible gas had taken 9 oxygen. Now 10 being ²/₇ of 35, we may consider the water as ²/₇ impregnated with the phosphuretted hydrogen, and ⁵/₇ with azote; but as there were 105 combustible gas and only 10 left, 95 must have entered the water and caused it to be ²/⁷ charged with the gas; whence we may infer that 332 gas would have been a full charge for 2700 water, which is almost exactly ⅛, as stated above. Other experiments gave corresponding results. On admitting 51 azotic gas to the water, and agitating it a good deal for 4 or 5 minutes, there came out 51 measures or the same volume: this was found in the same way to consist of 43 azote and 8 combustible, which took 10 oxygen. Again 51 azote was agitated in the water, and there came out 51, of which 5 + were combustible and took 9 oxygen. After this the bottle of water was put into a pan of water which was raised to the boiling heat, a bent tube filled with water being adapted to the water bottle, and having its end immersed in water: by this operation gas was expelled from the water, and caught in the neck of the bottle; when it amounted to 22 grain measures it was transferred and was found to consist of 17 azote + 5 + combustible, which took 10 oxygen. By these experiments we see that the gas is expelled again from the water, both by ebullition and by other gases, nearly the same in quality, but much diminished in quantity, the reason of which is not very obvious. The liquid now required 30 measures of oxymuriate of lime, equivalent to 100 measures of oxygen, before it was saturated; that is, there appeared to be 50 phosphuretted hydrogen remaining in the water. Adding a little lime water threw down a very sensible quantity of phosphate of lime.

The expansion of phosphuretted hydrogen by electricity is a subject on which there has been as much diversity as on its absorption. In 1797, Dr. Henry found that it expanded “equally with carbonated hydrogen.” (Philos. Trans.). In 1800, Davy states that phosphuretted hydrogen was not altered in volume by electricity. (Researches, page 303.) In 1810, my experiments led me to adopt the same conclusion. In 1811, Gay Lussac found (Recherches, page 214), that potassium heated in phosphuretted hydrogen gas, expanded 100 volumes to 146; he infers that the true expansion ought to have been to 150. In 1812, Davy observes, that when electric sparks are passed through gases of this kind, “usually there is no change of volume.” (Elements of Chem. Philos. p. 294.) But he adds that when a gas (sp. gr. 6, hyd. being 1) was heated with zinc filings over mercury, there was an expansion of volume of more than ⅓. Also potassium heated in it, made 2 parts become 3 or 3, parts rather more than 4, (1810); the residual gas in these cases was pure hydrogen. Hydrophosphoric gas (sp. gr. 12) yielded 2 volumes of hydrogen, by heating potassium in it. In 1816, Dr. Thomson found that by electric sparks phosphorus was deposited, and hydrogen remained “exactly equal to the original bulk of the phosphuretted hydrogen.” Lastly, in 1817, I found by two experiments, that by electrifying 30 grain measures of phosphuretted hydrogen in a tube over water, uninterruptedly for nearly 2 hours, I produced an expansion of ⅕, or the gas became 36 measures; originally the gas contained 2½ common air, and the rest was combustible so that 100 measures took 190 oxygen. By exploding the residue with oxygen, I found that ¹/₁₅ or ¹/₂₀ of the phosphuretted hydrogen still remained undecomposed. Taking these observations into consideration along with the fact, that 1 volume of the purest gas requires 2 of oxygen for its combustion, I conclude that the true expansion should be ⅓, or 3 volumes of gas should become 4, and then it will be found that ⅓ of the oxygen is joined to the hydrogen and ⅔ to the phosphorus, which accords with what appears to me the only correct view of the constitution of phosphoric acid, namely, 2 atoms of oxygen to 1 of phosphorus.

The action of oxymuriatic acid, whether free or combined, on phosphuretted hydrogen, is curious and interesting; in both cases it effects a complete and instantaneous combustion of both phosphorus and hydrogen; when the acid is put to in the state of gas, it not only burns the phosphuretted hydrogen, but any free hydrogen that may be present; but this has a limit: if the phosphuretted hydrogen be largely diluted (90 per cent.) with hydrogen, this last is wholly left; the reason seems to be, the phosphuretted hydrogen burns at a lower temperature; and hence probably it is, that liquid oxymuriate of lime burns the phosphuretted hydrogen, but not the hydrogen gas.

The quantity of oxygen necessary to saturate a given volume of phosphuretted hydrogen is easily found. Oxygen gas containing a known per centage of azotic gas, must be used in some excess, mixed with a due portion of the gas. After exploding the mixture, the loss must be observed, and then the remaining oxygen must be found by exploding it with hydrogen. Hence the true volume of oxygen spent by the first explosion, and that of the combustible gas are both determined. The due proportion of oxygen is so nearly 2 to 1, that I have not been able to determine on which side the truth lies. Dr. Thomson says that when phosphuretted hydrogen and oxygen are mixed, two volumes to one, a white smoke takes place, the volume of oxygen gradually disappears, and there remains behind a quantity of hydrogen exactly equal to the original volume of the phosphuretted hydrogen. I have observed nothing at all like this. A mixture of phosphuretted hydrogen and oxygen stood 24 hours without sensible diminution, and afterwards being exploded, 2 volumes of oxygen disappeared for 1 of phosphuretted hydrogen, the same as would have done at the moment of mixing. Perhaps the temperature may have some influence; mine was about 55°.

I have tried the minimum of oxygen that will consume or dissipate phosphuretted hydrogen gas. It may be exploded with about ¼ of its volume of oxygen, with the same phenomena as Davy observed of the hydrophosphoric gas. Phosphorus is thrown down and a volume of combustible gas is left about 10 per cent. greater than the original volume of phosphuretted hydrogen. This gas is nearly pure hydrogen. Hence the whole gas may be dissipated at 2 successive explosions, by rather less than an equal volume of oxygen. If phosphuretted hydrogen be exploded with an equal volume of oxygen, phosphorous acid, water and a little phosphoric acid are formed, and some hydrogen remains.

One of the most remarkable properties of phosphuretted hydrogen, is that announced by Dr. Thomson, namely, its combustion with nitrous gas by electricity; and the slow combustion by the same gas, which I have mentioned above is a fact still more difficult to explain. I tried the combustion of phosphuretted hydrogen by nitrous gas and electricity in 1810, but did not succeed. The reason was, the gas was not sufficiently pure. No phosphuretted hydrogen that is not 70 or 80 per cent. pure, can, I imagine, be exploded by nitrous gas; even the purest requires sometimes more than one spark, when mixed in the most favourable proportions; and I have known instances in which the mixture has exploded after electrification for a few minutes. An excess or defect of nitrous gas, occasions oxygen or hydrogen to be found in the residual gas, just as when we explode with oxygen. One volume of phosphuretted hydrogen requires, as nearly as I can find, 3½ of nitrous gas for mutual saturation. The azote developed amounts to 1¾ volumes or rather less, (due allowances in all such cases being made for that already existing in the two gases.)

The mutual action of nitrous gas and phosphuretted hydrogen without electricity exhibits one of the most singular phenomena we have in chemistry. Nitrous gas seems constantly to be decomposed, one part producing nitrous oxide and another part azote, even though an excess of nitrous gas remain undecomposed in the mixture, and both the phosphorus and hydrogen are completely burnt; but if the nitrous gas be deficient, then nitrous oxide, azote, and some of the phosphuretted hydrogen are found in the residue, and the rest of the phosphuretted hydrogen is completely burnt or converted into phosphoric acid and water; here appears no preference of phosphorus to hydrogen in this case, nor any partial combustion. From an attentive consideration of the results of several experiments, I am inclined to offer the following solution of this remarkable case: One atom of phosphuretted hydrogen attacks 5 of nitrous gas at the same instant; the atom of phosphorus takes 2 of oxygen, and gives the corresponding 2 of azote to the two of nitrous gas, and thus makes two atoms of nitrous oxide, while the hydrogen takes 1 of oxygen from the fifth atom and liberates the azote; thus 2 measures of nitrous oxide are formed along with 1 of azote; and they are generally found in the residue in that ratio. The azote does not seem to pass through the intermediate state of nitrous oxide; for, as soon as the nitrous gas ceases to exist, there is an end of the combustion.

It may be proper to advert more particularly to the hydrophosphoric gas of Davy. That this gas is the same as that we have been describing, can hardly admit of a doubt. Their near agreement in sp. gr., in their absorbability by water, in the quantity of oxygen requisite for their combustion, in their moderate expansion by burning with a minimum of oxygen and in their combustibility by oxymuriatic acid, are circumstances sufficient to warrant their identity. It is said that by heating potassium in this gas, one volume yields two of hydrogen; but it has not been found to yield two volumes by electricity, the more accurate criterion. Besides, both Davy and Gay Lussac find that potassium heated in the more common phosphuretted hydrogen expands it from 1 to 1⅓ or 1½ volume, which common electricity will not do; it is presumed therefore that the potassium in some way conduces to the production of a portion of the hydrogen. Spontaneous ignition or explosion is, I believe, no distinctive mark of variety in phosphuretted hydrogen; when this gas is produced, it is usually explosive from the uncombined phosphorus which it elevates; but the best and purest phosphuretted hydrogen loses the property wholly or partially by standing a while over water, though it loses no sensible part of its phosphorus.

It is commonly stated that phosphuretted hydrogen deposits phosphorus by long standing. This seems to be true; but the deposition is slower than I imagined. Seven years ago I set aside a bottle of impure phosphuretted hydrogen which I then labeled, 10 combustible take 14.6 oxygen; this bottle has not been preserved with special care to seclude the atmosphere; notwithstanding that, it is now such, that 10 combustible take 6.7 oxygen, and hence it still contains some genuine phosphuretted hydrogen.

2 and 3. Phosphurets of

carbone and sulphur.

See VOL. 1. page 464.

4. Phosphuret of lime.

This compound may be formed by subliming phosphorus in a glass tube containing small fragments of recently calcined lime, heated to a low red. The sublimed phosphorus coming into contact with the hot lime, the two unite with a vivid glow, and in due time mutual saturation is produced. The result is a dry, hard compound of a deep brown or reddish colour, which on cooling must be put into a bottle and well corked, if not intended for immediate use, as it soon changes by the action of atmospheric air and moisture. With this precaution, I have reason to think it may be kept unimpaired for years.

As far as I know, no experiments have been published relating to the proportion in which phosphorus and lime unite. M. Dulong, in a valuable paper on the combinations of phosphorus and oxygen, in the Memoires de la Société d’Arcueil, VOL. 3. (1817,) has given some account of his experiments on the earthy phosphurets; but it is to be regretted that he has given none on the proportions of their elements.

In order to ascertain the phosphorus, I put 10 grains of well preserved phosphuret of lime, into 1000 grains of liquid oxymuriate of lime, such that by previous trials I knew would impart 3.5 grains of oxygen; to this mixture a quantity of muriatic acid was put, sufficient to engage the lime; the phosphuretted hydrogen disengaged, was of course made to pass through the liquid as it was generated, and became oxidized, so as to lose its gaseous form; the surplus gas was prevented from escaping by an inclination of the bottle; it was 45 grain measures only, and of this 30 were found to be pure hydrogen, and the rest atmospheric air detached from the water; these 30 measures were the free hydrogen, which would have been mixed with the phosphuretted hydrogen, in the ordinary way. In due time, the whole of the phosphuret of lime was dissolved. The liquid was strongly acid, and manifested no smell of oxymuriatic acid, a proof that it was all decomposed. To this were added 70 more of the oxymuriate of lime before the smell of it was permanently developed. The liquid was next saturated with lime water, and the phosphate of lime carefully collected and dried; when heated to a low red it weighed 12 grains, and consisted, according to my estimate of this compound, of 6— grains of phosphoric acid and 6 + grains of lime. The 6— grains of acid contained 2.4 phosphorus and 3.5 of oxygen. It must be remembered that 10 grains of phosphuret yield about 500 measures of phosphuretted hydrogen, and these contain 650 measures of hydrogen, which last is also oxidized at the expence of the oxymuriatic acid; but then there is an equivalent of oxygen from the water, so that this does not influence the calculation for oxygen. There appears then to be only an excess of .24 grains of oxygen unaccounted for, (arising from the additional 70 of oxymuriate of lime), which is as little as can be expected in such an experiment. If the phosphorus amount to 24 per cent. we may reasonably infer that the remainder (76) is mostly lime, though I have not been able to detect above 60. Now if an atom of phosphorus weigh 9⅓ and one of lime 24, the due proportion of the protophosphuret of lime would be 28 phosphorus and 72 lime; but when the article is made for sale, it is more likely to find a defect than an excess of phosphorus.

According to Dulong, when the earthy phosphurets are decomposed by water, phosphuretted hydrogen and subphosphorous acid are formed. I believe this determination is right; for I find at most only ⅓ of the above proportion of phosphorus in the phosphuretted hydrogen yielded by 10 grains of the phosphuret of lime; the remaining ⅔ seem to rest in the liquid in combination with the oxygen and lime; that is, 1 atom of hydrogen combines with 1 of phosphorus, and 1 of oxygen with 2 of phosphorus. Notwithstanding this, the phosphoric acid produced from the residue by means of oxymuriate of lime, does not in general correspond to the above quantity. Perhaps this loss may be owing to the phosphorus carried over in mechanical suspension by the gas.

M. Dulong observes, that even the earthy subphosphites are very soluble; this did not appear to me to be the case with that of lime: 10 grains of phosphate of lime, that had been exposed for 20 minutes to the air, were put into a gas bottle filled with 400 grains of water; this was kept at nearly the boiling heat for an hour, when 725 grain measures of gas were produced, and some phosphorus was carried over with it into the receiving bottle and bason of water. The gas being analysed, was found to consist of 62 per cent. phosphuretted hydrogen, 33 hydrogen and 5 common air. The 400 grains of water in the gas bottle treated with oxymuriate of lime, and then with lime water, scarcely gave any appreciable quantity of phosphate of lime. The insoluble residue when dried yielded 9 grains. This dissolved in muriatic acid left a fraction of a grain of dirty yellow powder, which indicated some phosphorus; and the muriate of lime indicated about 6 grains of lime.

5. Phosphuret of barytes.

The combination of phosphorus and barytes may be effected in the same way as the foregoing, and the compound has the same appearance. According to Dulong, who has examined this phosphuret with particular attention, it gives out phosphuretted hydrogen when dropped into water, the same as that of lime. When the gas ceases to be given out, a powder remains completely insoluble in water, of a variable colour, yellow, grey or brown. It is not altered by the air; but it gives out a slight phosphoric flame when heated. Dilute nitric or muriatic acid, dissolves nearly the whole with a trace of phosphuretted hydrogen, and leaves only a few atoms of greenish yellow powder, soluble in oxymuriatic acid. The part dissolved by the acids being precipitated by ammonia, gives phosphate of barytes. From these facts he infers that the residue insoluble in water, consists of a small portion of phosphuret of barytes with excess of base, and phosphate of barytes. The water in which the phosphuret was decomposed, contains most of the barytes; carbonic acid produces a slight precipitate, and then leaves a neutral liquid containing the subphosphate of barytes, which appears to be a very soluble salt. Sulphuric acid throws down the barytes and leaves the subphosphorous acid in the liquid.

Nothing certain is determined from experiment respecting the proportion of phosphorus and barytes which combine; but from analogy it is probable that they combine atom to atom, or 68 parts barytes with 9 of phosphorus; or 100 parts of the compound contain 88 of barytes and 12 of phosphorus.

6. Phosphuret of strontites.

Phosphuret of strontites may be formed as the two preceding articles. It is in all respects similar to the phosphuret of barytes according to Dulong, and its properties therefore need not be particularized.

From analogy, I should apprehend, it must be constituted of 46 strontites and 9 phosphorus, or one atom of strontites to one of phosphorus; that is, 100 parts of phosphuret should contain 83 strontites and 17 phosphorus.

Combinations of the other earths and phosphorus have not yet been effected. Neither have the alkalies been combined with phosphorus; the hydrates of these as well as those of the earths, yield phosphuretted hydrogen when heated with phosphorus, and probably a phosphate or subphosphate of the base. M. Sementini of Rome is said to have succeeded in combining potash and phosphorus by means of alcohol. His experiments, however, appear to me too indefinite to warrant the conclusion. (See An. of Philos.—7. p. 280). The compounds of phosphorus with potassium and sodium are described in the sequel, amongst the metallic phosphurets.

7. Phosphuret of gold.

M. Pelletier heated together in a crucible, half an ounce of pure gold, one ounce of phosphoric glass and ⅛ of an ounce of powdered charcoal, the heat was raised sufficiently to fuse the gold. Phosphoric fumes arose, but the whole of the phosphorus was not dissipated. The gold remaining was whiter than natural, and brittle under the hammer. Exposed to a very high heat it lost ¹/₂₄ of its weight, and resumed the ordinary characters of gold.

The same chemist heated 100 grains of pure gold in filings to a bright red; he then projected small fragments of phosphorus amongst the gold successively till after it had entered into fusion. The gold preserved its colour, but became brittle under the hammer and granular in the fracture; it had increased 4 in weight.

Mr. Edmund Davy, by heating in a tube deprived of air, finely divided gold and phosphorus, effected a combination of them. It had a grey colour and metallic lustre. The heat of a spirit lamp was sufficient to decompose it. It contained about 14 per cent. of phosphorus. (Davy’s Chemistry, page 448—An. 1812).

Oberkampf and Thomson have successively observed the precipitation occasioned by water impregnated with phosphuretted hydrogen, in solutions of muriate of gold. The former of these has some interesting remarks on the phenomena. When a current of this gas is passed through a dilute solution of muriate of gold for a time, and then suddenly discontinued, the solution becomes brown and passes soon to a fine deep purple. A yellowish brown precipitate is obtained, which is metallic gold, and the liquid, now become yellow again, contains muriate of gold and phosphoric acid. The experiment may be continued with the like results. But if the liquid be saturated with gas before any precipitate is suffered to subside, a black powder is obtained which does not seem to contain any metallic gold, and the liquor ceases to have any colour. This black powder is the phosphuret of gold; exposed to heat it inflames and leaves metallic gold, but its elements are not separable by mechanical means. (An. de Chimie, 80—146, for 1811).

Water impregnated with the gas was found to have like effects as the gas itself. Whence Oberkampf concludes that as long as an excess of gold remains in solution, the phosphuretted hydrogen precipitates the metal only; but when the gas is in excess, the phosphorus leaves the hydrogen and unites with the precipitated gold.

I should rather suppose that the precipitation of the gold may be, in part at least, owing to the free hydrogen which we now know accompanies the phosphuretted hydrogen largely, in the manner in which this gas was formerly procured; however that may be, I find that water, impregnated with the purest phosphuretted hydrogen, has the property of precipitating the black phosphuret of gold from the muriate of that metal, in such manner as to effect complete mutual saturation, leaving nothing in the liquid but the muriatic acid. Let a solution containing a known quantity of gold be gradually dropped into water, containing a known quantity of phosphuretted hydrogen, as long as any black precipitate is formed. The point of saturation will be found when 60 parts by weight of gold have united to 9 of phosphorus, nearly; or when one atom of gold has united to one of phosphorus. Hence it may be concluded that 100 grains of the phosphuret of gold contain 13 or 14 of phosphorus, which agrees very nearly with the results of Mr. Edmund Davy abovementioned.

8. Phosphuret of platina.

M. Pelletier succeeded in combining platina with phosphorus by the same methods as with gold. By projecting phosphorus on grains of platina heated to a strong red, the latter acquired an increase of weight of 18 on the hundred; but this was probably an excess, as some vitreous phosphoric acid was found mixed with the mass.

In the Philos. Magazine, VOL. 40, Mr. E. Davy has related some experiments made with a view to combine platina and phosphorus; he effected it by heating platina and phosphorus together in an exhausted tube; the union commenced below a red heat and was attended with vivid ignition and flame. The compound was of a blueish grey colour and consisted of 82½ platina and 17½ phosphorus according to his estimate. Also by heating the ammonia-muriate of platina with ⅔ of its weight of phosphorus in a retort over mercury, muriatic gas was liberated, and muriate of ammonia and phosphorus were sublimed, but there remained at dull red heat an iron black or dark grey mass at the bottom, of the sp. gr. 5.28. It was estimated to consist of 70 platina and 30 phosphorus; but I doubt whether it could consist of these two elements only.

Phosphuretted hydrogen water scarcely has any effect on muriate of platina. After some time a very light flocculent matter appears, as Dr. Thomson has observed; but this seems to me to be nothing but a slight precipitation of phosphorus alone; I apprehend the gas unites with the platina, but the compound remains in solution somewhat in the same manner as platina and sulphuretted hydrogen. The platina may be precipitated from the clear liquid by muriate of tin, much the same in appearance as if no phosphuretted hydrogen were present.

9. Phosphuret of silver.

When pieces of phosphorus are dropped amongst silver heated to red in a crucible, the two unite and enter into fusion, according to Pelletier; when the metal is saturated with phosphorus the whole continues in a state of tranquil fusion; but being withdrawn from the fire, at the moment of congelation, a quantity of phosphorus becomes suddenly volatile and burns vividly, and the surface of the metal becomes uneven. The metal on being cooled, is found to have gained from 12 to 15 per cent.; and he apprehends that when fluid it contains 10 per cent. more, making in all 25 phosphorus to 100 silver.

The phosphuret of silver is white and crystalline, brittle under the hammer, but capable of being cut with a knife. By a strong heat the phosphorus is dissipated and leaves the silver pure.

Both Raymond and Thomson observe that phosphuretted hydrogen water precipitates silver from its solutions of a black colour. I find that a solution of sulphate of silver containing one grain of the metal, requires water containing 90 grain measures of phosphuretted hydrogen to saturate it; the whole of the silver falls readily and leaves nothing but the acid in the water. Now the weight of 90 measures of this gas is nearly ⅑ of a grain; hence the proportions of metal and phosphorus are as 10 to 1, which shows that they combine atom to atom, or 90 silver to 9⅓ phosphorus. This is somewhat less of phosphorus than is determined above by Pelletier.

10. Phosphuret of mercury.

M. Pelletier made several attempts to combine phosphorus and mercury. He seems to have succeeded best, by exposing mercury in an extreme state of division, to phosphorus under water in a moderate heat. The phosphuret is a black compound, which is resolved again into its elements by distillation.

When nitrate of mercury is treated with phosphuretted hydrogen water, a copious dark brown or black precipitate is instantly formed, as Raymond and Thomson have observed. This black precipitate, Raymond adds, soon becomes white and crystalline in passing from phosphuret to phosphate, by attracting oxygen.

I have found the black powder when dried in a moderate heat to abound in small shining globules, which have all the appearance of revived mercury. However this may be, I find that a certain weight of mercurial salt requires a certain portion of gas to saturate it, so as that the whole mercury shall be precipitated. One grain of mercury requires rather more than ¹/₁₈ of its weight or 50 grain measures of the gas for its saturation. This proves the combination to be the most simple, or atom to atom; that is, 167 mercury take 9⅓ phosphorus; or 100 mercury take 5½ phosphorus nearly.

11. Phosphuret of palladium.

When nitrate of palladium is dropped into phosphuretted hydrogen water, a copious black flocculent precipitate is immediately formed, which doubtless consists of palladium and phosphorus.

Into 800 grains of phosphuretted hydrogen water containing 20 grain measures of gas, were put by degrees, 22 grain measures of muriate of palladium (sp. gr. 1.01) containing .12 acid and .14 oxide, corresponding to .12+ metal; mutual saturation was produced, and a finely distinct black powder precipitated, leaving the water clear and colourless, which was found by lime water to contain .12 parts of a grain of muriatic acid. The black powder collected and dried, corresponded as nearly as could be determined in weight to the ingredients. Now 20 measures of gas would weigh .025 of a grain, of which .0025 would be hydrogen and .0225 phosphorus; whence we have .12+ metal joined to .0225 phosphorus or 50 to 9 nearly, indicating one atom of each. Hence 100 palladium would take 18 or 19 phosphorus.

12. Phosphuret of copper.

M. Pelletier combined copper and phosphorus by the same means as the preceding compounds. One hundred grains of copper united by heat with 15 of phosphorus; the fused mass when cooled was white and very hard. As part of the copper gets oxidized during the process he thinks it probable, with M. Sage, that copper may acquire 20 per cent. of phosphorus.

In the 3d VOL. of Memoirs of the Society of Arcueil, page 432, M. Dulong converts fine copper wire into phosphuret by heating it to a low red, and passing the vapour of phosphorus over it in hydrogen gas. In the sequel he observes that 10 grammes of phosphuret of copper contained 1.97 of phosphorus; that is, the copper was to the phosphorus as 8.03 ∶ 1.97, or as 100 ∶ 24.5. This exceeds much Pelletier’s result, and is, I think, too high. For, he found that the above phosphuret converted into phosphate of copper by nitric acid yielded 14.44 grammes. Now supposing the atom of phosphorus to weigh 9⅓, that of phosphoric acid 23⅓, and that of the black oxide of copper 70, we have an atom of phosphate of copper = 93⅓: and if 93⅓ ∶ 9⅓ ∷ 14.44 ∶ 1.444, for the phosphorus in 10 grammes; and hence the copper would be 8.556: this would give 100 copper to 17 phosphorus nearly, which would accord well with Pelletier’s determination, and very nearly agree with the theoretic result of 100 copper to 16⅔ phosphorus.

Both Raymond and Thomson remark that phosphuretted hydrogen water produces a black or dark brown precipitate in sulphate of copper. I have not found any precipitate from any of the salts of copper by the same means. But if the blue hydrate be first precipitated by lime water, and then the phosphuretted hydrogen water admitted, the hydrate is immediately converted into a dark olive, which in all probability is a phosphuret of copper. From some experiments I am inclined to believe that this compound is the deutophosphuret, or two atoms of phosphorus to one of copper; and hence the copper is to the phosphorus as 100 ∶ 33⅓.

13. Phosphuret of iron.

M. Pelletier formed a phosphuret of iron by both the methods above described for gold. He describes the phosphuret as very hard, of a white colour, striated and magnetic. He estimates, with some uncertainty, that 100 iron may combine with 20 phosphorus.

Berzelius produced a phosphuret of iron by reducing the phosphate of the metal by charcoal and heat. (An. de Chimie, July 1816). He describes it as having the colour of iron, brittle and slightly acted upon by the magnet. By his analysis it was constituted of 100 iron and 30 phosphorus. The true proportion probably would be one atom to one, or 25 iron to 9⅓ phosphorus; that is, 100 iron to 37 phosphorus.

Both Raymond and Thomson found that sulphate of iron yields no precipitate by phosphuretted hydrogen water; and I may add, that the precipitated oxide or hydrate is also unaffected by the same.

14. Phosphuret of nickel.

By projecting phosphorus amongst red hot nickel, Pelletier united 20 parts of the former to 100 of the latter. A part of the combined phosphorus, he observes, flies off on cooling, so that the above proportion may perhaps be too low. Theoretically one atom of nickel should combine with one of phosphorus; that is, 26 with 9⅓, or 100 with 36.

I find that neither the nitrate of nickel nor the hydrate are affected by phosphuretted hydrogen water.

15. Phosphuret of tin.

Margraff was the first who combined phosphorus and tin by fusing the metal along with fusible salt from urine (phosphate of ammonia). Pelletier succeeded also in this way, as well as by the direct one of projecting phosphorus into melted tin. The compound was of a white colour; it gained 12 per cent. of weight; but as part of the tin was oxidized and adhered to the crucible in form of glass, he conjectures that tin would take from 15 to 20 per cent. of phosphorus. The atom of tin being 52, and that of phosphorus 9⅓, the due proportion would be 100 tin to 18 phosphorus.

Phosphuretted hydrogen water does not seem to precipitate tin from solutions, nor yet to act upon the precipitated oxide.

16. Phosphuret of lead.

Lead combines with phosphorus by the same methods as tin; but it is difficult to ascertain the proportions, according to Pelletier, from the oxidation and vitrification of part of the lead. Muriate of lead distilled with fusible salt of urine, also yielded phosphuret of lead. He conjectures the increase by phosphorus to be 12 or 15 per cent.; but by theory it should only be 10 or 11 per cent.

Raymond says that the nitrate of lead is decomposed by phosphuretted hydrogen water, but with less force than salts of silver and mercury; and that a phosphuret of lead is formed, of which he gives no character, except that it becomes in time a phosphate. Thomson says a slight white powder is formed by the mixture. This was the case with me; but I suspected that the white powder was merely a little sulphate of lead, arising from the impurity of the (rain) water; and this was found to be the fact; for the milkiness was just the same with like water unimpregnated with the gas. Besides, after the phosphuretted hydrogen water has been saturated with nitrate of lead till no more effect is produced, still the water retains its peculiar smell, and a copious black precipitate is instantly produced by nitrate of silver or mercury. It appears then that phosphuret of lead cannot be formed this way. Neither does phosphuretted hydrogen water seem to have any effect on the recently precipitated oxide of lead.

17. Phosphuret of zinc.

Both zinc and its oxide seem to combine with phosphorus, according to Pelletier; but the proportions were not ascertained. By theory, zinc should take 32 per cent. of phosphorus.

18. Phosphuret of potassium.

Some account was given by Davy, of the combination of potassium and phosphorus in essays from 1807 to 1810; and by Gay Lussac and Thenard in others from 1808 to 1811. According to Davy, when potassium and phosphorus are heated together, they combine in one uniform ratio of 8 to 3 nearly; and the compound, when acted upon by muriatic acid, gives out from .8 to 1 cubic inch of phosphuretted hydrogen gas, resulting from one grain of the former and ⅜ of a grain of the latter substances combined. Also be observed that half a grain of potassium decomposed nearly 3 cubic inches of phosphuretted hydrogen, and set free more than 4 cubic inches of hydrogen; the phosphuret seemed to be of the same kind as the former, or that by direct combination of the two elements.

Gay Lussac and Thenard combined the elements by heat; the potassium is scarcely fused till the phosphuret is formed. The excess of phosphorus sublimes, and the phosphuret is always of a chocolate colour; the proportions were not ascertained. By treating this phosphuret with warm water, a quantity of phosphuretted hydrogen was uniformly given out, about 40 per cent. more than the hydrogen which would have been yielded by the potassium alone in water. But if the phosphuret was treated with dilute acid instead of water, then less gas was given out than otherwise; and the stronger the acid the less gas, so as sometimes to reduce the gas in volume to that yielded by potassium alone. They also found, as Davy had done, that potassium heated in phosphuretted hydrogen decomposed it, uniting with the phosphorus and producing the same compound as in the direct way.

The results of Davy and the French chemists appear to be discordant; but I apprehend they may be reconciled. It appears probable from both, that the phosphuret of potassium must be a compound of one atom of each, or 35 potassium and 9⅓ phosphorus; that is, 100 potassium and 27 phosphorus nearly. Now in Davy’s method of treating the compound with acid, it is most probable that the atom of potassium takes one of oxygen to form potash, and the atom of phosphorus takes one of hydrogen to form one of phosphuretted hydrogen; but 3 volumes of pure phosphuretted hydrogen contain 4 volumes of hydrogen, (see page 178); and Davy obtained nearly ¾ of the volume of gas which the potassium alone would have produced, which therefore accounts for the fact as stated by him.

On the other hand, the French chemists by treating the phosphuret with hot water, probably determined the resolution in this way: the potassium resolved the water into oxygen and hydrogen the last of which was liberated in a free state, and of course produced the usual volume; the phosphorus also resolved the water into oxygen and hydrogen, one half of it taking the oxygen to form phosphorous acid, and the other half taking the hydrogen to form phosphuretted hydrogen, which of course would produce phosphuretted hydrogen amounting to ⅜ of the volume of free hydrogen or 38 per cent. nearly, which would make up the volume of gas to 138, or nearly 140, as observed by them. It is not unlikely that 2 or 3 per cent. of hydrogen might be added by the further decomposition of water by the phosphorous acid, in order to make it into phosphoric acid.

19. Phosphuret of sodium.

No particular experiments having been detailed of this compound, we must infer it is similar to the last mentioned, and consists of one atom of sodium, 21, and one atom of phosphorus, 9⅓; that is, 100 sodium and 44 phosphorus nearly.

20. Phosphuret of bismuth.

If we may judge from M. Pelletier’s experiments, bismuth has but a weak affinity for phosphorus. By projecting portions of phosphorus amongst melted bismuth, he succeeded in uniting some of it to the metal; he estimates the quantity at 4 per cent.; whereas by theory it ought to be 15 per cent. supposing them to unite atom to atom.

I do not find that the salts or oxide of bismuth are materially affected by phosphuretted hydrogen water.

21. Phosphuret of antimony.

Phosphorus may be combined with antimony, according to Pelletier, by the same means as with the other metals. The phosphuret has a white, metallic appearance and lamellar fracture. The ratio of the elements was not determined. By theory supposing one atom to unite with one, it would be 40 to 9⅓, or 100 antimony to 23 phosphorus nearly.

Phosphuretted hydrogen water seems to have no effect on the salts or oxide of antimony.

22. Phosphuret of arsenic.

From the experiments of Margraff and Pelletier, it seems probable that phosphorus unites both with arsenic and its oxide. By distilling a mixture of equal parts of arsenic and phosphorus in a carefully regulated heat, Pelletier obtained a residuum of a black shining substance, containing a good proportion of phosphorus. The same was obtained in the humid way, by keeping phosphorus in fusion on arsenic under water for some time. The phosphuretted oxide may be obtained by distilling phosphorus and the white oxide of arsenic together, the phosphuretted oxide sublimes mixed with arsenic and phosphorus in a separate state. It is of a red colour. The proportions in neither case were ascertained. It is probable that the compounds are of the most simple kind, or one atom to one; in that case we shall have 21 arsenic and 9⅓ phosphorus, or 100 arsenic and 44 phosphorus for phosphuret of arsenic; and 28 oxide and 9⅓ phosphorus, or 100 oxide and 33 phosphorus for phosphuretted oxide.

No precipitation is occasioned by phosphuretted hydrogen water in solutions of arsenic.

23. Phosphuret of cobalt.

Cobalt unites with phosphorus in the direct way as well as by being heated with phosphoric glass. The colour of the compound is a blueish white; it is brittle and crystalline in the fracture. The metal acquires 7 per cent.; this is below the theoretic quantity, which is 25 per cent. if the atom of cobalt be 37.

Solutions of cobalt give no precipitate by phosphuretted hydrogen water.

24. Phosphuret of manganese.

This compound may be formed like the preceding ones. It is of a white colour, brittle and of a granular texture. It is not liable to be altered by the air like the pure metal. The proportions of the compound Pelletier did not determine. Reasoning from theory, it should consist of 25 metal and 9⅓ phosphorus; or 100 metal and 37 phosphorus.

The salts and oxide of manganese are not sensibly affected by phosphuretted hydrogen water.

The combinations of the remaining metals with phosphorus can scarcely be said to have been investigated.

SECTION 16.

CARBURETS.

On the supposition that metals combine with charcoal, the appropriate names for the compounds would be carburets of the respective metals. This combination, if it exist at all, seems very rare, that with iron being the only one generally acknowledged. No combinations of carbone with the earths and alkalies, have, as far as I know, been noticed; and those with the elements oxygen, hydrogen, sulphur and phosphorus have been described in the former volume. Since that was printed an ingenious experimental essay on the “Sulphuret of carbon or alcohol of sulphur,” has been published by Berzelius and Dr. Marcet. Some account of this compound, under the name carburetted sulphur, has been given (VOL. 1. page 462); but the additional information is of sufficient importance to require notice here. The pure liquid is of sp. gr. 1.272; and the elasticity of its vapour at 66° is equal to 10.76 inches. It burns with a blue flame and sulphureous odour, without sensibly depositing water on cold glass exposed to the fumes. It has an acrid, pungent taste, and a nauseous smell, differing from sulphuretted hydrogen. By various experiments it was found to consist of sulphur and carbone in the ratio of 85 to 15 nearly; that is, 2 atoms of sulphur to 1 of carbone. From other experiments it did not appear to contain any hydrogen.

From some experiments I made in June 1818, on the combustion of the vapour of carburet of sulphur in oxygen gas, I was led to suspect at least, that an atom of hydrogen attaches to the two of sulphur and one of carbone in its constitution. But not having an opportunity to pursue the subject, I merely make the observation for future experience to determine upon the question.

1. Carburets of iron.

There are three distinct substances which are now commonly believed to be constituted of carbone and iron, known by the names of Plumbago, or black lead, Cast Iron and Steel.

Plumbago is a natural production, found in greatest perfection in the Borrowdale mine, near Keswick, Cumberland. It is chiefly used in making pencils.—It seems to be constituted of carbone and iron by the concurrent experience of all who have examined it: but the proportions are not uniform, some having found 10 and others only 5 per cent. of iron in it. From this circumstance it would seem doubtful whether iron is an essential element. As carbone is known to be exhibited in various forms of aggregation, it is not improbable that plumbago may be one of those forms; it is evidently not a mere mixture of common charcoal and iron, or its oxide.

Cast iron or crude iron is the metal when first extracted from the ore; it usually contains carbone, oxygen, phosphorus and silica, in small proportions, with perhaps other earths occasionally. It cannot be considered as having these elements united in definite proportions; for they vary much, and probably give to crude iron its several modifications. Cast iron contains about 80 per cent. of its weight of iron in a state capable of solution in dilute sulphuric acid, and yielding a corresponding quantity of hydrogen gas. The residue, in a specimen I examined, was nearly as magnetic as iron itself. When treated with boiling muriatic acid, the insoluble part was reduced to 2½ per cent. upon the original weight of the iron, and some hydrogen gas given out. It was then about as magnetic as the common black oxide of iron; when heated it assumed a glowing red and lost nearly ½ grain; it was still magnetic, and boiling muriatic acid extracted more iron from it.

The hydrogen gas from dilute sulphuric acid and cast iron contains no carbonic acid in my experience; neither does it yield any when exploded with pure oxygen gas.

The small residuum after treating cast iron with acids was found by Bergman and others to resemble plumbago, being constituted chiefly of carbone and iron.

From the above it would seem that cast iron consists chiefly of pure iron, with the addition of very small proportions of oxygen and carbone; the oxygen may be about 1 per cent. and the carbone about 2. These proportions, though sufficient to modify the properties of iron to a certain extent, can scarcely be considered as constituting cast iron a homogeneous mass.

Steel. This most important modification of iron has engaged the attention of many chemists and metallurgists. It may be procured, but not equally pure, by different methods. One is to keep the cast iron for a considerable time in fusion and in a very high degree of heat; whilst its surface is covered with melted scoriæ, so as to preclude the contact of the atmosphere with the iron. This, it is conceived, gives time for the carbone and oxygen to combine and escape in the form of carbonic acid. This steel is of inferior purity.

Steel of cementation is made by stratifying bars of pure iron with charcoal powder in large earthen crucibles, carefully closed up with clay. These are exposed to a high degree of heat in a furnace for 8 or 10 days. This is called blistered steel, from the appearance of blisters on its surface.

Cast steel is made from blistered steel by breaking the bars and putting them into a large crucible with pounded glass and charcoal. The crucible is closed with a lid of the same ware and placed in an air furnace. When the fusion is complete the metal is cast into ingots. This is the most valuable and probably the purest steel.

When steel is heated red and plunged into cold water, it is hardened; that is, it becomes much harder than iron or than steel without this operation. Hardened steel is brittle, and cannot be extended by the hammer or corroded by a file till it is again softened by being heated and then gradually cooled.

One of the most remarkable properties of hardened steel is that of being tempered, as it is called; by which it is adapted to the different purposes of the manufacturing artists. Tempering consists in heating the hardened steel till it acquires a straw colour for edge tools, a blue colour for watch springs, and elastic articles in general; &c. &c.

Hardened steel is qualified to acquire magnetism, and to retain it so as to become a permanent magnet. This power of retaining magnetism distinguishes steel from pure iron.

From the above account of steel, it is evident there is an essential difference between it and pure iron. That difference consists, according to the common opinion, in steel being a carburet of iron, or carbone and iron united. The fact of the union of carbone and iron in the formation of steel does not seem to me satisfactorily proved. Mr. Collier asserts that iron gains about ¹/₁₈₀th of its weight by being converted into steel.[18] But Mr. Mushet found that though steel gains weight upon the iron when copiously imbedded in charcoal, yet it loses weight if the charcoal is only ¹/₉₀ or ¹/₁₀₀ of the weight of the iron.[19] The same ingenious gentleman seems to estimate the carbone in cast steel, from synthetic experiments, to be ¹/₁₀₀th of its weight.

From analytic experiments, however, there does not appear reason to believe that steel contains so much, if any charcoal. Pure steel dissolved in dilute sulphuric acid gives hydrogen gas containing no carbonic acid nor oxide, neither is there any appreciable residuum of any kind in general.

On considering all the circumstances, I am inclined to believe, that the properties which distinguish steel from iron are rather owing to a peculiar crystallization or arrangement of the ultimate particles of iron, than to their combination with carbone or any other substance. In all cases where steel is formed, the mass is brought into a liquid form, or nearly approaching to it, a circumstance which allows the particles to be subject to the law of crystallization. We see that great change is made in steel by the mere tempering of it, which cannot be ascribed to the loss or gain of any substance, but to some modification of the internal arrangement of its particles. Why then may not its differences from iron be ascribed to the same cause? It is allowed that steel, by being repeatedly heated and hammered, becomes iron: that is, it should seem, the change of figure disturbs the regular arrangement of the particles. And it may be further observed, in corroboration of the opinion that cast iron is capable of being made permanently magnetic, from its having been in fusion more probably than from its near approximation to steel in its component parts. The most powerful artificial magnets, after being forged of steel, are said to undergo the operation of steelifying again, before they are hardened finally to receive the magnetic virtue.

SECTION 17.

METALLIC ALLOYS.

When two or more metals of different specific gravities are melted together and intimately mixed, they frequently enter into chemical union and form a new compound, called an alloy of the metals. These alloys often possess important properties which their constituents singly do not, and hence become valuable acquisitions to the arts. The metals thus combined may be fused together in any proportion; but if one of them greatly exceed the other in specific gravity, their intimate union is sometimes rendered difficult and even impracticable, partly from the weak affinity and partly from the gravitating principle causing the metal of least specific gravity to arise to the surface.

Notwithstanding this union of metals in seemingly indefinite proportions, there are only a few proportions in which the alloys possess peculiar excellences so as to entitle them to the attention of artists. These proportions have in many instances been discovered by experience; and it only remains for theory to point out the reason for such proportions, and to suggest other proportions which may bid fair to possess desirable qualities, and thereby diminish the unsuccessful attempts for improvement in these combinations.

That the metals thus alloyed constitute true chemical compounds and not merely mechanical mixtures, may be inferred from the change made in their primary qualities; such as

1. Tenacity, hardness, &c. Some alloys are much superior to their ingredients in tenacity and hardness, whilst others affect a kind of medium between them. This last is often the case too in regard to ductility and malleability.

2. Fusibility. Several alloys fuse at temperatures intermediate between the fusing temperatures of their ingredients, but mostly lower than the mean; there are others which fuse below the temperature of the lowest, and few if any require a temperature above the mean for their fusion.

3. Colour. In many cases the colour of alloys is such as would be produced by the mixture of the colours of the metals; but in others, remarkably different; for instance, the alloys of copper and zinc,—forming the various kinds of brass.

4. Specific gravity. This is not always what might be inferred from a mixture of the two ingredients. Sometimes it is greater and other times less; but this is not a decisive mark of chemical union, as the same metal varies in specific gravity, by hammering, rolling, tempering, &c. very considerably. Besides, it is more than probable that the differences said to have been observed, have in some instances arisen from inaccurate experiments; as it is a delicate operation to find the specific gravity of small pieces of metal with sufficient precision for comparisons of this kind.

Many of the simple metals, when fused and exposed to the air for some time, without a covering of charcoal, or some similar principle, acquire less or more of oxygen, and retain it even in a fluid state, as is proved from Mr. Lucas’s interesting communication in the 3d Vol. of the Manchester Society’s Memoirs (new series). Hence by frequent fusions of the same metal its quality becomes impaired in regard to tenuity and other properties.

This is more eminently the case with regard to alloys. Thus, zinc at the temperature in which brass melts is combustible; and hence a portion of it escapes by combustion. Hence the proportions of brass are changed less or more at each fusion, unless fresh zinc be added. The same observation applies to alloys of copper and tin with regard to the tin. The mixtures of lead, tin, bismuth and other soft and easily fused metals, are still more remarkable in this respect. They should be fused under a cover of oil or tallow in order to keep them of the same proportions; otherwise, some of them, particularly the tin, is liable to great oxidation, and no two successive fusions will present the same alloy. Hence in some degree the use of fluxes in metallurgy which serve to cover the surface of the metals and prevent oxidation from the atmosphere.

When an alloy is made, it seldom happens that the metal is perfect and compact the first fusion; it is more or less porous, especially when the two metals fuse at very different temperatures. By a second fusion, which usually takes place at a much lower temperature than that requisite for the first, the metal becomes compact and free from pores. This is particularly the case with speculum metal; and I have little doubt it is so with regard to many other alloys.

Alloys of Gold with other Metals.

Gold unites with many of the metals by heat, and forms various alloys, on which it may be proper to make a few remarks.

1. Gold with platina. Platina in a small proportion changes the colour of gold towards white. 1 part to 20 gold makes it much paler. 1 to 11 gives it the colour of tarnished silver. 1 part with 4 of gold has much the appearance of platina. The colour of gold does not predominate till it becomes ⁸/₉ of the alloy. The alloy of 1 platina and 11 gold is very ductile, and elastic when hammered. Lewis. Klaproth. Vauquelin.

2. Gold with silver. These two metals may be combined in almost any proportion by fusion and proper treatment. Homberg found that when equal parts of gold and silver are kept in fusion for a quarter of an hour and then cooled, there were two masses, the uppermost pure silver, the undermost an alloy of 5 parts gold and 1 silver. 1 part silver to 20 gold produces a sensible whiteness in the alloy. 2 parts gold and 1 of silver are stated to form the alloy of greatest hardness; this will consist of 3 atoms of gold to 1 of silver.

3. Gold with mercury. See amalgams.

4. Gold with copper. Gold and copper form an alloy by fusion together. 11 parts gold and 1 copper form the alloy used for gold coin. The copper heightens the colour of the gold, and makes it harder and less liable to wear. The current gold coin, however, usually contains both silver and copper, but the weight of both does not much exceed one twelfth of the whole. According to Muschenbroeck the maximum of hardness is when 7 parts of gold and 1 part of copper are united. This corresponds nearly to 6 atoms of gold and 1 of copper, the atom of gold being estimated at 66 and that of copper at 56.

Other alloys of gold besides the above standard is that for watch cases, which must contain at least ¾ pure gold. Watch chains, and trinkets, are usually made of inferior alloy, called jewellers gold, which is under no control. It rarely contains less than 30 per cent. of pure gold.

5. Gold with iron. Gold and iron may be united by fusion in various proportions. 11 parts gold and 1 iron form a ductile alloy which may be rolled and stamped into coin. Its specific gravity is 16.885. The colour is a pale yellowish gray approaching to white. The alloy is harder than gold. When the iron is three or four times the weight of gold, the alloy has the colour of silver. This last compound is constituted of 1 atom of gold and 8 of iron nearly. Lewis. Hatchett.

6. Gold with nickel. Mr. Hatchett fused 11 parts gold and 1 nickel together, and obtained a brittle alloy of the colour of fine brass.

7. Gold with tin. Gold combines with tin and forms a brittle alloy. 10 parts gold and 1 tin form a pale alloy and less ductile than gold. One fiftieth of tin does not materially injure the ductility. Heat, up to a visible red, does not impair the alloy; but beyond that the tin fuses and the alloy falls to pieces. Hatchett.

8. Gold with lead. The effect of uniting even a very small proportion of lead to gold is remarkable. When the alloy contains ¹/₂₀₀₀ part of lead, it is brittle like glass. The vapour of fused lead in close vessels is sufficient to injure gold. ibid.

9. Gold and zinc. These two metals combine in almost any proportion. When 11 parts gold and 1 zinc are alloyed, the compound is of a pale greenish yellow like brass, and very brittle. Equal parts of these metals form a very hard, white alloy, susceptible of a fine polish. ibid. & Hellot.

10. Gold and bismuth. Gold unites with bismuth, but the colour is injured and the ductility of the alloy destroyed by a very small portion of the latter metal, the same as with lead. ibid.

11. Gold and antimony. These metals combine and produce a brittle alloy, much of the same kind as those with bismuth and lead. ibid.

12. Gold and arsenic. There seems a considerable affinity between gold and arsenic, but the volatility of arsenic in the fusing temperature of gold renders it difficult to bring them into contact. A very small proportion of arsenic makes the alloy brittle, and this property increases with the arsenic. Hatchett.

13. Gold with cobalt. These unite and form a brittle alloy, even when the cobalt only makes ¹/₆₀ of the compound. ibid.

14. Gold and manganese. Gold and manganese may be united, and the alloy is very hard and less fusible than gold. One alloy was found to consist of 7 or 8 parts of gold and 1 of manganese. ibid.

Alloys of Platina with other Metals.

1. Platina and silver. It does not appear very clear that these two metals combine by fusion; at least if they do, the difference in their specific gravities is sufficient to overcome their affinity.

2. Platina and mercury. See amalgams.

3. Platina and copper. These two metals unite with difficulty by a strong heat and form a malleable alloy. This alloy has been preferred for specula for telescopes, as it is hard, polishes well, and is not liable to tarnish. Lewis.

4. Platina and iron. Platina and soft or pure iron do not seem to be easily combined by heat, by reason of the infusibility of iron. But it combines with cast iron and steel by heat. The alloy is very hard, and in some decree ductile when the iron forms ¾ of the alloy. ibid.

5. Platina and tin. Equal parts of platina and tin unite by fusion, and form a dark coloured brittle alloy. But when the platina falls short ⁷/₉ of the alloy, the ductility and whiteness proportionally increase. ibid.

6. Platina and lead. These two metals may be combined in various proportions by heat; but the compounds are not stable, part of the platina falling down, when the alloy is subsequently melted. ibid.

7. Platina and zinc. Platina may be combined with zinc, by being exposed to the fumes of the metal as reduced from its ore. Three parts of platina become four of alloy. It is hard, brittle, of a blueish white colour, and easily fusible. ibid.

8. Platina and bismuth. Platina and bismuth combine readily in a high temperature in almost any proportions. The alloys are brittle. ibid.

9. Platina and antimony. Platina easily combines with antimony by heat. The alloy is brittle. ibid.

10. Platina and arsenic. When white oxide of arsenic is projected upon strongly heated platina, an imperfect union takes place with a partial fusion of the mass; it is brittle, of a greyish colour and a loose granulated texture. Lewis.

Alloys of Silver with other Metals.

1. Silver with mercury. See amalgams.

2. Silver with copper. Silver and copper are easily alloyed in any proportion by fusion. The compound is harder than silver, and retains its white colour when the copper is half of the alloy or more.—The silver coin is a compound of 12⅓ silver and 1 copper, which nearly corresponds to 8 atoms of silver and 1 of copper. The hardest alloy is said to be when 5 silver unite to 1 copper; that is, 3 atoms of silver and 1 of copper.

3. Silver with iron. The alloys of silver and iron have not been very minutely examined. The two metals are said to unite by fusion, but the iron still retains its magnetism. The alloy is of a white colour, hard and ductile. When kept in fusion for some time the two metals separate, but not entirely. These circumstances shew the affinity between silver and iron to be weak.

4. Silver with tin. Silver and tin form a hard brittle alloy, which is of little if any use. The modifications arising from various proportions have not been particularly investigated.

5. Silver and lead. Silver and lead unite in any proportion and form a brittle alloy of a lead colour. The union is not very intimate; for when urged by heat the lead parts from the silver, as in the process of cupellation.

6. Silver and zinc. These two unite and form a brittle alloy of a blueish white colour. The proportions have not been particularly noticed.

7. Silver and bismuth. Silver and bismuth readily unite by heat. The alloy is brittle and its colour inclines to that of bismuth.

8. Silver and antimony. These metals unite by fusion and form a brittle alloy, which does not seem possessed of any remarkable properties.

9. Silver and arsenic. These two metals unite according to Bergman, the fused silver taking up ¹/₁₄ of its weight of arsenic; the alloy corresponds nearly to 3 atoms silver and 1 arsenic. It is brittle and of a yellowish colour.

Alloys of Mercury and other Metals: Amalgams.

The alloys of Mercury with the various metals have been commonly denominated amalgams.

1. Mercury and gold. Gold amalgamates pretty easily with mercury and forms an alloy much used in gilding metals. For this purpose six parts of mercury may be heated nearly to the ebullition of the liquid, and one part of pure gold in thin plates may be gradually added. In a few minutes the whole becomes one fluid mass of a yellowish white colour. It is constituted of 1 atom of gold and 2 of mercury. By squeezing it through leather one half of the mercury is separated nearly pure, and the other remains combined with the gold, and forms a soft white mass, consisting of 1 part gold and 2½ mercury nearly, which is the alloy of 1 atom to 1, and may be subsequently used for gilding. A ready way of making this amalgam I find is to put 3 parts of gold, precipitated by green sulphate of iron, to 8½ or 9 parts of mercury; by a few minutes trituration the whole becomes a fine crystalline amalgam.—When this amalgam of gold is exposed to a heat just below red, the mercury sublimes and leaves the gold; hence its use in gilding.

2. Mercury and platina. These two metals may be combined, but not very easily, as little affinity seems to exist betwixt them. This is manifest from the circumstance that platina wire may be long immersed in mercury without any sensible effect. An union may be produced by immersing thin platina foil into boiling mercury for some time; also by triturating the ammonio-muriate of platina with mercury and exposing it to a due heat. The proportions have not been determined.

3. Mercury and silver. Silver and mercury have a considerable affinity and are easily combined by putting lamina of silver into heated mercury and agitating the mixture. When 1 part silver and 2 mercury are mixed as above, a fluid mass is obtained which being heated to the temperature of boiling mercury, a little mercury evaporates and the remainder crystallizes into a soft white mass, which in time grows hard and brittle. A higher heat than boiling mercury expels the mercury. Hence this amalgam may be used for giving a thin coating of silver to the surface of metals, like that of gold. The compound is evidently one atom of silver (90) with one of mercury (167).

4. Mercury and copper. I have made several unsuccessful attempts to combine mercury and copper.

When a plate of copper is kept immersed in mercury for some time, the mercury adheres to its surface in a small degree and is not easily rubbed off; the plate is rendered brittle by it and the fracture has a brilliant mercurial appearance; but a low red heat expels the mercury and the copper resumes its colour and tenacity, with scarcely any loss of weight, being only about 5½ per cent. in two or three trials.

Recently precipitated copper in powder, dried and triturated with mercury, produced no union. Neither did Dutch-leaf (which is copper with a very little zinc) unite with mercury by trituration. Mercury precipitated from deutonitrate by a plate of copper gave pure running liquid. The plate of copper appeared as if it had been immersed in mercury, was brittle with a shining fracture, but recovered its colour and texture by heat, and lost scarcely any weight.

The method recommended by Boyle was tried: 2½ parts of crystallized verdigris, 2 parts of mercury and 1 of common salt, were triturated together till the mercury disappeared, the powder was then digested awhile with vinegar over a fire and frequently stirred. The mass was then put on a filter and dried. It contained a little fluid mercury, but was chiefly composed of acetate of copper and oxide or muriate of mercury. The liquid contained acetate of copper and muriate of soda.

From the above it is manifest that mercury has some chemical action upon copper; but it has not yet been found, I apprehend, that the two metals unite so as to form a proper amalgam.

5. Mercury and iron. These two metals have little if any affinity for each other. I do not know that any chemical combination of them has ever been formed.

6. Mercury and tin. These two metals readily combine, especially if assisted by heat. I heated 52 parts of tin and 167 of mercury together, that is, 1 atom of each, till they united in a fluid mass. The amalgam crystallized in about 180°. By hard pressure in the hand nearly 50 parts of fluid mercury were separated from the amalgam when cool, containing in appearance very little tin. After this an amalgam was formed of 104 parts of tin and 167 mercury (2 atoms tin to 1 mercury); this congealed about 230°, and remained a hard, dry, crystalline substance, agreeing in appearance with that which adheres to mirrors. For the purpose of silvering mirrors however much more mercury is employed than is indicated by the above proportion; but after the glass is slid upon the tinfoil previously covered with mercury, a great pressure is applied, which expels the superfluous mercury nearly in a state of purity.

7. Mercury and lead. To 90 parts of lead I put 167 of mercury (1 atom of each); they united in a moderate heat and crystallized in about 180°. In a few days the mercury partly separated from the amalgam, and 56 parts were squeezed out, the whole was then put together with 90 parts more of lead (now 2 atoms lead to 1 mercury), and fused together; the amalgam crystallized in about 200°, and remained in a solid uniform mass.

8. Mercury and zinc. When 29 parts zinc and 167 mercury (1 atom to 1) are heated together, they combine and form an amalgam which crystallizes about 200°. A little of the mercury may be squeezed out when cold. By putting 29 parts more of zinc (2 atoms to 1) we obtain an amalgam which fuses considerably above 200°, and when cooled becomes a permanent hard crystalline mass.

9. Mercury and bismuth. When 62 parts bismuth are fused with 167 mercury (1 atom to 1), the compound remains fluid at common temperature, but crystallizes partially by standing; about ⅓ of the weight may be poured off like fluid mercury. If we put 62 bismuth more to the whole (so as to be 2 atoms to 1), the fluid amalgam crystallizes about 150 or 180°: the mass is soft however and by pressure one may squeeze out about 20 per cent. of a fluid amalgam. If we put 62 more bismuth (so as to be 3 atoms to 1), then the compound crystallizes between 200 and 300° into a darkish coloured granular soft mass which continues without any change. Higher than this of bismuth I have not examined.

10. Mercury and antimony. Antimony is said to form a feeble union with mercury, which is soon loosened by time. I made several unsuccessful trials to combine these two metals, which it seems unnecessary to detail, as the compound when formed is no ways interesting.

11. Mercury and arsenic. On the authority of Lewis an amalgam of mercury and arsenic may be made by keeping them over the fire for some time and constantly agitating the mixture. It is grey-coloured, and composed of 5 parts of mercury and 1 of arsenic.

Most of the other metals are incapable, as far as is known, of combination with mercury, excepting potassium and sodium considered as metals, which combine with mercury; but these alloys are of little interest, and the proportions have not been particularly investigated.

Triple, quadruple, &c. Amalgams.

Besides those amalgams which are formed of mercury and each single metal, there are others formed of mercury and alloys of two or more metals, which in some instances possess properties differing essentially from mere mixtures.

1. Mercury with bismuth and lead. When the amalgam formed of 2 atoms bismuth and 1 of mercury is mixed with that formed by 1 atom of lead and 1 of mercury, in such proportion that the mercury is the same in both, the two powders, though dry and crystalline at first, soon become a permanently fluid amalgam by trituration. The liquid in running along drags a tail after it, and is disposed to separate into portions less and more fluid, but the most fluid part is much inferior to pure mercury in this respect. Specific gravity of the amalgam, 11.

2. Mercury with fusible metal composed of 7 bismuth, 5 lead and 3 tin. A mixture of 4 parts fusible metal with 5 parts mercury compose the most fusible amalgam with a minimum of mercury that I have found. It is formed of 2 atoms bismuth, 1 lead, 1 tin and 2 mercury. Its specific gravity is 12.

3. Mercury, zinc and tin. This amalgam is found the most effectual for the excitation of electric machines. Mr. Cuthbertson recommends 1 part zinc, 1 tin and 2 of mercury for the plate machine amalgam. But for a cylinder the best amalgam I have made contains more than twice the above portion of mercury. I form an alloy of 58 parts zinc and 52 tin, (2 atoms to 1). To this alloy I add 250 mercury, and fuse the mixture; the liquid mass crystallizes about 222° into a white, moderately hard amalgam. This is pulverized in a mortar and mixed up with ¹/₁₂ of its weight of hog’s lard. A small portion then is spread upon a piece of leather and applied to the machine when in action. It is probable however that a harder and less unctuous amalgam may be better adapted to the plate machine. This amalgam of mine consists of 4 atoms of zinc, 2 of tin and 3 of mercury.

I have tried the amalgams of zinc and tin separately and find that they answer for electric excitation as well as when combined. They ought to be formed of 2 atoms zinc and 1 of mercury (58 parts to 167), and of 2 atoms tin and 1 of mercury (104 parts to 167). If we choose to combine them, we have only to take 2 parts of the zinc amalgam and 1 of the tin amalgam and triturate them together.

Bismuth amalgam is not good for electric excitation; lead amalgam is better; but they are much inferior to those of tin and zinc.

Alloys of Copper with other Metals.

1. Copper and iron. These two metals may be united with difficulty by heat; but the compound possesses no useful property.

2. Copper and nickel. A white, hard, brittle alloy is said to be formed by combining these two metals. The alloy is scarcely known.

3. Copper and tin. The metals of copper and tin, may be fused together and united in almost any proportion by skilful treatment; but it is found that only a few of the proportions constitute alloys possessing properties eminently valuable to the arts.

The alloys of copper and tin are commonly called bell-metal; but they receive more particular names according to the purposes for which they are destined, as bronze, speculum metal, gun-metal, &c. those of them which are yellow are frequently confounded in common language with brass, as brass guns, &c. Indeed the ancient Greeks and Romans seem to have been in possession of these two alloys, under one and the same name. The χαλκος of the Greeks, being used for cutting-instruments, must have signified bell-metal, or the alloy of copper and tin as well as brass, as indeed is proved by the analysis of them. The æs of the Romans seems also to have included the same compound. Ancient copper coins too are usually found to contain tin.

Tin united to copper in certain proportions gives a surprising degree of hardness and tenacity to the alloy, much superior in these respects to either of the ingredients. In other proportions it makes the compound highly sonorous, as in bell-metal properly so called. Tin also increases the fusibility of the compound in proportion as it abounds, being itself fusible at the low temperature of 440° Fahrenheit.

The principal varieties in the alloys of copper and tin are enumerated below, beginning with those in which the copper is most abundant. The atom of copper is taken at 56 and that of tin at 52 weight, the hardness of these metals is denoted by 7.5 and 6 respectively, by Kirwan.

(a). Gun-metal. The alloy for brass guns or cannon is made of 100 parts of copper and 11 or 12 of tin. A small portion of iron is found to improve the metal; this is best added in the state of tin-plate, as it more readily fuses and unites with the metal.[20] This compound is hard and extremely tenacious, exceeding in this respect any other alloy of the two metals. The addition or subtraction of 1 or 2 parts of tin materially impairs the tenacity of the alloy. It is constituted of 8 atoms of copper and 1 of tin.

(b). Alloy for edge tools, printers’ cylinders, &c. The best proportion for this compound seems to be 100 parts copper and 15 or 16 tin. When hammered and tempered duly it is fit for making edge tools not inferior to some kinds of steel. It is a compound of greater density than the preceding, though containing more tin; the grain is fine and the metal free from blisters and suited for turning in the lathe. It seems to be the best alloy of the kind for printers’ cylinders; but an analysis which I lately made of some turnings from one of these cylinders gave me much less tin than the above proportion. The alloy (b) is constituted of 6 atoms of copper and 1 of tin.

(c). Alloy for the Chinese gong, cymbals, &c. An alloy formed of 100 parts copper and 23 tin, appears from Dussaussoy’s experiments to form the compound of minimum density. It is used for making cymbals; and nearly accords with the composition of the Chinese gong. It is formed of 4 atoms of copper and 1 of tin. The Chinese gong analysed by Klaproth was composed of 100 copper and 28.2 tin; that by Dr. Thomson of 100 copper and 23.4 tin.

(d). Common bell-metal used for casting bells. This alloy is commonly made of 3 parts copper and 1 of tin; but to be in due proportion for 3 atoms of copper and 1 of tin, it should be formed of 100 copper and 31 tin. It is hard, of a white colour, less malleable than the preceding alloys, and more sonorous. A specimen I analysed consisted of 100 copper and 36 tin. The exact proportion of 100 copper and 31 tin is not essential to produce a sonorous alloy.

(e). Speculum metal. This compound has been investigated with great care by opticians. According to Mr. Mudge the best proportion is 32 parts copper to 14.5 tin, but Mr. Edwards finds 15 parts tin, 1 brass, 1 silver and 1 arsenic. The slightest variation in the proportions of copper and tin impairs the metal. The alloy is white, hard and close grained; it takes a beautiful polish. The use of the minute portions of zinc, silver and arsenic is perhaps to correct the colour of the alloy; though it seems in several alloys that very minute portions of metals apparently foreign to the alloy, improve the density and texture of the metal. It is remarkable with what precision this alloy accords with the atomic combinations of 2 copper with 1 tin. By calculation 32 copper would require 14.8 tin. Mr. Mudge finds 32 copper to 14½ tin, and observes that if ½ a part more of tin be added the metal is too hard. Mr. Edwards indeed says 32 copper and 15 tin; but then he adds 1 part brass, which containing ⅔ of a part of copper, it reduces his proportion to 32 copper and 14.7 tin, almost exactly that required by the theory. When 32 copper and 13½ tin are combined, Mr. Mudge asserts the metal is too soft.[21]

(f). Copper and tin, equal parts. This alloy is of blueish white colour, and of no particular use that I am acquainted with. It consists of the union of 1 atom of copper with 1 of tin.

The other alloys of copper with a higher proportion of tin appear to be uninteresting, and have not been objects of much attention.

Not having an opportunity of forming these alloys synthetically, I contented myself with the analysis of several of them.

The mode of analysis I adopted with compounds of copper and tin, is simple and easy. The alloy is treated with nitric acid, which dissolves the copper, and on being diluted with water throws down the tin in the state of deutoxide. This last is collected on a filtre, dried, and heated to a low red; then ²⁶/₃₃ of this is allowed for the tin (the other 7 parts being oxygen); and the rest of the alloy may be considered as copper. But if thought proper the copper may be thrown down by immersing a plate of lead in the solution, which succeeds better than a plate of iron in nitric solutions of copper.

4. Copper and lead. Copper unites with boiling lead and forms a grey brittle alloy of granular texture. This alloy being heated above the melting point of lead, causes the last metal to run off, leaving the copper nearly pure. The alloy is scarcely of any use.

5. Copper and zinc. Copper and zinc combined form brass, one of the most useful of all alloys. Though this is a general name for such combinations, yet several of the proportions form compounds to which peculiar names are given, some of which will be noticed below.

It may be proper to remark that copper is estimated by Mr. Kirwan at 7½° in hardness, whilst zinc is 6½. The former metal is highly tenacious and malleable; the latter is brittle and malleable only in a small degree. According to Lewis a very small proportion of zinc dilutes the colour of copper and renders it pale; when the copper has imbibed ¹/₁₂ of its weight, the colour inclines to yellow. The yellowness increases with the zinc till the weight of that metal in the alloy equals the copper. Beyond this point if the zinc be increased the alloy becomes paler and paler and at last white, like zinc.

The tenacity of brass is greater than that of either copper or zinc according to Muschenbroek. His experiments give brass nearly twice as strong as copper, and 18 times as strong as zinc. It seems to me most probable that the tenacity of brass increases with the increase of zinc in the alloy to a certain proportion, when it becomes a maximum, and thence diminishes with the further increase of zinc, but experiments are yet wanting, I presume, to ascertain what proportion of the two metals must be taken to form the alloy of greatest tenacity. The same observation may be made as to the maximum hardness; it is not improbable that the two maxima may be found in different kinds of brass.

The point of temperature at which copper fuses is stated to be 27° of Wedgwood’s thermometer, whilst that of zinc is much lower, namely, 680° of Fahrenheit. Common brass is stated to melt at 21° of Wedgwood. It is very probable that all kinds of brass melt at temperatures intermediate between those of copper and zinc; and that the more of zinc the lower will be the fusing temperature; but there have not been direct experiments to ascertain the degrees, as far as I know.

In enumerating the different proportions of such alloys as have come under my notice I shall begin with that containing the maximum of copper, and proceed in gradation to that with the maximum of zinc.

(a). Brass for the manufacture of plated goods. This alloy is composed, judging from one specimen I analysed, of 12 atoms of copper and 1 of zinc; or of nearly 28 parts of copper by weight and 1 of zinc. The atom of copper is here estimated at 56 and that of zinc at 29, or very nearly ½ that of copper. This alloy had much the same qualities apparently as copper itself, only a little more yellow.

(b). Dutch gold, gilding metal. This is the alloy which may be beaten out into thin leaves, after the manner of gold leaf. I have not been able to find any proportions for this compound in books. It seems to have been kept as a secret by the manufacturers. By analysis however I find it composed of 6 atoms of copper and 1 of zinc, or nearly 12 parts copper and 1 zinc by weight. This alloy is probably the most malleable of all the kinds of brass. A leaf containing 12 square inches weighs about ⁷/₁₀ of a grain. The colour, as is well known, makes a good approach to that of gold. It is the composition used for making articles to be gilt, as buttons, &c.

(c). Dipping metal for stamped brass goods. This is a well known article of Birmingham manufacture. It is an alloy both tenacious and malleable, as is manifest from the perfection of the articles. It possesses a beautiful gold colour. A specimen was composed, by my analysis, of 4 atoms of copper to 1 of zinc; or of 8 lbs. of copper and 1 of zinc; or of 4 lbs. copper and 3 of common brass; but it is varied according to the colour wanted.

(d). Soft, fine coloured brass. According to M. Sage, a very fine kind of brass may be made by mixing oxide of copper, calamine, black-flux and charcoal powder together and fusing the mixture in a crucible till the blue flame disappears. The brass is found to weigh ⅙ more than the copper resulting from the weight of oxide. He says when the copper retains ⅕ of zinc the colour is not so fine; and the excess of zinc will be burned off by heat, but the zinc cannot be reduced by burning below ⅙; so that this appears to be a natural limit. Hence this compound, being formed of 6 parts copper and 1 of zinc, must be constituted of 3 atoms of copper and 1 of zinc.

(e). Soft brass preferred for watch movements. There is a kind of brass greatly preferred by watch-makers on account of its working well with steel. I have not met with a specimen; but Dr. Thomson has analysed one and found it to consist of 2 atoms of copper and 1 of zinc;[22] or 4 parts copper and 1 of zinc by weight nearly.

(f). Common hard brass. This constitutes the great bulk of brass, as manufactured in the large way. It is made by exposing granulated copper, calamine, that is, a native oxide of zinc, and powdered charcoal in mixture to a red heat for some hours, and then increasing the heat so as to melt the compound of copper and zinc, the charcoal having carried away the oxygen of the calamine. The metal is then cast into ingots or plates as may be required. This is called brass of cementation as distinguished from the other species, which are usually made from this by fusion with copper or zinc as the case requires.

It is found that 40lbs. of copper with 60lbs. of calamine yield 60 lbs. of brass; hence a great part of the zinc burns away during the process. The brass thus resulting, consisting of 2 parts of copper and 1 of zinc, is of course constituted of 1 atom of each metal united together.

Common brass is malleable, when cold, like the preceding species; but probably does not possess that property in so high a degree. It seems better adapted for turning in the lathe than any other kind of brass. The specific gravity of this brass before it is hammered or rolled is generally about 8.1 or 8.2 by my experience. When rolled it receives a great increase of density, amounting to .5 according to M. Dussaussoy[23], so that what is 8.2 when cast will be 8.7 when rolled; or it is condensed nearly ¹/₁₆ of its volume by the operation of rolling. The same author finds that brass is hardened very considerably by rolling, but rendered less tenacious; however by being heated and consequently softened after rolling, it becomes stronger than ever, and nearly of an intermediate specific gravity between cast and rolled brass.

(g). Prince’s metal, pinchbeck, &c. This compound, as far as I can learn, is usually formed by combining equal weights of copper and zinc, or by fusing together 3 parts of common brass with 1 of zinc. According to Lewis the yellow colour of brass is a maximum in this proportion. The alloy is brittle, or at least much less malleable than common brass. I find the composition of spelter solder, as it is called, or that used for soldering both brass and copper, to be nearly equal parts of copper and zinc. Hence it appears that 1 atom of copper unites to 2 of zinc to form this alloy.

The other alloys of copper and zinc in which the zinc gradually exceeds the copper, become gradually paler in colour and more brittle. They do not promise to be of much utility in the arts, and have not therefore been very particularly investigated by metallurgists.

Besides the binary combinations of copper and zinc and copper and tin, there are ternary combinations of these metals, namely, alloys of copper, zinc and tin. For instance, the metal of which common white buttons are made. I had occasion to analyse a specimen of this metal and found it to be constituted of 4 parts copper, 1 of zinc and 1 of tin; or 4 atoms of copper, 2 of zinc and 1 of tin.

It will be proper to subjoin the methods of analysis which I adopted in regard to brass. Twenty grains, more or less, of the particular articles were dissolved in nitric acid, and the metals were precipitated in the state of sulphurets by hydrosulphuret of lime. The copper is thrown down in the state of a black powder, and the zinc in that of a white powder turning to grey. Great care was taken to add the precipitating liquor gradually in order that the copper might be obtained distinctly from the zinc. The whole of the copper is thus thrown down before any of the zinc precipitate appears. The precipitates were collected and dried in a temperature not exceeding 150°, and then weighed. In both cases one third of the weight was allowed for sulphur, and the remaining two thirds were estimated to be metal; which is agreeable to the known constitutions of these sulphurets. Another method I sometimes practised, which also answers very well; namely, to throw down the whole or greatest part of the copper by a plate of lead, then to throw down the lead by sulphuric acid; after this the liquor was tested by hydrosulphuret of lime to precipitate the copper remaining, if any; and lastly to throw down the zinc by hydrosulphuret of lime.

6. Copper and bismuth. The alloy is brittle and of a pale colour. It is not much known.

7. Copper with antimony. Copper and antimony unite by fusion and form a violet coloured, brittle alloy.

8. Copper and arsenic. These metals unite by fusion in a close crucible, the surface of the mixture being covered with common salt to prevent the oxidizement of the arsenic. The alloy is white and brittle, and is known by the names of white copper, and white tombac.

9. Copper and manganese. These may be united by fusion, and form a red coloured, malleable alloy, according to Bergman.

10. Copper and molybdenum. These metals may be alloyed in various proportions, but the compounds exhibit nothing peculiarly remarkable.

Alloys of Iron with other Metals.

1. Iron with tin. These two metals are alloyed with some difficulty by fusion in a close crucible. The difficulty seems to arise from the very unequal temperatures at which the metals individually fuse. Bergman always found two alloys when the metals were fused together; the one composed of 21 parts tin and 1 of iron, that is, 10 atoms of tin to 1 of iron; and the other of 2 parts iron, and 1 of tin; that is, 4 atoms of iron and 1 of tin. The first was very malleable, harder than tin and not so brilliant; the second but moderately malleable and too hard to yield to the knife.

The formation of common tin-plate is a proof of the affinity of tin and iron. Thin plates of iron, thoroughly cleaned, are dipped into melted tin, when the tin adheres to the surface of the iron, forming with that metal a true chemical union.

2. Iron and lead, &c. Iron combines by fusion more or less perfectly with lead, zinc, bismuth, antimony, arsenic, cobalt, manganese, &c. but the proportions have in few instances been ascertained, and the compounds are generally of little importance.

Alloys of Nickel and other Metals.

Nickel and arsenic. As nickel and arsenic are naturally found in combination, though mostly along with small quantities of other bodies, it is to be presumed that an affinity subsists between them; but I do not know that the proportions have been ascertained in which they unite, or the nature of the alloys.

Alloys of Tin with other Metals.

1. Tin with lead. Tin and lead unite by fusion in any proportion. This alloy, according to Muschenbroek, is harder and much more tenacious than either tin or lead, especially when 3 parts tin and 1 lead are its constituents.

I fused various proportions of tin and lead together, as per the following table, in order to find some of the more prominent characteristics of the several alloys. The specific gravity of the tin was 7.2, that of the lead was 11.23; and the portions taken were such as to combine, 1, 2, or more atoms of tin with 1 of lead. The several metals were melted and the compounds formed under a few drops of tallow, otherwise the oxidation is so rapid that the proportions are disturbed and the quantity of pure alloy is not equal to the weight of the ingredients. Without this precaution it is no uncommon occurrence in small experiments to obtain only 3 parts of fusible alloy from 4 of metal.

Atoms.

Weights

Sp. Gr. by

calculation.

Sp. Gr. by

experim.

Fusing

Point.

Tin.

Lead.

Tin.

Lead.

1

+

1

.58

+

1

9.32

9.17

430°

2

+

1

1.16

+

1

8.64

8.79

350

3

+

1

1.73

+

1

8.25

8.49

340

4

+

1

2.3

+

1

8.00

8.10

345

5

+

1

2.9

+

1

7.93

8.00

350

6

+

1

3.47

+

1

7.81

7.90

360

From the above table it appears that when 1 atom of tin is united to 1 of lead there is an expansion of volume; but when more than 1 of tin are combined to 1 of lead there is a contraction of volume, or the density is above that by calculation. This increase of density is greatest when 3 atoms of tin are combined with 1 of lead; and it is not improbable the tenacity may then be a maximum; though Muschenbroek finds it more tenacious when 3 parts tin are united to 1 of lead, which answers more nearly to 4 atoms tin and 1 of lead; this opinion is countenanced by the fact that tin is much the most tenacious of the two metals taken singly.

It is remarkable that the fusing point of these alloys is below those of either tin or lead. The lowest of all (340°) is when 3 atoms of tin are alloyed with 1 of lead.

Common pewter, I find, is an alloy of 4 atoms of tin and 1 of lead nearly, and fuses about 345 or 350°. This is perhaps the best proportion; it is hard, tenacious and of a good colour. More of lead would impair the colour, and more of tin would impair the tenacity and increase the expence, though it might improve the colour.

Certain articles for family use, such as tea-pots, spoons, &c. are made of white metal, which commonly, though I apprehend improperly, goes by the name of tutenag. This metal in colour approaches more to silver than pewter does. A spoon of this description I found to be pure tin.

2. Tin and zinc. This alloy is easily made by fusion. The metals seem to unite in any proportion. I melted together 29 parts zinc and 52 tin (1 atom of each), and obtained a white hard alloy of about 6.8 specific gravity. When 2 atoms tin and 1 zinc are united the specific gravity is 6.77, which is below the mean. The alloy appears to be very hard and tenacious; and probably might be put to some use.

3. Tin and bismuth. These metals readily combine by fusion in any proportion. When 52 parts tin and 62 bismuth are fused together (1 atom to 1), a fine, smooth, hard but brittle alloy is obtained of the specific gravity 8.42. It fuses at 260°. Two atoms tin and 1 bismuth give an alloy of 8 specific gravity, which fuses about 320°. The alloy of 1 atom tin and 2 of bismuth is of 8.67 specific gravity, and fuses about 260°. The alloy of 3 atoms tin and 1 bismuth is of 7.73 specific gravity, and fuses at 350°. The alloy of 1 atom tin and 3 bismuth is of specific gravity 9.14, and fuses at 330°.

4. Tin with antimony. This compound is said to be white and brittle when formed of equal parts. I did not succeed in uniting the two metals by fusion on a small scale.

5. Tin with arsenic. When 15 parts of tin and 1 of arsenic are fused together the alloy crystallizes in large plates like bismuth, according to Bayen. It is brittle and less fusible than tin. This alloy must be composed of 5 atoms of tin and 1 of arsenic, that is, 312 tin and 21 arsenic.

Alloys of Lead with other Metals.

1. Lead and zinc. These two metals seem to have a weak affinity. They are easily united, or rather mixed, in any proportion by fusion under a little tallow. But however they may be mixed there is a strong tendency to separate again, which no doubt is occasioned in part by their great difference in specific gravity.

I have fused lead and zinc together in various proportions, from 6 parts lead to 1 of zinc, to 1 part lead to 2 of zinc. The compound usually gives a specific gravity rather greater than the mean; but upon being broken the fracture is often like that of zinc in one part and not so in another; and the analysis of fragments proves that a great difference exists in their composition. Subsequent fusion sometimes improves the combination and at other times the contrary. Six parts lead and 1 of tin gave a compound as nearly uniform as any. It was 11 specific gravity, harder and whiter than lead and had much the appearance of pewter, that is, the alloy of tin and lead.

2. Lead and bismuth. These metals alloy well. Three parts lead and 2 of bismuth unite by fusion and form a tenacious alloy which fuses about 340°. Muschenbroek found it ten times stronger than lead. It grows dark coloured soon by keeping. Its specific gravity by my observation is 10.85, which is rather greater than the mean. It is constituted of 1 atom of each metal, or 62 bismuth to 90 lead.

Three parts lead and 4 bismuth (1 atom lead to 2 bismuth) fuses at 250°. This is the lowest temperature at which any alloy of two metals fuses. With a little tin it makes the triple alloy which fuses lower than any other metallic compound, without mercury, as will be shown in the sequel. The specific gravity of this alloy of lead and bismuth is 10.7, which is greater than the mean.

The alloy of 1 part lead and 2 bismuth (1 atom of lead and 3 bismuth), fuses at 280°, and is of 10.1 specific gravity, or rather less than the mean.

The alloy of three parts lead and 1 bismuth (2 atoms of lead and 1 of bismuth) fuses at 450°. The specific gravity is 11, or rather greater than the mean.

3. Lead and antimony. These two metals combine by fusion in any proportion. The alloy is of a fine grain and is brittle or flexible as the antimony or lead prevails. The principal use of this alloy, I believe, is in the formation of printers’ types. The small types require a harder alloy or one with more antimony; the large types have a greater share of lead as being less expensive. On examination of the different types I find 3 proportions of the alloy principally in use. The smallest types are cast from a mixture which very nearly corresponds with 40 parts of antimony to 90 of lead (or 1 atom to 1). It is hard, has a fracture like steel and is of the specific gravity 9.4 or 9.5 nearly, and fuses about 480 or 500°. The proportions were determined both by analysis and by inference from the specific gravity of the metal.

The middle sized types are made of metal composed of 1 atom of antimony and 2 of lead, or 40 parts antimony and 180 of lead. This alloy fuses about 450° or 460° and has the specific gravity of 10 nearly.

The largest types or letters of 2 or 3 inches diameter are made of metal composed of 1 atom antimony and 3 of lead, or 40 parts to 270. This alloy also fuses about 450 or 460°, which is a very remarkable fact. Its specific gravity is usually 10.22. After several trials I could not determine whether the fusing point of this or the preceding alloy was lower; and equal parts of the two alloys fused together were liquified at the same temperature of 450 or 460°.

All the intermediate sizes of types appear to be made of one or other of the three preceding proportions or of mixtures of them, the smaller the type the more of antimony being required to give the requisite hardness. The largest types might, I conceive, be made with a much greater proportion of lead.

When 40 antimony and 360 lead (1 atom to 4) are fused together, the melting point is about 470°. The specific gravity was found 10.4, but probably too low from blisters or air bubbles. The alloy was more flexible than the preceding, but brittle with a fine grained fracture.

Forty parts antimony with 450 lead (1 atom to 5) fused at 490°, and gave 11 specific gravity. This alloy bends and breaks with a fine grained fracture.

Forty parts antimony with 540 lead (1 atom to 6) fused at 510°, and gave 10.8 specific gravity, which in all probability was owing to air bubbles. Now the alloy soft and malleable.

4. Lead and arsenic. When lead is fused in contact with the white oxide of arsenic under a film of tallow and stirred frequently, an union of the two metals takes place and the excess of white oxide is partially converted into arsenic and partly driven off, seemingly taking with it a portion of the lead. A considerable portion of the mass assumes the form of a black spongy compound infusible at the temperature. It contains a portion of the lead and is probably a compound of the metals with oxygen. The fusible alloy has the appearance of lead, but is brittle, breaks without bending and exhibits a fracture like that of antimony and lead. The specific gravity of the alloy is 10.6, or more if not saturated with lead. By treating it with an excess of nitric acid it is dissolved, and the lead may be thrown down by sulphuric acid, and the arsenic acid or oxide by lime. In this way I find the alloy is composed of about 9 parts of lead with 2 of arsenic, or 1 atom of each of the metals. The spongy mass treated with nitric acid yields a similar solution, accompanied with a precipitation of oxide of arsenic.

5. Lead and cobalt. The alloy of these two metals is not easily obtained, probably from the great difference of the temperature at which they fuse. Gmelin fused 1 part cobalt with 1, 2, 4, 6 and 8 parts of lead respectively. Alloys were obtained of the specific gravities 8.12, 12.28 (query 8.28?), —, 9.65 and 9.78 respectively. From these specific gravities it is plain the lead had been in great part dissipated by the heat. For the last or greatest specific gravity corresponds nearly to 2 parts lead and 1 of cobalt. (An. de Chimie, 19—357.)

Triple Alloys, Solders; Fusible Metal, &c.

Though it may seem premature to treat of triple compounds in the present chapter, which professedly is limited to compounds of two elements, yet as the triple alloys are few and so immediately connected with the preceding, it will scarcely require an apology for introducing them here.

Soft solders. Solders for plumbers and tin-workers, are required to melt easily, and yet not too low, as they should withstand a heat greater than boiling water. The fusing point of the soft solders is usually between 300-400°. Plumbers’ solder I believe is commonly formed by mixing equal parts of tin and lead. I procured a specimen of 8.9 specific gravity, and its fusing point was 380°. Probably a more perfect compound would be formed by mixing 104 parts tin with 90 lead (2 atoms to 1), which would give a specific gravity of 8.8 and the fusing point 350°.

Tin workers’ solder is made rather more fusible than that of the plumbers. A specimen I got from the workmen was 8.87 specific gravity and fused at 345°. A mixture of 3 parts tin and 2 of lead would have formed an alloy of the same fusibility, but the specific gravity would have been 8.6 or 8.7 only. Probably a rather less proportion of tin with a little bismuth entered into the composition.

Fusible Metal. Tin, bismuth and lead are metals which melt at comparatively low temperatures; and it has been shewn that the alloys of any two of them usually melt at lower temperatures than the mean, or even than the lower extreme. By analogy it might be inferred that an alloy of tin and lead fused with one of tin and bismuth, would melt below either of the two ingredients. It has been shewn that proportions of bismuth and lead of easiest fusion are 2 atoms bismuth with one of lead; this alloy melts at 250°. An alloy of 2 atoms of bismuth and 1 of tin melts at 260°; and so does that of 1 atom bismuth and 1 tin. These alloys being much more easily fused than any other proportions of these metals, it is from their combinations we are to expect a still further reduction of the fusing point. In fact, a combination of either of the tin and bismuth alloys, with the lead and bismuth alloy, produces almost exactly the same reduction of the fusing temperature.

Thus if 4 atoms of bismuth, 1 of tin and 1 of lead be fused together, the compound melts in boiling water or below 212°. It is equally the case if 3 atoms bismuth, 1 of tin and 1 of lead, are fused together.

The double alloy next to those above mentioned in regard to easy fusion is that of 2 atoms tin, and 1 bismuth. It fuses at 320°. This alloy, united to the one of 2 atoms bismuth and 1 lead, gives a compound of 3 atoms bismuth, 2 tin and 1 lead, which fuses very nearly at the same temperature as the above triple alloys.

In reference to weights, the above proportions for the most fusible metals will nearly be,

Bismuth

14

parts

-

Lead

5

— tin

3

———

10

—

-

—

5

——

3

———

5

—

-

—

2½

——

3

Most of the elementary books have given the proportions of 8 bismuth, 5 lead and 3 tin; or 5 bismuth 2 lead and 3 tin, which nearly agree with some of the above, and give an alloy fusing below 212°.

Wishing to investigate this subject more fully, and it being obvious from the preceding facts that there are only two proportions of tin and lead to be united with bismuth, to produce the desired effect, namely, either 1 atom of tin with 1 of lead, or 2 atoms of tin with 1 of lead, I proceeded as follows:

1 atom tin (52) + 1 atom lead (90) + 1 atom bismuth (62), were fused together; the fusing point was 270°. The alloy was flexible to a certain degree; and the fracture very small grained. To this alloy 31 grains of bismuth were added successively till it was evident the alloy was growing less fusible; the results were as follows:

1

atom tin

+

1

lead

+

1

bismuth;

fuses at

270°

semi fluid.

1

———

+

1

——

+

1½

——

——

235°

1

———

+

1

——

+

2

——

——

205°

1

———

+

1

——

+

2½

——

——

200°

1

———

+

1

——

+

3

——

——

197°

1

———

+

1

——

+

3½

——

——

200°

1

———

+

1

——

+

4

——

——

220°

1

———

+

1

——

+

4½

——

——

205°

1

———

+

1

——

+

5

——

——

240°

semi fluid.

but it retains a little fluidity down to nearly 200°

From this it appears that 3 parts by weight of tin, 5 of lead, and any proportion of bismuth from 7 to 14 will produce an alloy fusing below 212°; but of these the best is 10 or 11 parts.

Again, 2 atoms of tin were combined with 1 of lead and 3 of bismuth, by gradually adding one half of the tin. The several alloys fused without any material difference at or below 200°. A further addition of tin impaired the property as in the above case with bismuth. I did not think it important to mix 2 atoms of tin and 1 of lead with any other proportion than 3 atoms of bismuth.

APPENDIX.

Since the publication of the second part of the first volume, (1810) some important essays on the subject of heat have appeared, which have a direct bearing upon some points of the doctrine on that subject inculcated in the said volume. It may be proper to state the results, with such remarks and reflections as have occurred in the consideration of them.

In the Annales de Chimie for January 1813, also in the Annals of Philosophy, vol. 2, we find a Memoir on the specific heat of different gases, by M. M. De la Roche and Berard. This exhibits a most laborious and refined series of experiments on this most difficult subject. Great merit seems to be due to them, both for invention and execution.

It is unnecessary to describe the particulars of the apparatus and the mode of conducting the experiments, as a description may be found as above referred. It is sufficient to observe that the calorimeter used was a copper cylinder of 3 inches diameter and 6 in length, filled with water, and having a serpentine tube 5 feet in length, running through the interior and opening at both ends on the outside of the vessels. By means of this tube a regular current of any gas of a given temperature (212°) might be passed through the vessel so as to part with its excess of temperature to the water. The quantity of water and the capacity of the vessel for heat were previously determined; and the quantity of heated gas passed through the calorimeter was determinable at any time, as well as the temperature of the water, from the judicious arrangements.

It is easy to see that when an apparatus of this kind is at work, the gas will impart heat, more or less according to its capacity, to the water; and that the temperature of the calorimeter will gradually ascend till it arrives at a maximum; that is, till the refrigerating effect of the surrounding atmosphere upon the calorimeter is equal to the heating effect of the current of gas.

The following Table exhibits the results of their experiments.

Specific Heat

Of the same bulk.

Of the same weight.

Air

1.0000

1.0000

Hydrogen

0.9033

12.3401

Carbonic Acid

1.2583

0.8280

Oxygen

0.9765

0.8848

Azote

1.0000

1.0318

Nitrous Oxide

1.3503

0.8878

Olefiant Gas

1.5530

1.5763

Carbonic Oxide

1.0340

1.0805

Aqueous Vapour

1.9600

3.1360[24]

They found the specific heats of equal volumes of air of the pressures 29.2 and 41.7 inches of mercury to be nearly as 1 ∶ 1.2396, differing from the ratio of the pressures or densities, which is 1: 1.358.

The above table of the specific heat of the permanent gases (excluding aqueous vapour) was corroborated by the results of another series of experiments in which the principle was varied a little: namely, to find how many cubic inches of each gas at a given temperature were required to raise the temperature of the calorimeter a given number of degrees, and inferring the capacities for heat to be inversely as the quantities of gas employed. The differences in the results were from 1 to 10 per cent., which may be considered small, in experiments of such delicacy.

The ratios of the specific heats of several gases being found, it was highly expedient to find the ratio of the specific heat of water, and that of some one gas, as common air. This was effected by passing a small current of hot water through the calorimeter, and comparing the effect of this current with that of the larger one of air, the requisite care being taken to ascertain the quantity of water passing in a given time and its temperature at the ingress. The result of this experiment was that the specific heat of water is to that of common air as 1 ∶ .25 nearly. By two other experiments, varied from the above, results not much differing were obtained, so that the average of the three gave, water to air, as 1 ∶ .2669.

Reducing the specific heats of the gases to the standard of water as unity, we have the following Table of the specific heats of equal weights of the respective bodies:

Water

1.0000

Air

0.2669

Hydrogen

3.2936

Carbonic Acid

0.2210

Oxygen

0.2361

Azote

0.2754

Nitrous Oxide

0.2369

Olefiant Gas

0.4207

Carbonic Oxide

0.2884

Aqueous Vapour

0.8474

Before we animadvert upon these results, it will be expedient to give an abstract of the not less interesting experiments of Messrs. Dulong and Petit, on heat, as given in the Annales de Chimie and de Physique, vol. 7 and 10.

These gentlemen begin by an investigation of the expansion of air by heat. The absolute expansion of air from freezing of water to boiling had been previously determined by Gay Lussac and myself to be from 8 to 11 nearly: they however extended the enquiry above and below these points of temperature, namely to those of freezing and boiling mercury. From the temperature of freezing mercury or thereabouts, to that of boiling water, they find the expansion of air to keep pace with that of mercury, as indicated by the common thermometer; but from the boiling point of water to that of mercury, the latter expands somewhat more in a proportion gradually increasing: as by the following Table.

TABLE I.

Temperature by

Mercurial

Thermometer.

Corresponding

volume of a given

mass of air.

Temperature by an

air Thermometer,

corrected for

expansion of glass.

Fahrenheit.

Centigrade.

Centigrade.

-33°

-36°

0.8650

-36.8

32

0

1.0000

0

212

100

1.3750

100

302

150

1.5576

148.70

392

200

1.7389

197.05

482

250

1.9189

245.05

572

300

2.0976

292.70

680

M. boil 360

2.3125

350.00

The absolute dilatation of mercury claims their attention. They quote nine authorities for the expansion from freezing to boiling water temperatures; the extremes of these nine are, Casbois ¹/₆₇ of original volume, and mine ¹/₅₀ of the same. They determine it to be ¹/₅₅.₅. By doubling and tripling the elevation of the temperature, they made observations from which are deduced the results of the following Table. The dilatations are for each degree of the thermometer centigrade, to which I have added the corresponding ones for Fahrenheit’s.

TABLE II.

Temperature by an

air Thermometer.

Mean absolute

dilatations

of mercury.

Temperatures indicated

by dilatation of mercury,

supposed uniform.[25]

Fahr.

Cent.

Fahr.

Cent.

Fahr.

Cent.

32°

0°

0

0

32°

0°

212

100

¹/₉₉₉₀

¹/₅₅₅₀

212

100

392

200

¹/₉₉₄₅

¹/₅₅₂₅

400.3

204.61

572

300

¹/₉₅₄₀

¹/₅₃₀₀

597.5

314.15

By a series of observations on the apparent dilatation of mercury in glass vessels, compared with the results in the above tables, they deduce the absolute dilatation of glass for each degree of the thermometer, and the temperature that would be indicated by supposing the uniform expansion of a glass rod adopted as the measure of temperature as under:

TABLE III.

Temperature by

an air Thermom.

Mean apparent

dilatation of

mercury

in glass.

Absolute

dilatation of

glass in

volume.

Temperature by

a Thermometer

made of glass.

Fahr.

Cent.

Fahr.

Cent.

Fahr.

Cent.

Fahr.

Cent.

212°

100°

¹/₁₁₆₆₄

¹/₆₄₃₀

¹/₆₉₆₆₀

¹/₃₈₇₀₀

212

100

392

200

¹/₁₁₄₃₀

¹/₆₃₇₈

¹/₆₅₃₄₀

¹/₃₆₃₀₀

415.8

213.2

572

300

¹/₁₁₃₇₂

¹/₆₃₁₈

¹/₅₉₂₂₀

¹/₃₂₀₀₀

667.2

352.9

The absolute dilatations of iron, copper, and platina were investigated with great address, from 0° to 100° and from 0° to 300° centigrade; and were found as per Table below, for each degree of the centigrade thermometer.

TABLE IV.

- (A) = Temp. by the air Therm.

- (B) = Mean dilatation of iron, in volume.

- (C) = Temp. by iron rod Therm.

- (D) = Mean dilatation of copper in volume.

- (E) = Temp. by copper rod Therm.

- (F) = Mean dilatation of platina in volume.

- (G) = Temp. by platina rod Therm.

(A)

(B)

(C)

(D)

(E)

(F)

(G)

Cent.

100°

¹/₂₈₂₀₀

100°

¹/₁₉₄₀₀

100°

¹/₃₇₇₀₀

100°

300

¹/₂₂₇₀₀

372.6

¹/₁₇₇₀₀

328.8

¹/₃₆₃₀₀

311.6

Connected with this subject was another important enquiry, whether the capacities of bodies for heat remain constant at different temperatures, or whether they diminish or increase as the temperature advances. In other words, does a body that requires a certain quantity of heat to raise it from 0° to 100° centigrade, require the same quantity to raise it from 100° to 200°, and from 200 to 300°, &c.; or does it require less or more as we ascend? This enquiry involves that of the measure of temperature. They adopt the uniform expansion of air, or the air thermometer, as the proper measure, and find the capacity of iron,

From 0°

to 100° = .1098

0

to 200  = .1150

0

to 300  = .1218

0

to 350  = .1255

the capacity of an equal weight of water being 1.

The following Table exhibits the capacities of seven other bodies according to their results.

TABLE V.

Mean capacity

between 0°

and 100°

Mean capacity

between 0°

and 300°

Mercury

.0330

.0350

Zinc

.0927

.1015

Antimony

.0507

.0549

Silver

.0557

.0611

Copper

.0949

.1013

Platina

.0335

.0355

Glass

.1770

.1900

According to this table the capacities of bodies increase with the temperature in a small degree: and the increase, though it would still exist, would be less, if the common mercurial thermometer were the measure of temperature.

Also supposing that thermometers made of these bodies and graduated by immersion in freezing and boiling water into 100°; if these were all immersed in a fluid in which an air thermometer stood at 300°. Then the relative temperatures of the several thermometers would be as under, if measured by the absolute quantity of heat acquired, namely,

Iron

322.2°

Silver

329.3

Zinc

328.5

Antimony

324.8

Glass

322.1

Copper

320.0

Mercury

318.2

Platina

317.9

From these observations they infer that the law which has been promulgated for the refrigeration of bodies, cannot be strictly true: namely, that bodies part with heat in proportion as their temperature exceeds that of the surrounding medium.

Some animadversions on the general laws relative to the phenomena of heat, announced in my elements of Chemical Philosophy (page 13) then follow, together with a table drawn up to show the discordance between the air thermometer and the mercurial thermometer, both being graduated in the manner I proposed in the said elements. On these points I may have to remark in the sequel.

The first part of the Essay concludes with some remarks to shew why a preference should be given to the air thermometer, or more strictly, the thermometer whether of mercury or any other body, supposed to be graduated so as to correspond with an air thermometer of equal degrees.

The Second Part of the Essay is on

The Laws of Refrigeration.

Adopting the air thermometer as the most eligible measure of temperature, Messrs. Dulong and Petit proceed to investigate the laws of the refrigeration of bodies, under a great variety of circumstances, in vacuo and in air or gases of different kinds and densities. The inquiry abounds with experiments and observations evincing great skill and acuteness; but which it will not suit our purpose to detail. It may suffice for us to give a general summary of the Laws deduced by them from their experiments, at the same time recommending all those who feel sufficient interest in the subject to peruse the essay at large, which exhibits a profound philosophical train of experiments, the results of which are illustrated by the aid of mathematical generalization.

“Law 1. If one could observe the cooling of a body placed in a vacuum, and surrounded by a vessel absolutely destitute of heat, or otherwise deprived of the power of radiating heat, the velocities of cooling would decrease in geometrical progression when the temperatures diminished in arithmetical progression.”

“Law 2. The temperature of a vessel containing a vacuum being constant, and a body being placed in it to cool, the velocities of cooling for excesses of temperature in arithmetical progression, decrease as the terms of a geometrical progression diminished by a constant number. The ratio of this progression is the same for the cooling of all kinds of bodies, and is equal to 1.0077.”

“Law 3. The velocity of cooling in a vacuum for the same excess of temperature, increases in geometrical progression, the temperature of the vessel circumscribing the vacuum increasing in an arithmetical progression. The ratio of the progression is the same as above, namely 1.0077 for all kinds of bodies.”

“Law 4. The velocity of cooling due to the sole contact of a gas is entirely independent of the nature of the surface of the cooling bodies.”

“Law 5. The velocity of cooling due to the sole contact of a gaseous fluid varies in a geometrical progression, while the excess of temperature itself varies in a geometrical progression. If the ratio of this second progression be 2, that of the first is 2.35, whatever be the nature of the gas and its elastic force.”

“This Law may be likewise announced by saying that the quantity of heat carried off by a gas is in all cases proportional to the excess of the temperature of the heated body raised to the power whose index is 1.233.”

“Law 6. The cooling power of a gaseous fluid diminishes in a geometrical progression, when its tension itself diminishes in a geometrical progression. If the ratio of this second progression is 2, the rate of the first is 1.366 for atmospheric air; 1.301 for hydrogen; 1.431 for carbonic acid; and 1.415 for olefiant gas.”

“This law may also be presented as follows: The cooling power of a gas, all other things being alike, is proportional to a certain power of the pressure. The exponent of this power depends on the nature of the gas, and is for air 0.45; for hydrogen 0.315; for carbonic acid 0.517; and for olefiant gas 0.501.”

“Law 7. The cooling power of a gas varies with its temperature in such a manner that if the gas can dilate so as to preserve the same uniform tension, the cooling power will be as much diminished by the rarefaction of the gas, as it is increased by its augmentation of temperature; so that definitively it depends only on its tension.”

Another ingenious Essay was published by Messrs. Dulong and Petit, in the Annal. de chimie et de physique, vol. 10, namely, “Researches on some important points of the theory of heat.”—One object is to ascertain the specific heats of bodies with superior precision. A table of the specific heats of certain metals, found by their method, is given, together with the weights of the atoms of those metals, and the products of the specific heats and weights of the atoms, as under:

Specific heats,

that of water

being 1

Weights of the

atoms, that of

oxygen being 1

Product of the

weight of each

atom by the

corresponding

capacity.

Bismuth

0.0288

13.300

0.3830

Lead

0.0293

12.950

0.3794

Gold

0.0298

12.430

0.3704

Platinum

0.0314

11.160

0.3740

Tin

0.0514

7.350

0.3779

Silver

0.0557

6.750

0.3759

Zinc

0.0927

4.030

0.3736

Tellurium

0.0912

4.030

0.3675

Copper

0.0949

3.957

0.3755

Nickel

0.1035

3.690

0.3819

Iron

0.1100

3.392

0.3731

Cobalt

0.1498

2.460

0.3685

Sulphur

0.1880

2.011

0.3780

The inference intended from this Table is pretty obvious, namely, that the atoms or ultimate particles of the above bodies contain or attach to themselves the same quantity of heat, or have the same capacity. This principle the authors think will apply to the simple atoms of all bodies, whether solid, liquid, or elastic; but they hold it does not apply to compound atoms. It differs therefore essentially from a suggestion of mine, made eighteen years ago, (see Vol. I. page 70,) that the quantity of heat belonging to the ultimate particles of all elastic fluids, must be the same under the same pressure and temperature. They seem to apprehend, from experience, that a very simple ratio exists between the capacities of compound atoms and that of the elementary atoms. They draw another inference from their researches, that the heat developed at the instant of the combination of bodies, has no relation to the capacity of the elements; this loss of heat, they argue, is often not followed by any diminution in the capacity of the compounds. They seem to think that electricity developes heat in the act of combination; but they do not deny that a change of capacity may sometimes ensue, and heat be developed from this cause.

Remarks on the above Essays.

Results nearly agreeing with those of De la Roche and Berard, on the capacity of certain elastic fluids for heat, were about the same time obtained by M. M. Clement and Desormes. (See Journal de Physique, Vol. 89—1819.) Such results, impugning some of the most plausible doctrines of heat, could not be admitted but upon very good authority. I remained doubtful, in some degree, till satisfied by my own experience. I procured a calorimeter of the construction of De la Roche’s, and to simplify the experiment, instead of forcing a given volume of hot air through the calorimeter to impart heat to the water, I drew, by means of an air-pump, a certain volume of atmospheric (or other air) of the common temperature, through the calorimeter filled with hot water, in order to find how much this process would accelerate the cooling. From several experiments of this kind, I am convinced that the capacity of common air for heat is very nearly such as the above ingenious French chemists have determined. That is, it is about ¹/₇ part only of what Dr. Crawford deduced from his experiments, and nearly the same part of what I inferred from my theoretic view of the specific heats of elastic fluids. (See Vol. I. pages 62 and 74.)

Indeed M. M. De la Roche and Berard appear to have been puzzled with the admission of their own results. The combined heats of oxygen and hydrogen gases give only .6335 for the specific heat of water; whereas by experiment the heat of water is found to be 1, notwithstanding an immensity of heat is evolved during the combination of these gases.[26]

“It is necessary therefore,” they observe, “to abandon the hypothesis which ascribes the evolution of heat in cases of combination to a diminution of specific heat in the bodies combined, and admit with Black, Lavoisier, and Laplace, and many other philosophers, the existence of caloric in a state of combination in bodies.” I am not aware of any writer that denies the existence of caloric in a state of combination of bodies. Dr. Crawford, who would be thought the most likely to err in this respect, maintains, “that elementary fire is retained in bodies partly by its attraction to those bodies and partly by the action of the surrounding heat,” and that “its union with bodies will resemble that particular species of chemical union wherein the elements are combined by the joint forces of pressure and of attraction.” (On animal heat, 2d edition, page 436.) He is perhaps somewhat unfortunate in his instance in the combination of carbonic acid and water; muriatic acid or ammonia and water would have been more in point.

The truth is, these important experiments shew that in elastic fluids the increments of temperature are not proportional to the whole heat, compared with the like increments of temperature and whole heat in those bodies when in the liquid and solid states.

The specific heats of bodies, it is well known, are determined by means of the relative quantities of heat necessary to raise the temperature of those bodies a certain number of degrees. They are expressed by the ratios of those quantities. If the capacities of the same bodies for heat were permanent at all temperatures, then these ratios would also express those of the whole quantities of heat in bodies. In fact, most authors represent the specific heats as expressing both the ratio of the total quantities of heat in bodies, and of the relative quantities to raise their temperature a given number of degrees; but it is the latter only which they accurately represent, and the former only hypothetically.

In regard to bodies in the solid and liquid forms, all experience shews that their capacities for heat are nearly if not accurately constant within the common range of temperature; it seems therefore not unreasonable to infer that the whole quantity of heat in each is proportional to their increments. When, however, a solid body by an increase of temperature assumes a fluid form, and absorbs heat without any increase of its temperature, its total quantity of heat is thus increased; and it is contended by the writers on capacity, that the increments of heat afterwards are increased in the same proportion as the total quantities. This is probable enough; but it ought to be proved in several instances by direct experiment before it can safely be admitted as a general principle; more especially now since the analogy in the case of a liquid becoming an elastic fluid is found to fail in this particular. As an instance of uncertainty, the capacity of ice to water has been found as 9 to 10 by one person, and as 7.2 to 10 by others; such wide difference in the results shows there must be a difficulty in determining the specific heat of ice, and that it may even be doubted whether the specific heat of ice or water is greatest.

From the foregoing detail of experiments on elastic fluids, it appears evident that such fluids exhibit matter under a form in which it has the greatest possible capacity for heat, when capacity is understood to denote the total quantity of heat connected with the fluid; but if the capacity or specific heat is meant to denote the quantity of heat necessary to raise the body a given number of degrees of temperature, then the elastic fluid form of matter is that which has the least capacity for heat of any known form of the same matter. When therefore we use the terms specific heat as applied to elastic fluids we should henceforward carefully distinguish in what sense they are used; but the terms may still be indifferently used in the one or the other sense as applied to liquids and solids, till some more decisive experiments shew that a distinction is required. Probably the anomalies that have occurred in investigations of the zero of cold, or point of total privation of heat, are in part due to the want of accordance between the ratio of the total quantities of heat in bodies, and the ratio of the quantities producing equal increments of temperature.

The greatest possible quantity of heat which a given weight of elastic fluid can contain is when the dilatation of the fluid is extreme. For, condensation, whether arising from mechanical pressure or from increased attraction of the atoms of matter for each other, tends to dissipate the heat, by increasing its elasticity. Hence increase of temperature, at the same time that on one account it increases the absolute quantity of heat in an elastic fluid, diminishes the quantity on another account by an increase of pressure, if the fluid be not suffered to dilate. This is well known from the fact that condensation produces increase of temperature in elastic fluids.

When it is considered that all elastic fluids expand the same quantity by the same increase of temperature, it might be imagined that all of them would have the same capacity, or require the same quantity of heat to produce that expansion. The results of De la Roche and Berard do not seem to admit of this supposition, though the differences of the capacities of elastic fluids of equal volumes are not very great. There is a remarkable difference too between their results and those of Clement and Desormes, in regard to hydrogen gas: namely, .9033 and .6640; also in carbonic acid gas, 1.2583 and 1.5. The subject deserves further investigation.

In reference to the experiments of Dulong and Petit, on the relative expansions of air and mercury by heat, I have no doubt their results are good approximations to the truth. My former experiments were chiefly made in temperatures between 32° and 212°, and I found, as General Roi had done, the expansion of air to be somewhat greater in the lower half than in the upper half of that interval, compared with mercury. On a repetition of the experiments, I think the difference is less than I concluded it to be, and I find that the like coincidence of the air scale and mercurial, continues down to near freezing mercury; at least the difference will not be so great as my new table of temperature makes it at page 14. I have made some experiments on the expansions of air above 212°, which lead me to adopt the results of Dulong. On a comparison of the air and mercurial thermometer upon the laws which I pointed out, namely, the former expanding in geometrical progression to equal intervals of temperature, and the latter expanding as the square of the temperature reckoned from its freezing point, it appears that in the long range of 600° from freezing water to boiling mercury, the greatest deviation of the two thermometers does not exceed 22°. However, the great deviation of the scales between the temperatures of freezing water and freezing mercury, is sufficient to shew, as Dulong and Petit have observed, that their coincidence is only partial. Like the scales of air and mercury, which are so nearly coincident from -40° to 212° that scarcely any difference is sensible, though no one doubts of its existence; yet afterwards the differences become obvious enough, and the greater the farther we advance.

Expansion of Mercury. See page 34, vol. I. I have overrated the expansion of glass bulbs (as will be seen presently,) and hence that of mercury; my expansion of mercury corrected on account of the glass, will be ¹/₅₃ nearly, which leaves it still greater than Dulong’s. The 2nd table of Dulong is valuable, on account of its affording us information of the rate of expansion in the higher degrees of temperature, from a given or standard air thermometer.

Iron, Copper, and Platina.

Expansion of Glass.—By the 3rd Table of Dulong and Petit, it appears these ingenious chemists found the expansion of glass for 180°, or from 32° to 212°, very nearly the same as had been determined previously by Smeaton and others. It also expands increasingly with the temperature, whether it is estimated by the air or mercurial standard. This was observed by Deluc, but more extensively by the present authors. The expansions of iron, copper, and platina, from 32° to 212° as detailed in the 4th table, agree nearly with the results of others; but the expansions in the higher part of the scale manifest some remarkable facts not before known. Platina not only expands the least of the above bodies, but its expansion is almost equable; iron expands more than glass and less than copper, but the most unequally of any one, the expansion increasing rapidly as the temperature advances. These facts explain some others which have fallen under my observation. I was formerly surprised to find glass and iron expand so nearly alike (see vol. I. page 31); but it now appears that iron increases more slowly in proportion than glass about the freezing point. More recently I procured a small thermometrical vessel of platina to contain water like those described at page 31, vol. I, and having filled it and treated it as the other metallic vessels, I was again surprised to find that the apparent greatest density of water in this vessel was at 43°, whereas I expected to have found it below 42°, the point for glass vessels. This observation, in conjunction with Dulong’s, shews, that platina expands more than iron at low temperatures, though for a range of 300° the whole expansion of the platina is to that of the iron as 2 to 3 nearly. Hence the error (for I now consider it as such) which I was led into with respect to the expansion of glass bulbs, (see vol. I. page 32) and subsequently into that of the expansion of mercury abovementioned. It is not the expansion of glass which approaches that of iron, but it is the reverse, which occasions the two bodies to meet so nearly in the table, page 31. This consideration will affect the point of greatest density of water also; for, the less the expansion of iron and glass, the nearer will be the points of real and apparent greatest density of water, contained in vessels of those materials. My observations on brown earthenware are scarcely to be relied upon from the difficulty of making such vessels water tight: but the common white ware I have verified repeatedly since the publication of that table, and am satisfied the point of apparent greatest density, is at or near 40° in such vessels; hence the real maximum density of water must be below 40°. I am inclined to adopt 38° as the most proximate degree.

Capacities of bodies for heat. In the 5th table of Dulong, we have the specific heats of glass and of six metals, determined between freezing and boiling water: that of iron is given before. So far the question does not involve that of the measure of temperature. Their results afford no striking differences from those previously determined; however, it is desirable to find a greater accordance amongst philosophers in this respect. The experiments which give the specific heats between 0° and 300° centigrade, are original and interesting. The results go to shew that the capacities of bodies increase in a small degree with the temperature. But supposing that these results may be relied upon as accurate (which can scarcely be affirmed of any former ones) still the character of them may be changed by adopting a different measure of temperature.

The Essay of M. M. Dulong and Petit, in the 10th vol. of the An. de chimie (see An. of Philosophy, vol. 14th, 1819) manifests great ingenuity. It does not appear, however, so fortunate either in theory or experiment as the former one. It would be difficult to convince any one, either by reasoning or by experience that a number of particles of mercury at the temperature of -40°, whether in the solid,, liquid, or elastic state, have all the same capacity for heat. Indeed the experiments of De la Roche and Berard, if they are to be credited, demonstrate the inferior capacity of condensed air to rarefied air; and if the same body changes its capacity in the elastic form, it may well be concluded that all the three forms have not the same capacity. M. M. Dulong and Petit have themselves shewn, in their former essay, (see page 276) that solid bodies vary in their capacities for heat, and that scarcely any two bodies, vary alike; hence it is impossible that the product of the weight of the atom and specific heat of the body should be a constant quantity. Their specific heat of certain metals differ greatly from what is found by others. For instance, they make the specific heat of lead .0293; the lowest authority I have seen is Crawford, .0352, and the highest Kirwan .050; from repeated trials I have lately found it, upon an average, .032. The weights of some of the atoms in their table, differ materially from what are commonly received; for instance, bismuth is 13.3 instead of 9; also copper, silver, and cobalt, are only half the weights of some authors. The gases too are unfortunate examples. Oxygen gas gives a product of .236 instead of .375; azotic gas gives a product .1967, if oxygen be to azote as 7 to 5, but a product of .393 if oxygen be to azote as 7 to 10: by Dr. Thomson’s ratio of oxygen to azote, 4 to 7, the product will be .482, very different from .375. Hydrogen will give a product of .47 or .41 instead of .375. All these differences, it may be said, are occasioned by errors in the specific heats of the gases; but if errors of this magnitude can still subsist after all the care that has been taken, we shall scarcely know what to trust in experimental philosophy.

If M. Dulong would assume all his simple elements in an elastic state and under one uniform pressure, the hypothesis would then make a part of mine (vol. 1. page 70), and there is great reason to believe it would be either accurately true or a good approximation; but to suppose that some of the bodies should be in a solid state, having their particles united by various degrees of attraction, others fluid, and others in the elastic state, without any material modifications of their heat arising from these circumstances, appears to me to be in opposition to some of the best established phenomena in the mechanical philosophy.

Their observations on the specific heat of compound elements, on the relation of the heat developed by combination, as compared with the heat of the elements before and after the combination, &c., are not supported by a detail of actual experience. Heat given out by chemical changes they suppose not to have been previously in a state of combination with the elements. As an argument, the heat given out by charcoal kept in a state of ignition, by a current of galvanic fluid, is adduced. It is true this case is most easily explained, by allowing that the galvanic fluid is in such circumstances converted into heat. But the charcoal does not undergo any chemical change, and therefore this is not a case in point.

All modern experience concurs in shewing that the heat of combustion is primarily dependent on the quantity of oxygen combining. The heat evolved by the combustion of phosphorus and hydrogen is very nearly, if not accurately, in proportion to the oxygen spent. The heat by the combustion of charcoal is not in a much less ratio: and I find the heat in burning carbonic oxide, carburetted hydrogen and olefiant gas is the same as in burning hydrogen gas, provided the combining oxygen is the same.

One difficulty seems to have occurred to M. M. Dulong and Petit. They all along conceive that the specific heats of bodies, that is, the heats producing equal increments of temperature, must necessarily be proportionate to their whole heat. This is purely hypothetical, till established by experiment. The generality of writers on specific heat had conceived it almost confirmed by experiment. The results of Delaroche and Berard have shewn that in elastic fluids the increments of heat are not proportional to the whole quantities, but on the contrary are less when a body is elastic than when liquid. Indeed some writers have argued this should be the case; because a body nearly saturated with another has less affinity for it left.[27] It is plain then that oxygen gas or any other elastic fluid, may have a small specific heat in the sense above defined, and yet have an almost unlimited quantity of heat. I am not aware of any one established fact that does not admit of an explanation upon the hypothesis that heat exists in definite quantities in all bodies, and is incapable of any change, except perhaps into one of the other equally imponderable bodies, light or electricity.

NEW TABLE OF THE

Forces of Vapours in Contact with the

Generating Liquids at Different Temperatures.

- (A) = Temperatures by the common thermometer.

- (B) = Ether vapour, ratio 2 Spec. Gravity .72

- (C) = Sulphuret of carbon vapour, ratio 1.978

- (D) = Alcohol vapour, ratio 2.7 Spec. Gravity .82

- (E) = Acetic acid vapour, ratio 2.57

- (F) = Water, ratio 2.602()

(A)

(B)

(C)

(D)

(E)

(F)

Inches

of M.

Inches

of M.

Inches

of M.

Inches

of M.

Inches

of M.

7°

3.75

3.134

.193

.11

35

7.5

6.20

.560

.27

.29

65+

15.

12.26

1.51

.69

.75

97

30

24.26

4.07

1.77

1.95

133

60

48.

11.00

4.54

5.07

173

120

29.70

11.7

13.18

220

240

80.2

30.

34.2

272

88.9

340

231

This is an improved and extended table of the force of vapour, similar to that at page 14, vol. I. It shews that the different vapours increase inforce in geometrical progression, to certain intervals of temperature, the same to most or all liquids. These intervals of temperature were presumed in the former table, to be in reality equal to one another; but the accuracy of this last notion has been questioned.

TABLE

Shewing the expansion of air, and the elastic

force of aqueous and ethereal vapour,

at different temperatures.

TABLE III.

Temperat.

Vol. of

air.

Utmost force of

Weight of 100

cubic inches

of aqueous

vapour.

Aqueous

vapour.

Ethereal

vapour.

-28°

420

Inches of

Inches of

-20

428

Merc.

Merc.

-10

438

Grains.

0

448

.08

10

458

.12

20

468

.17

30

478

.24

32°

480

.26

7.00

.178

33

481

.27

7.18

.184

34

482

.28

7.36

.191

35

483

.29

7.54

.197

36

484

.30

7.73

.203

37

485

.31

7.92

.209

38

486

.32

8.11

.216

39

487

.33

8.30

.222

40

488

.34

8.50

.229

41

489

.35

8.70

.235

42

490

.37

8.90

.245

43

491

.38

9.10

.255

44

492

.40

9.31

.267

45

493

.41

9.52

.275

46

494

.43

9.74

.284

47

495

.44

9.96

.293

48

496

.46

10.18

.303

49

497

.47

10.41

.313

50

498

.49

10.64

.323

51

499

.50

10.87

.329

52

500

.52

11.10

.341

53

501

.54

11.34

.354

54

502

.56

11.59

.366

55

503

.58

11.85

.378

56

504

.59

12.12

.384

57

505

.61

12.39

.396

58

506

.62

12.66

.402

59

507

.64

12.94

.414

60

508

.65

13.22

.420

61

509

.67

13.51

.432

62

510

.69

13.80

.444

63

511

.71

14.10

.456

64

512

.73

14.41

.468

65

513

.75

14.72

.480

66

514

.77

15.04

.492

67

515

.80

15.36

.509

68

516

.82

15.68

.521

69

517

.85

15.90

.539

70

518

.87

16.23

.551

71

519

.90

16.56

.569

72

520

.92

17.00

.580

73

521

.95

17.35

.598

74

522

.97

17.71

.610

75

523

1.00

18.08

.627

76

524

1.03

18.45

.645

77

525

1.06

18.83

.662

78

526

1.09

19.21

.680

79

527

1.12

19.60

.700

80

528

1.16

20.00

.721

Applications of the above Table.

These tables will be found of great use in reducing volumes of air from one temperature or pressure to any other given one: also in determining the specific gravities of dry gases from experiments on those saturated with or containing given quantities of aqueous or other vapours.

As several writers, and some of considerable eminence, have given erroneous or imperfect formulæ on these subjects, more particularly with regard to the effect of aqueous vapour in modifying the weights and volumes of gases, it has been thought proper to subjoin the following precepts and examples for the use of those who are not sufficiently conversant in such calculations.

The 5th column of the above table, or weight of aqueous vapour, is new, and may therefore require explanation. Gay Lussac is considered the best authority in regard to the specific gravity of steam; but it would be well if his results were confirmed or corrected, as they are of importance. According to his experience, the specific gravities of common air and of pure aqueous vapour, of the same temperature and pressure, are as 8 to 5, or as 1 to .625. Now I assume that 100 cubic inches of common air, free from moisture, of the temperature 60° and the pressure of 30 inches of mercury, weigh 31 grains nearly. It is an extraordinary fact that philosophers are not agreed upon the absolute weight of a given volume of common air. Most authors now assume the weight of 100 inches = 30.5 grains, whilst according to my experience it is more than 31 grains. If common air be assumed 31 grains, steam would be 19⅜ grains for 100 cubic inches, at the same temperature and pressure, could it subsist; but as it cannot sustain that pressure at the temperature of 60° we must deduct according to the diminished pressure, the utmost force of steam at 60° being .65 parts of an inch of mercury, we have 30 inches ∶ 19⅜ grains ∷ .65 ∶ .420 grains = the weight of 100 cubic inches of aqueous vapour at 60° and pressure .65 parts of an inch; which is the number given above in the table. The like calculation is required for any other pressure: but in addition to this, there is to be an allowance for the temperature from the 2d column: Thus, let the weight of 100 cubic inches of steam at 32° be required. We have 30 inch. ∶ 19⅜ grs. ∷ .26 inch. ∶ .1679 grs.; the weight of 100 inches of steam at 60°; then if 480 ∶ 508 ∷ .1679 ∶ .178 grs. = weight of 100 cubic inches of steam at 32° and pressure .26 parts of an inch, the tabular number required.

Examples.

1. How many cubic inches of air at 60° are equivalent in weight to 100 cubic inches at 45°?

By the column headed volume of air we have this proportion, if 493 ∶ 508 ∷ 100 inch. ∶ 103.04 inches, the volume required.

2. How many cubic inches of air with the barometer at 30 inches height, are equal in weight to 100 cubic inches when the barometer stands at 28.9 inches?

Rule. The volume of air being inversely as the pressure, we have, 30 ∶ 28.9 ∷ 100 inches ∶ 96⅓ inches the answer.

3. How many cubic inches of dry air are there in 100 inches saturated with aqueous vapour, at the temperature of 50°, and pressure 30 inches of mercury?

Here the formula

(p - f)

p

applies, where p denotes the atmospheric pressure at the time, and f denotes the utmost force of vapour in contact with water at the temperature. Hence p = 30, f = .49 per table, and we have

(p - f)

=

(30 - .49)

=

29.51

=  98¹¹/₃₀, or

p

30

30

98¹¹/₃₀

percent dry air.

&  1¹⁹/₃₀

vapour.

100

If the vapour of ether is assumed, then f = 10.64, and we have

(p - f)

=

(30 - 10.64)

=

19.36

=  .645, or ...

p

30

30

64½

per cent dry air.[28]

35½

per cent ethereal vapour.

100

4. Suppose we find by trial the weight of 100 cubic inches of common air saturated with vapour at 60°, the barometer standing at 30 inches to be 30.5 grains, and the weight of hydrogen gas in like circumstances to be 2.118 grains; query the weights of 100 cubic inches of each gas free from vapour, and their specific gravities, the temperature and pressure being as above?

If 30.5 ∶ 2.118 ∷ 1 ∶ .0694 = sp. gr. of vapourized hydrogen, that of vapourized air being 1. Subtracting .42 grs. (weight of vapour per table) from 30.5 grs., leaves 30.08 grains; and subtracting .65 parts of an inch from 30 inches, leaves 29.35 inches. Hence 100 cubic inches of dry air at the pressure of 29.35 inches, weigh 30.08 grains; and we have 29.35 ∶ 30 ∷ 30.08 ∶ 30.746 grains, the weight of 100 inches of dry air. Again, subtracting .42 grs. from 2.118, leaves 1.698 grains = weight of 100 cubic inches of hydrogen of 60° and sustaining the pressure of 29.35 inches; whence if 29.35 ∶ 30 ∷ 1.698 ∶ 1.736 grains, weight of 100 inches of dry hydrogen; and 30.746 ∶ 1.736 ∷ 1 ∶ .05645 = sp. gr. of dry hydrogen, that of dry air being unity. Or the results may be exhibited as under:

Weight of 100 cubic inches.

Sp. Gravities.

Vap. air

30.5

grains

1

14.4

Vap. hydrogen

2.118

—

.0694

1

Dry air

30.746

grains

1

17.7

Dry hydrogen

1.736

—

.05645

1

FORMULÆ FOR DETERMINING THE

PROPORTIONS OF COMBUSTIBLE GASES

IN MIXTURES.

It frequently happens, especially in the decomposition of vegetable substances by heat, that the product consists of several combustible gases in mixture, and it is desirable to determine the proportions of each of those which collectively constitute the mixture. The following forms will be found useful for this purpose.

1. Carbonic oxide and hydrogen.

Let x = the volume of carbonic oxide, y = that of hydrogen, w = that of mixture, and a = that of carbonic acid, produced by exploding the mixed gases with oxygen over mercury.

Then the carbonic oxide, or  x = a,

and the hydrogen, or  y = w - a.

2. Sulphuretted hydrogen and hydrogen.

Let x = the volume of sulphuretted hydrogen, y = that of hydrogen, w = that of the mixture, and g = the oxygen spent in the combustion of w.

- Then because x + y = w,

- and 1½x + ½y = g;

- we have x = g - ½w,

- and y = 1½w - g.

3. Phosphuretted hydrogen and hydrogen; also

carburetted hydrogen and hydrogen, and

carburetted hydrogen and carbonic oxide.

The notation being as above, we have x + y = w, and 2x + ½y = g (see page 171): and,

x =

2g - w

,   and  y =

4w - 2g

.

3

3

4. Olefiant gas and carburetted hydrogen.

The notation being as above, we have

- x + y = w, and

- 3x + 2y = g; whence

- x = g - 2w and

- y = 3w - g.

5. Carburetted hydrogen, carbonic oxide and hydrogen.

Let x = carburetted hydrogen, y = carbonic oxide, z = the hydrogen, g = the oxygen spent in the combustion of w volumes of mixed gas, and a = the carbonic acid produced.

Then x + y + z

=

w,

x + ½y + ½z

=

g,

and 2x + y

=

a.

whence we have

x =

2g - w

,  y =

3a - 2g + w

3

3

and z = w - a.

6. Olefiant gas, carburetted hydrogen and carbonic oxide.

Let a = the olefiant gas, y = the carburetted hydrogen, and z = equal the carbonic oxide, g = the oxygen entering into combination, and a = the carbonic acid produced; also w = the whole volume as before.

Then we have x + y + z

=

w,

3x + 2y + ½z

=

g,

and 2x + y + z

=

a.

Whence

x =

a - w,

y =

4w - 5a + 2g,

3

and

z =

⅔(w + a - g).

7. Superolefiant gas,[29] carburetted hydrogen, and carbonic oxide.

Let x = volume of superolefiant, y = volume of carburetted hydrogen, z = volume of carbonic oxide, g = the oxygen combining, a = carbonic acid produced, and w = volume of mixed gas.

Then      x + y + z

=

w,

4½x + 2y + ½z

=

g,

and 3x + y + z

=

a.

Whence x =

a - w

2

y =

3w - 4a + 2g

3

and z =

3w - 4g + 5a

6

8. Superolefiant gas, carburetted hydrogen,

carbonic oxide, and hydrogen.

This is the mixture of gases obtained by a red heat from coal and oil, after being freed from carbonic acid, &c., by the usual means.

This mixture requires a very complicated formula, in consequence of the specific gravities of the gases entering into the calculus. The importance of the subject however may be an apology for the labour.

Let x   =

vol. of superolefiant,  S its sp. gr.

y   =

vol. of carb. hydrogen, f its sp. gr.

z   =

vol. of carbonic oxide, c its sp. gr.

& u   =

vol. of hydrogen,   s its sp. gr.

C = specific gravity of the mixture, g = oxygen, a = carbonic acid, and w = whole volume of mixture as before.

Then we have x + y + z + u   =

w

4½x + 2y + ½z + ½u   =

g

3x + y + z   =

a

and Sx + fy + cz + su   =

Cw.

Whence u =

(3S + 5c - 8f)a - (4c - 4f)g - (3S + 6C - 6f - 3c)w

8f + c - 3S - 6s.

The value of the hydrogen being obtained, it may be subtracted from w, and the remainder will be best divided into three portions, by the preceding formula.

HEAT PRODUCED BY THE

COMBUSTION OF GASES.

Subsequent experience to that detailed at page 77, Vol. 1. has furnished the following more correct results of the heat produced by the combustion of pure gases.

Hydrogen, combustion of it raises an equal volume of water

5°

Carbonic Oxide

4½

Carburetted Hydrogen, or Pond Gas

18

Olefiant Gas

27

Coal Gas (varies with the gas from 10° to)

16

Oil Gas (varies also with the gas from 12° to)

20

Generally the combustible gases give out heat nearly in proportion to the oxygen they consume. See note at the end of Vol. 4, new series of the Manchester memoirs.

ABSORPTION OF GASES

BY WATER, &c.

This curious subject has attracted much less attention than it deserves. Very little has been published relating to it since the time of Dr. Henry’s essays and my own, now more than twenty years ago. The only author I remember is M. Saussure of Geneva, who published a similar essay about twelve years afterwards. See Thomson’s Annals of Philosophy, Vol. 6. He investigates the quantities of gases absorbed by various solid bodies, in a manner which I do not fully comprehend; he then treats of the absorption of gases by liquids, adverting at the same time to Dr. Henry’s experiments and mine. My enquiries were principally confined to one liquid, water; but I made a few trials with others, such as weak aqueous solutions of salts, alcohol, &c., and observing no remarkable differences, I concluded somewhat too hastily that “most liquids free from viscidity, such as acids, alcohol, &c., absorb the same quantity of gases as pure water.” Manchester memoirs, new series, Vol. 1. M. Saussure however asserts that there are considerable differences in liquids in this respect. He finds sulphuretted hydrogen to be more absorbable by water than Dr. Henry and I did; in this I find he is right. Water takes about 2½ its bulk of this gas when pure; and it seldom had been obtained unmixed with hydrogen when Dr. Henry and I made our experiments upon its absorption. In regard to carbonic acid, nitrous oxide, and olefiant gas, M. Saussure nearly agrees with us; but his results with oxygen gas, carbonic oxide, carburetted hydrogen, hydrogen and azote, would prove that water absorbs twice the quantities of each that we have assigned. I have no doubt he is wrong in the less absorbable gases. In the case of absorption of mixed gases, Saussure has given four examples, in which he finds the results to militate against my theoretic view, as stated at page 201, Vol. 1.; namely, that water takes the same quantity of each in a mixed state as it would do if they were separate, and in other respects in like circumstances. But I have shewn in the Annals of Philos. Vol. 7, 1816, that his results coincide as near as any one can expect with the views which I have all along taken of this subject.

It will be seen, page 173, that another gas has been found to coincide with olefiant gas in absorbability; namely, phosphuretted hydrogen.

FLUORIC ACID.—DEUTOXIDE OF HYDROGEN.

In treating of Fluoric acid, (Vol. 1, page 277) we came to the conclusion that this acid was probably constituted of two atoms of oxygen, and one of hydrogen, and have figured it accordingly (Plate 5, fig. 38). Subsequent experience however has shewn that deutoxide of hydrogen, though it can be formed synthetically, is not the same thing as fluoric acid. We are indebted to M. Thenard for the discovery of this curious compound, the deutoxide of hydrogen or oxygenated water. An ingenious memoir on the subject was published by him in 1818, in which the formation and the properties of this compound are fully detailed. I had no small satisfaction in 1822, when at Paris, in being obligingly favoured by M. Thenard with a view of the process of the formation, and of the more distinguishing properties of this singular liquid.

The nature of fluoric acid is still enveloped in obscurity. My experience led me to adopt the composition of fluate of lime to be 40 acid and 60 lime per cent. I had not then seen Scheele’s admirable essay on the subject. From the 5th section of his 2d. essay on fluor mineral, 1771, it may be deduced that fluate of lime is composed of 72.5 lime and 27.5 acid per cent. In 1809 Klaproth, and near the same time, Dr. Thomson found about 67½ lime and 32½ acid per cent. in fluor spar. They both erred, no doubt, as I did, by not repeating the treatment of the mineral with sulphuric acid often enough. Since then most authors, as Davy, Berzelius, Thomson, &c., agree with Scheele nearly, in assigning 27.5 acid, and 72.5 lime, in 100 parts of fluate of lime. My experience in 1820 gave me 1 per cent. less of lime; and Dr. Thomson now finds about 1 per cent. more of lime than Scheele’s analysis gives.

If we estimate the atom of lime at 24, that of fluoric acid must be about 9, according with the above proportion; this is much below 15, the weight of an atom of deutoxide of hydrogen.

Should Sir H. Davy’s view of fluate of lime be found correct, its atomic constitution would be one atom of calcium, the metallic substance of which lime is the protoxide, and one atom of fluorine, the name he has assigned to the other element, which with hydrogen is supposed to constitute the fluoric acid. The atom of fluor spar would then be 1 atom of calcium, 17, united to one atom of fluorine 16.

MURIATIC ACID.—OXYMURIATIC ACID, &c.

From the articles muriatic acid and oxymuriatic acid in the former volume, published now 16 years ago, as well as from the appendix to said volume, in which sundry animadversions are found on the fluctuating opinions entertained in regard to these acids, the reader will not be surprised to find some further addition.

Three notions have been submitted to the public in the last twenty years in regard to the nature of muriatic acid. First, the gas detached from common salt by sulphuric acid has been thought to be the acid in a state of purity, and constituted of a certain base or radical united to oxygen; this was the notion inculcated in the articles alluded to above. Second,—it is stated as a fact that when oxymuriatic acid and hydrogen in equal volumes are united by the electric spark, a volume of muriatic acid gas is the result equal to the sum of both the other volumes, and that this gas perfectly agrees with the gas obtained from common salt by sulphuric acid; this suggested the idea that muriatic acid gas is a compound of what has been called real or dry muriatic acid one atom, and water one atom. And, third, it is argued, that the element we have called oxymuriatic acid gas, is, for aught that appears, a simple body, and consequently, that muriatic acid gas is the real acid, and is constituted as above, of one atom of hydrogen, and one atom of oxymuriatic acid (now called chlorine.) It is not intended here to enter into a discussion of the arguments and facts adduced in support of the different conclusions. More experience must be had before all the doubts and difficulties are removed from the subject. But it will be proper to illustrate these different positions by an example. For instance, common salt, muriate of soda or chloride of sodium. By the first notion 50 parts of dry common salt will consist of one atom of muriatic acid gas, 22, and one atom of caustic soda, 28. By the second notion the same salt will be formed of 30 parts of muriatic acid gas, and 28 of caustic soda; but 8 parts of water evaporate when the salt is dried. By the third view common salt consists of oxymuriatic acid, or chlorine and sodium, or the metal of which caustic soda is the protoxide; and 50 parts of salt will consist of 29 chlorine and 21 sodium, or one atom of each.

NITRIC ACID—COMPOUNDS OF AZOTE AND OXYGEN.

Since the account of nitric acid (Vol. 1, page 343) was printed, a change has universally taken place in estimating the weight of the nitric acid atom, and of the proportion of azote and oxygen in the same. This has been effected chiefly by a more correct analysis of nitre than existed at that time. Nitre is now found to consist nearly of 52 parts acid and 48 parts potash per cent. Hence if the atom of potash be 42, that of nitric acid must be 45; for, 48 ∶ 52 ∷ 42 ∶ 45, nearly. That is, the nitric acid atom consists of 10 azote + 35 oxygen by weight; or of 2 atoms of azote (according to my estimate) and 5 of oxygen. There appear to be two nitrous acids; namely, the one which I have designated by that name, which may now be called subnitrous, or as Gay Lussac terms it pernitrous; and the other what I considered as nitric acid in the former volume, composed of 1 atom azote, and 2 of oxygen.

Real nitric acid then is that combination which is effected by uniting oxygen with a minimum of nitrous gas; or 1 measure of oxygen with 1.3 nitrous gas, (See Vol. 1, page 328). The oxynitric acid, which I was led to infer from the last mentioned combination, (1 azote with 3 oxygen) does not appear to exist. The Table of nitric acid (Vol. 1, page 355) will require some correction. An increase of about 4 per cent. should be made, I apprehend, on the quantities of acid corresponding to the several specific gravities.

Since my former volume of Chemistry was printed, several essays on the compounds of azote and oxygen have been published, with some new and some additional experiments, the chief of which may be seen in Sir H. Davy’s Elements of Chemical Philosophy, the Annales de chimie et de physique, Vol. 1; Annals of philosophy, Vol. 9 and 10; and the Manchester Society’s Memoirs, Vol. 4, second series; also Dr. Thomson’s first principles of Chemistry. Notwithstanding all that has been written on the subject, there still appears uncertainty as to the number of combinations formed by these two elements, their relative weights, and the number of atoms in the several compounds.

The results of an experiment I lately made on the decomposition of nitrate of potash by heat seem to be worthy of record, as I am not acquainted with those of any other person who has pursued the experiment to the same extent.—I took an iron retort of 6 cubic inches capacity, and cleaned it as well as I could from carbonaceous matter which it had previously contained, first by heating nitre to redness for an hour or more in it, and then washing it repeatedly with water till the liquid came out tasteless, and only mixed with a little red rust; I then put in 480 grains of purified nitre, and having secured a copper tube to the retort so as to be air tight, the retort was put into a fire and gradually raised to a red heat, and the fire was occasionally urged with a pair of bellows, in order to keep up a glowing red on the retort for nearly two hours; the air was received over water in jars; the first 4 or 5 inches were thrown away, and the rest was preserved and transferred to a graduated jar; the products were examined in successive portions as under, namely,

Inches.

1

produce,

85

cubic inches,

83

per cent. pure

=

70.5

2

5

77

=

3.85

3

25

50

=

12.5

4

6

30

=

1.8

Total

121

Oxygen

88.65

Oxygen

88.65

= 30 grains.

Residue

32.35

= 10 grains.

About 1 per cent. on the whole gas was carbonic acid, the rest oxygen and azote, the weights of which would be nearly as above.

Towards the last the gas came very slowly, and being of inferior quality, the operation was discontinued.

The remaining contents of the retort were diluted with water, and well washed till the water ceased to shew alkali; the liquid was then concentrated and gave 1600 water grain measures of the sp. gr. 1.153. There were obtained also 64 grains of red oxide of iron from the washing of the retort, containing 19 grains of oxygen.

The liquid was divided into portions and examined; the original nitre consisted of 250 grains of nitric acid united to 230 of potash = 480 grains. After the process there appeared to be,

10

grains of carbonic acid united to

21

grains potash.

62

grains of subnitrous acid to

84

”      ”

134

grains nitric acid to

125

”      ”

230

The quantity of carbonic acid was determined by lime water: the quantity of potash uncombined with nitric acid was found by precipitating it by tartaric acid, and manifested 105 grains of potash in the bitartrate = that combined with the carbonic and subnitrous acids; from which subtracting 21, it was inferred the remainder 84 must have been in union with subnitrous acid, or else with nitrous acid; the rest of the potash, not being acted upon by tartaric acid, was understood to be combined with nitric acid.

The quantity of subnitrous acid given above, appeared somewhat hypothetical, till it was confirmed by treating a portion of the liquid with oxymuriate of lime solution of known strength; it was found that 32 grains of oxygen were required to be combined with the subnitrous acid, in order to restore it to the state of nitric acid; that is, when oxymuriate of lime, containing that quantity of oxygen, was added to the liquid, and this was afterwards rendered acidulous by the addition of sulphuric acid, neither nitrous vapour nor oxymuriatic gas was perceptible; but a greater or less quantity of the oxymuriate being applied, and the liquid made acidulous, the fumes of the one or the other were abundantly manifest.

It remains to account for the oxygen. There were 250 grains of nitric acid at first in the nitre; of which 200 grains were oxygen and 50 azote, nearly. One-fifth part of the oxygen = 40 grains, corresponds to 1 atom of oxygen. Now the whole of the oxygen derived from the nitre in the course of the experiment, seems to be 30 grains in gas, 7 grains in the carbonic acid, and 19 grains in the iron oxide, together equal to 56 grains. Now the azote and oxygen in the gas collected, were very nearly in the proportion of those elements in nitric acid; so that a portion of the acid (about ⅙) might be considered as completely decomposed, whilst the rest was only losing a small part of its oxygen: this is remarkable, and I think indicates that the carbonic acid (formed from the carbon of the retort, or from the adhering carbon) unites to the potash, expelling the nitrous acid, which is immediately decomposed into its elements azote and oxygen. This would not however account for the whole of the azote: for, 40 grains of nitric acid would be united to 37 potash; whereas we find only 21 potash with carbonic acid; and I cannot believe that an error in the estimate of carbonate of potash could exist to that amount. The fact, however, was, that the elements of 40 grains of nitric acid were found in the evolved gas, and hence we have to account for the remainder 210 grains. From this there appears to have been expelled 26 grains of oxygen, nearly 19 and 7 as related above; of which the 19 grains cannot be correctly estimated by reason of the uncertainty as to the real quantity of oxide formed during the operation: there might be some left adhering to the retort, or on the other hand there might be more than the due share, derived from former experiments. Supposing then, that 26 grains of oxygen were extracted from the nitric acid, the remaining acid would require the same to be added to re-form the nitric; but by the experiments with oxymuriate of lime it seemed to require 32 grains of oxygen. This difference wants an explanation; I believe the greater error must belong to the 26 grains; perhaps the truth might be approximated best by supposing both to be 30 grains.

When the liquid decomposed nitre is treated with any acid, a gas is instantly expelled which produces red fumes in the air; it is pure nitrous gas, which joining with the oxygen of the atmosphere, generates nitrous acid vapour. At the same time, no doubt, the subnitrous acid is disengaged from the potash, but that part of it which is real nitrous acid (1 atom azote to 2 of oxygen) is retained by the water, whilst the other part, (1 atom azote and 1 of oxygen) assumes the gaseous form. In order to be satisfied respecting this point, I made several experiments with the liquid over mercury: taking a given portion of the liquid, and sending it to the top of a graduated tube filled with mercury, I passed up as much muriatic acid as was sufficient to engage the potash; immediately there was a disengagement of nitrous gas and carbonic acid gas, and afterwards a slow evolution of gas, evidently arising from the liquid in contact with the mercury. Wishing to ascertain the quantities, I sent up 25 grain measures of liquid, and to that nearly half its bulk of muriatic acid; in 2 or 3 minutes there was,

1.1

cubic inch of gas.

H.

M.

1.4

in   0

45

1.5

1

5

1.7

2

45

1.75

7

45

1.78

9

45

The gas was washed in lime water, and lost .33 parts of an inch of carbonic acid; the rest, 1.45 cubic inch, was nitrous gas. It is obvious that ½ of the nitrous gas, together with the carbonic acid, was liberated instantly; the rest of the nitrous gas was due to the nitrous acid, slowly acting upon the mercury. At the end of the process, there was a little black oxide floating upon the mercury. Calculating from this, the whole quantity of nitrous gas would be 31 or 32 grains, whereas it ought to have been 48 grains to constitute 62 of subnitrous acid. It is probable that whilst a portion of the subnitrous acid is oxidizing the mercury, another portion may be forming nitric acid and dissolving the oxide.

From some trials, I have reason to think that even carbonic acid will expel nitrous gas from the liquid sub-nitrite of potash.

In the essay of Dr. Henry, already alluded to, published in the 4th Vol. of the Manchester Society’s Memoirs, a new and interesting discovery is made; namely, that a mixture of nitrous and olefiant gases, though not explosive by an electric spark, may still be exploded by the more powerful impetus of a shock from a charged jar. Dr. Henry has adduced the results obtained in this way, as corroboratory of those which shew the constitution of nitrous gas to be 1 volume of azote and 1 of oxygen united to form 2 volumes of nitrous gas. (See page 507 of the Memoirs.)

Some time ago in repeating these experiments of Dr. Henry, I found some extraordinary circumstances attending them. After determining that 1 volume of olefiant gas may be fired with from 6 to 10 volumes of nitrous, I found a shock from a jar sometimes inadequate to fire the mixture, which, however, when repeated a second or third time, succeeded. This is not a novelty; for, mixtures of olefiant gas as well as other gases and vapours, with a minimum of oxygen, frequently require several sparks before the explosion: but this case occurs at times with nitrous and olefiant gas, when they are mixed in the most favourable proportions for exploding. The most remarkable circumstance, however, was, that when a phial was filled with the mixture of the two gases in the proportion of 1 volume olefiant to 6 or 7 nitrous, (exclusive of small portions of azote), the decomposition of the nitrous gas and the combustion of the olefiant were scarcely ever perfect; and what increased the perplexity more, was, the results obtained from the same mixture scarcely ever agreed one with the other. After about 30 experiments, I was inclined to adopt the conclusion, that the uncertainty was occasioned by the oblong form of the eudiometer. The spark or shock, in my eudiometer, is imparted at one extremity of a column of air, which is often 10 times as much in length as in diameter: it mostly was found that the larger the quantity of mixture exploded at once, the more imperfect and incomplete was the combustion. I imagine the intensity of heat is not sufficient to carry on the combustion through the length of the column, owing, perhaps, to the cooling power of the sides of the tube. Hence it was, I apprehend, that in one or two instances, when a small quantity of gas was used, I got nearly complete results, as Dr. Henry reports his; but in the majority both gases were found in the residue after the explosion.

In pursuing this enquiry into the decomposition of nitrous gas by combustible gases, I found that it might be effected by any combustible gas or vapour: at least it succeeded in all I tried. The method I pursued, and which was suggested by the known properties of phosphuretted hydrogen, is this: it has been shewn (page 181) that a mixture of phosphuretted hydrogen and nitrous gas exploded by an electric spark, the former gas being completely burned in case the proportions are duly adjusted; now, it occurred to me, that as the above combustible gas is usually a mixture of pure phosphuretted hydrogen and of hydrogen, and that the latter of these is also burned as well as the former, the effect must be produced through the heat occasioned by the combustion of the former. Having some old phosphuretted hydrogen by me, at the time, which on examination, I found to be 91 per cent. combustible gas, and 9 azote; and the 91 combined with 156 of oxygen, consequently was 74 pure, and 17 hydrogen; I tried this mixture with nitrous gas, when it exploded by the spark, as usual; but on trying it with an excess or defect of nitrous gas, the spark was inefficient, but the shock instantly fired the mixture. As there did not appear to be any of the pure hydrogen left unburned in these experiments, I proceeded to mix the old phosphuretted hydrogen with hydrogen; and then this new mixture with nitrous gas. The first experiment was made with 4 parts of old phosphuretted hydrogen + 16 hydrogen + 36 nitrous gas = 56 total. On this mixture the spark, of course, had no effect; but it exploded the first trial by the jar, and left 20 measures, of which 2 were found to be oxygen, and the rest azote. This experiment succeeding so well, I next tried mixtures of phosphuretted hydrogen, with carbonic oxide, carburetted hydrogen, and ether vapour successively, along with nitrous gas; and found that all these mixtures refused combustion by the spark, but were instantly exploded by the shock, yielding carbonic acid and water, the same as if the combustion had been effected by free oxygen. In some instances the combustion was complete, leaving neither combustible gas nor nitrous gas; but generally there was a residue of one or both of the gases.

From these experiments it may be concluded that the heat, produced by the combustion of phosphuretted hydrogen and nitrous gas or oxygen gas, disposes other gases, accidentally in the mixture, to chemical changes. In conformity with this view, I mixed phosphuretted hydrogen and oxygen, in the proportion of mutual saturation; and taking a small proportion of this mixture, and as much ammoniacal gas as would saturate the phosphoric acid to be formed, I found that causing an explosion over mercury, the phosphoric acid combined with the ammonia, and nearly the whole gas disappeared. In this case, the heat was not sufficient to decompose the ammonia. But in another experiment, with a portion of the same explosive mixture and a less proportion of ammonia, after the firing a residue of azote and hydrogen was found, amounting nearly to the quantity due from the decomposition of the ammonia. Here the heat produced, had evidently decomposed the ammonia.

ON AMMONIA.

The constitution of ammonia still remains undecided. The latest experiments on this article are those of Dr. Henry, in his essay on the analysis of the compounds of nitrogen. (Memoirs of the Manchester Society, vol. 4, 1824.) By electrifying ammoniacal gas over mercury, as carefully as could be devised, Dr. Henry found results as under:

1st

experiment

44

measures became

88+

2d

157

320

3d

60

122

4th

120

240

The evolved gases carefully analysed by combustion with oxygen, were found to consist of 3 volumes of hydrogen and 1 of azote. The analysis of ammonia was also effected by exploding it with nitrous oxide, with the requisite precautions. The results confirmed the previous ones by electricity, both in regard to doubling the volume of ammonia, and establishing the ratio of 3 to 1 in the volume of hydrogen and azote.—These experiments are highly interesting as far as regards the question of ammonia, as they exhibit the latest investigations of one who has previously shewn uncommon skill and perseverance in this kind of analysis. (See Philos. Transact. 1809, &c.)

Dr. Henry’s analysis of ammonia, in 1809, has been adverted to in our article on the subject, vol. 1, page 429. The results of that Essay are given in a tabular form; and the mean of six experiments was nearly as we have stated, namely, that ammonia consists of 27¼ measures of azote, and 72¾ hydrogen. To this it may be proper to add, that the two extremes were, 26.1 azote and 73.9 hydrogen, and 28.2 azote with 71.8 hydrogen; also that a small error has crept into the table, which being corrected, the average results are reduced to 27 and 73, very nearly. Subsequently, both Dr. Henry and Sir H. Davy concurred in assigning 26 and 74 for the most approximating numbers. (See Nicholson’s Journal, 25, page 153). The true quantity of gases procured by the decomposition of ammoniacal gas by electricity, was concluded by both these authorities, to be 180 for each 100 of ammonia, when the requisite precautions were taken, as we have related in vol. 1.

From what is stated above, it is evident the subject is one which requires extraordinary skill and attention. This I can attest from my own experience, which has been frequently renewed and varied; but the results have not been sufficiently accordant to yield me satisfaction.

About ten years ago, I made several experiments on the decomposition of ammonia, which, though they are not convincing, deserve, perhaps, to be recorded in their results.—Some more recent experiments are incorporated with them.

Decomposition of ammonia by nitrous oxide.—I made many experiments, by exploding mixtures of nitrous oxide and ammoniacal gases over mercury. The excess of gas was mostly on the side of ammonia, but the proportions were varied in the different experiments, from 10 vol. nitrous oxide to 11 ammonia or to 5, which are about the extremes capable of being fired by the electric spark.

When 10 parts nitrous oxide and 5 of ammonia are exploded over mercury, the residuary gas contains some free oxygen and some nitrous acid derived from the decomposition of the excess of nitrous oxide used; with 6 parts of ammonia there is rarely any free oxygen. When 10 parts of nitrous oxide, and 7 of ammonia are fired, I never found any free oxygen or hydrogen; but when the ammonia is at or near 8 parts, I find from ¹/₂₀ to ⅒ of the hydrogen from the ammonia in the residuary gases. The two gases appear to be completely decomposed; the oxygen of the nitrous oxide, as far as it can, unites with the hydrogen of the ammonia, without forming any portion of nitrous acid or of free oxygen, and the residue contains the azote of both gases, and the unburnt hydrogen from the ammonia, as Dr. Henry first observed. This continues to be the case till the ammonia becomes 11 parts, when the hydrogen amounts to about ⅓ of the whole quantity which the ammonia yields.

From the above it would seem that the proportions for mutual saturation must be 10 nitrous oxide with from 7 to 8 parts of ammonia. This agrees with the deduction in Dr. Henry’s first essay that 13 nitrous oxide require 10 of ammonia; or that 10 require 7.7: but according to the theory of volumes 10 would require 6⅔; and Dr. Henry recommends in his late essay 10 nitrous oxide to 7.7 or 8⅓ parts of ammonia, in order to secure a small excess of the last, and consequently some free hydrogen after the explosion. The former of these proportions would have nearly ⅐ of the residue hydrogen, and the latter nearly ⅕, supposing the gases pure originally. This gives more hydrogen than I have ever found; but the azote in my experience nearly agrees with the doctrine of multiple volumes.

Decomposition of ammonia by nitrous gas.—About 30 experiments carefully made on mixtures of nitrous gas and ammoniacal gas gave very discordant results. At one time 10 parts nitrous gas with 14 ammonia gave ⅓ of hydrogen in excess, and another time 10 nitrous with 12 ammonia gave excess of hydrogen = ⁹/₂₀; generally 10 parts with 6 or less gave oxygen, and 10 with 8 or more gave hydrogen in the residue.

Decomposition of ammonia by oxygen.—The limiting proportions of oxygen and ammonia which I have fired, are 10 oxygen to 4 ammonia for the minimum, and 10 oxygen to 22 ammonia for the maximum. When 10 oxygen were fired with 4 ammonia, there were ²⁵/₃₇ of the oxygen left, and there was a deficiency of azote amounting to ¹/₁₂ of what was expected from the ammonia, owing no doubt to nitrous acid generated by the explosion. When 10 oxygen to 1.8, or from that to 2.2 ammonia are used, there is a surplus of about ¼ or ⅓ of the hydrogen contained in the ammonia, left in the residue of the gas. When the ammonia is between 13 and 14 there is usually a trace of oxygen or hydrogen as it approaches either of these limits. By the theory of volumes, 10 oxygen should saturate 13⅓ of ammoniacal gas. I have not any instance of hydrogen being left when 14 ammonia were used, though there ought to be ¹/₂₀ of the whole left; and much smaller quantities than that are appreciable by well known methods. The azote resulting from the decomposition of ammonia is usually very nearly ½ the volume of the ammonia.

On the whole the results from firing ammonia and oxygen gas appear to me more satisfactory than those obtained from nitrous oxide and nitrous gas, as they are more simple and less perplexed with any theoretic views.

It may be proper to remind the reader that when we speak of 10 parts of one gas uniting with 8, 10, or more, of another in the above and other cases, it is to be understood of gases absolutely pure; not that we ever obtain them in that state, but approximating as near as we can to it, we mix given portions of such gases as we can obtain, and then in our calculations of results deduct for the impurities.

One source of uncertainty in these experiments on firing mixtures of ammonia, is that the real quantity of ammoniacal gas operated upon is not known. If a certain measure of ammonia be transferred through mercury ever so dry, some portion of it gets entangled in the mercury, and 100 measures become perhaps 95: now in the explosion it is a question whether any part of the 5 measures absorbed is decomposed. I have marked this attentively, and am persuaded that generally speaking, little if any of that portion is decomposed; but some trace of it appears mostly afterwards in the residue as it is liberated from the pressure of its own kind of gas, and hence easily rises into the gaseous mixture. Notwithstanding, when the loss of gas by transfer amounts to 10 or 20 per cent., I have reason to believe that some part of it suffers combustion occasionally.

Volume of gases from the decomposition of ammonia.—It has been observed (vol. 1. Ammonia) that Sir H. Davy obtained 180 measures of gases, by means of electricity, from 100 of ammonia as the maximum when the operation was performed with great care, and Dr. Henry in like circumstances, produced 181, whilst I found 187 measures; since that, as has been related, Dr. Henry has found 200 measures. It is not easy to account for these differences; I am inclined to the opinion that the volume of gases is very nearly doubled, but probably rather less than more. I find the experiments on the rapid combustion of ammonia agree best with that opinion.

Decomposition of ammonia by a red heat.—A short time since I repeated the decomposition of ammonia by passing the gas through a red hot copper tube. The proportion of azote to hydrogen, due allowance being made for a minute portion of atmospheric air, was upon the average of a number of experiments, 26 of the former to 74 of the latter.

Decomposition of ammonia by oxymuriatic acid.—I have made several experiments on this mode of decomposition since the results published in vol. 1, page 435. It is well known that a solution of oxymuriate of lime decomposes ammoniacal salts; water and muriatic acid are produced, azote liberated, and the acid previously combined with the ammonia is evolved. But this is not all; an excessively pungent gas or perhaps vapour is produced, exciting sneezing, and inducing catarrh; the constitution of this vapour is not well understood; it is never formed, as far as I know, without the presence of both oxymuriatic acid and ammonia. The results of such mixtures are of course complicated and likely to be unsatisfactory; it may notwithstanding be useful to relate some of them.

When clear oxymuriate of lime solution, and a salt of ammonia are mixed together with a little excess of oxymuriate, the ammonia is mostly decomposed, the oxymuriate being converted into muriate of lime by the hydrogen of the ammonia, whilst the azote is evolved, and the acid previously combined with the ammonia is liberated; hence oxymuriatic acid gas is also liberated along with the azote; and it is required to be taken out before the azote can be estimated. This circumstance may be obviated by previously adding the requisite quantity of pure potash or soda, to engage the acid, or by leaving a little undissolved lime in the oxymuriatic solution. I could never obtain a volume of azote equal to half that of the ammonia (supposed to be in a gaseous state) though it is universally allowed not to be less than that, if the whole of the azote be evolved; on one occasion only I got so much as ¹⁴/₁₅ of that quantity. The residue of liquid has the extremely pungent smell; but the azotic gas after passing through pure water has no smell. When this experiment is made over mercury, the oxymuriatic acid acts upon it, and hence the excess of oxymuriate should be such as to leave a portion of that undecomposed at the conclusion.

When the object is to ascertain the hydrogen in ammonia, a portion of salt known to contain a given weight of ammonia is to be treated with oxymuriate of lime solution, the strength of which is accurately determined by means of green sulphate of iron, or otherwise. The ammoniacal salt in solution is then to be mixed with a moderate redundance of the oxymuriate liquid, and with a few drops of caustic potash, and the mixture must be repeatedly agitated for some time. At length the liquid must be tested by the green sulphate of iron, and hence the quantity of acid spent upon the ammonia will be determined. I have mostly found the hydrogen this way below the common estimate, allowing the ammoniacal salts to be correctly determined.

SULPHURET OF CARBON.

Since the article at page 462, vol. 1, was written, an excellent essay on the sulphuret of carbon has been published in the Philosophical Transactions, (1813) by Professor Berzelius and Dr. Marcet. After an extensive series of experiments, they infer the atom of the sulphuret to consist of 2 atoms sulphur and 1 of carbon. The investigation did not seem to warrant their including hydrogen in the atom. I have made several experiments on the combustion of the vapour of sulphuret of carbon in oxygen gas by electricity. My method generally was, to vapourize a given portion of atmospheric air over mercury, taking care that the vapour was below the maximum for the temperature; this is easily effected by putting the liquid into a phial of air, drop by drop, and inverting it over mercury till the liquid is evaporated. This vapourized air, I find may be transferred through mercury with very little loss, and even through water several times, without a total condensation of the vapour. The vapour of ether is much more condensible by water than that of sulphuret of carbon. A given portion of this vapourized air is to be mixed with oxygen gas, in Volta’s eudiometer, and then exploded by the electric spark over mercury. One volume of vapour combines with nearly 3½ of oxygen, and therefore requires 4 or 5 times its bulk of that gas before firing, in order that the combustion may be complete. The results of the combustion are carbonic acid and sulphurous acid; and I suspect a small portion of water; though Professor Berzelius and Dr. Marcet could not detect any.

By evaporating a given weight of the sulphuret of carbon, in a given volume of atmospheric air, at the temperature of 60°, I find the specific gravity of the vapour to be 2.75 nearly, air being 1. Now if we assume the atom of vapour to be nearly of the same volume as that of hydrogen, and to consist of 1 atom hydrogen, 2 sulphur, and 1 carbon, it will require 7 atoms of oxygen to form water, sulphurous acid, and carbonic acid, which will accord very well with my experience. When vapourized hydrogen gas is electrified for some time, there is no change of volume, though there is some appearance of decomposition. Probably the hydrogen of the sulphuret is liberated. It is difficult to conceive how so volatile a liquid as the one in question, could be constituted out of sulphur and carbon without the addition of hydrogen.

POTASSIUM, SODIUM, &c.

Two views of the nature of these bodies have been given in vol. 1, (see pages 260, and 484, &c.). In the former they are considered as simple metals; in the latter, as compound bodies resulting from the abstraction of oxygen from the hydrates of potash and soda; or as being constituted of 1 atom of hydrogen united to 1 atom of pure potash or soda respectively. Those who have had the most experience on these elements, Sir H. Davy, and M. M. Gay Lussac and Thenard, seem now to concur in the former view, and it has been adopted by most chemists. Part of the objections which we made to this view have been obviated, it should seem, by establishing the fact, that oxymuriatic gas and hydrogen gas united, form muriatic acid gas. There are still, however, difficulties to remove before this view can be considered perfectly satisfactory; but they are not greater perhaps than would attach to any other explanation of the facts connected with the subject. Besides potassium and sodium, experience as well as analogy would seem to render probable, if not to establish, the existence of barium, strontium, and calcium as metals, of which barytes, strontites, and lime are the protoxides, as potash and soda are of the other two metals; (other oxides of potassium and sodium are stated, see page 55-57); barium has a deutoxide, and probably calcium likewise. The rest of the earths, as magnesia, alumine, silex, &c. are by analogy considered by most chemists as oxides of particular metals, but the proportions of their elements have not been determined.

ALUM.

At page 531, vol. 1, we have given the constitution of this important salt, as under: since that time Mr. R. Phillips has announced another view of it; and Dr. Thomson has published one differing from both of these. They are as follow:

Dalton—

1 atom sulphate of potash.

4 atoms sulphate of alumine.

30 atoms water.

Phillips—

1 atom bisulphate of potash.

2 atoms sulphate of alumine.

22 atoms water.

Thomson—

1 atom sulphate of potash.

3 atoms sulphate of alumine.

25 atoms water.

Notwithstanding these differences, there is a near approximation in all three, in regard to the quantities of acid, alumine, potash, and water in the salt. This is accounted for partly in the different relative weights of the atoms, as estimated by the different analysts, but chiefly in that of alumine.

Some very curious results occurred to me about 10 years ago in analysing alum; they were new to me, but I have since found they had been previously discovered by Scheele. (See his essay on silex, clay, and alum, 1776.) As his observations are not to be found in any of our elementary books that I have seen, I shall give the particulars of my own experiments here.

I take 24 grains of alum and dissolve them in water; of these 8 grains may be allowed for sulphuric acid, ⅕ of which = 1.6 grain = 1.1 grain of lime = 880 grains of lime water, such as I commonly use. To the solution of alum I put 880 grains of lime water; a slight precipitate appears which soon becomes redissolved almost completely. The liquid is then acid by the colour test.

To this liquid I put 880 more of lime water, and agitate; a copious precipitate appears and continues; after subsidence the clear liquid is still acid by the colour test.

Another 880 grains are added, and the whole is then well agitated; the agitation is repeated two or three times after the precipitate has partly subsided, so as to diffuse it equally again through the liquid; finally, the clear liquid is found to be neutral by the colour test, and to contain no alumine; for, lime water produces no precipitate when poured into it.

Another 880 grains being added, and the whole stirred well, the clear liquid after the subsidence of the precipitate is still neutral by the colour test.

The fifth portion of 880 grains being then added, and the mixture well agitated, a considerable portion of the precipitate will evidently disappear, and the mixture become semitransparent; after a time the clear supernatant liquid is found strongly alkaline; a little of it touched with an acid becomes milky, and adding more acid clears it again. The liquid is now 1.0025 sp. gr., or a little heavier than lime water.

The sixth portion of 880 grains being now added to the whole mixture, and agitated, the precipitate rather diminishes, and an increase of specific gravity takes place in the liquid; it is now 1.003.

The seventh and last portion of 880 grains being added to the mixture, and agitation being continued for some time, a dense bulky precipitate is formed, which falls with great celerity, carrying with it the greatest part of the acid, the alumine and the lime, and leaving the liquid of the sp. gr. 1.0012. It is a subsulphate into which acid, potash, lime and alumine enter, as will be shewn.

These phenomena appear to me to be best explained by adopting a constitution of alum, such as to make it consist of 1 atom bisulphate of potash and 3 atoms of sulphate of alumine; after which the following explanation will apply.

The first portion of lime water saturates the excess of acid.

The second portion throws down a correspondent portion of alumine. The clear liquid is acid, because it contains sulphate of alumine, which is essentially acid by the colour test, because alumine is not an alkaline element.

The third portion throws down another portion or atom of alumine; but by continued agitation the two atoms of alumine liberated, join the remaining atom of sulphate of alumine, and the whole compound falls down, being then the common subsulphate of alum. Hence the liquid, containing nothing but sulphate of lime and sulphate of potash, is neutral by the test, and yields no alumine by the addition of lime water.

The fourth portion of lime water being put in and duly agitated, the atom of sulphuric acid is drawn from the subsulphate to join the lime, and then the floating subsulphate of alumine becomes pure alumine, and the clear liquor is still neutral.

The fifth portion of lime water tries to decompose the sulphate of potash, but is unable of itself; however, the floating alumine assists it, and by double affinity the potash leaves the acid to join the alumine, and the lime takes the acid. Hence as ⅓ of the alumine enters into solution with the potash, the precipitate is less copious, and the liquid is alkaline; a small portion of acid put into the clear liquid engages the potash, and liberates the alumine, but a larger portion redissolves the alumine also.

The sixth portion of lime water seems to complete the effect which the fifth commences, and hence the density of the liquid increases, whilst the precipitate rather diminishes.

The seventh portion of lime, together with the sixth, after due agitation and some time, unite the lime with the alumine, one atom of each, and form a precipitate which would fall together, were no other compound present, as I found, and Scheele before me; but if sulphate of lime be present, each compound atom of lime and alumine, unites with one of sulphate of lime, and the whole descends together, forming a subsulphate resembling that of alum, only two atoms of lime are found as substitutes for two atoms of alumine. This subsalt is very little soluble in water.

According to this view, if 2 atoms of alum were decomposed, 4 atoms of subsulphate would be formed, each consisting of 1 acid, 2 lime, and 1 alumine; also 2 compound atoms of potash and alumine, and 6 atoms sulphate of lime. But in the final arrangement, it would seem, that 2 atoms of sulphate of lime are again decomposed, and sulphate of potash formed, the 2 atoms of lime combining with the 2 of alumine, and then two more atoms of subsulphate are formed, and the final arrangement is 6 atoms subsulphate precipitated, and 2 atoms sulphate of potash, and 2 sulphate of lime remain in solution.

The facts above stated appear to me to place the constitution of alum in a clearer point of view than any other I have seen. They make no difference in the weights of the several elements in 100 grains of the salt, from what we have given in Vol. 1; only the weight of the atom of alumine is here taken to be 20 instead of 15, and we have 3 atoms of it in 1 of alum, instead of 4, as in the former account.

ON THE PRINCIPLES OF THE ATOMIC SYSTEM

OF CHEMISTRY.

It is generally allowed that the great objects of the atomic system are, 1st to determine the relative weights of the simple elements; and 2d to determine the number, and consequently the weight, of simple elements that enter into combination to form compound elements. The greatest desideratum at the present time is the exact relative weight of the element hydrogen. The small weight of 100 cubic inches of hydrogen gas, the important modifications of that weight by even very minute quantities of common air and aqueous vapour, and the difficulties in ascertaining the proportions of air and vapour in regard to hydrogen, are circumstances sufficient to make one distrust results obtained by the most expert and scientific operator. The specific gravity of hydrogen gas was formerly estimated at ⅒ that of common air; it descended to ¹/₁₂.₅, which is the ratio we adopted in the Table at the end of Vol. 1. it is now commonly taken to be ¹/₁₄.₅, and whether it may not in the sequel be found to be ¹/₁₆.₅ is more than any one at present, I believe, has sufficient data to determine. The other factitious gases have mostly undergone some material alterations in their specific gravities in the last twenty years, several of which I have no doubt are improvements; but when we see these specific gravities extended to the 3rd, 4th, and 5th places of decimals, it appears to me to require a credit far greater than any one of us is entitled to. In the mean time, it may be thought a fortunate circumstance, that the weight of common air has undergone no change for the last thirty or forty years; 100 cubic inches bring estimated to weigh 30.5 grains at the temperature of 60°, and pressure of 30 inches of mercury: (whether this is exclusive of the moisture I do not recollect.) It is also a fortunate circumstance, (provided it be correct) that this weight is nearly free from decimal figures. I may be allowed to add, that according to my experience, the weight of 100 cubic inches of air is more nearly 31 grains than 30.5. I apprehend these observations are sufficient to shew that something more remains to be done before we obtain a tolerably correct table of the specific gravities of gases; the importance of this object can not be too highly estimated.

The combinations of gases in equal volumes, and in multiple volumes, is naturally connected with this subject. The cases of this kind, or at least approximations to them, frequently occur; but no principle has yet been suggested to account for the phenomena; till that is done I think we ought to investigate the facts with great care, and not suffer ourselves to be led to adopt these analogies till some reason can be discovered for them.

The 2d object of the atomic theory, namely that of investigating the number of atoms in the respective compounds, appears to me to have been little understood, even by some who have undertaken to expound the principles of the theory.

When two bodies, A and B, combine in multiple proportions; for instance, 10 parts of A combine with 7 of B, to form one compound, and with 14 to form another, we are directed by some authors to take the smallest combining proportion of one body as representative of the elementary particle or atom of that body. Now it must be obvious to any one of common reflection, that such a rule will be more frequently wrong than right. For, by the above rule, we must consider the first of the combinations as containing 1 atom of B, and the second as containing 2 atoms of B, with 1 atom or more of A; whereas it is equally probable by the same rule, that the compounds may be 2 atoms of A to 1 of B, and 1 atom of A to 1 of B respectively; for, the proportions being 10 A to 7 B, (or, which is the same ratio, 20 A to 14 B,) and 10 A to 14 B; it is clear by the rule, that when the numbers are thus stated, we must consider the former combination as composed of 2 atoms of A, and the latter of 1 atom of A, united to 1 or more of B. Thus there would be an equal chance for right or wrong. But it is possible that 10 of A, and 7 of B, may correspond to 1 atom A, and 2 atoms B; and then 10 of A, and 14 of B, must represent 1 atom A, and 4 atoms B. Thus it appears the rule will be more frequently wrong than right.

It is necessary not only to consider the combinations of A with B, but also those of A with C, D, E, &c.; as well as those of B with C, D, &c., before we can have good reason to be satisfied with our determinations as to the number of atoms which enter into the various compounds. Elements formed of azote and oxygen appear to contain portions of oxygen, as the numbers 1, 2, 3, 4, 5, successively, so as to make it highly improbable that the combinations can be effected in any other than one of two ways. But in deciding which of those two we ought to adopt, we have to examine not only the compositions and decompositions of the several compounds, of these two elements, but also compounds which each of them forms with other bodies. I have spent much time and labour upon these compounds, and upon others of the primary elements carbone, hydrogen, oxygen, and azote, which appear to me to be of the greatest importance in the atomic system; but it will be seen that I am not satisfied on this head, either by my own labour or that of others, chiefly through the want of an accurate knowledge of combining proportions.

NEW TABLE

OF THE RELATIVE WEIGHTS OF ATOMS.

At the close of the last volume, the weights of several principal chemical elements or atoms were given; but as several additions and alterations have been educed from subsequent experience, it has been judged expedient to present a reformed table of weights.

SIMPLE ELEMENTS.

Weights.

Hydrogen

1

Azote

5±, or 10?

Carbone

5.4

Oxygen

7

Phosphorus

9

Sulphur

13, or 14

Calcium

17?

Sodium

21

Arsenic

21

Molybdenum

21, or 42?

Cerium

22?

Iron

25

Manganese

25

Nickel

26

Zinc

29

Tellurium

29, or 58?

Chromium

32

Potassium

35

Cobalt

37

Strontium

39

Antimony

40

Iridium

42

Palladium

50

Uranium

50, or 100?

Tin

52

Copper

56, or 28?

Rhodium

56

Titanium

59?

Gold

60±

Barium

61

Bismuth

62

Platina

73

Tungsten

84, or 42?

Silver

90

Lead

90

Columbium

107? 121?

Mercury

167, or  84?

SIMPLE OR COMPOUND?

Weights.

Fluoric Acid

10? 15?

Magnesia

17

Alumine

20

Glucine

23? 34?

Lime

24

Oxymuriatic Acid (chlorine)

29, or 30

Muriatic Acid

30, or 31

Gas

Zircone

45

Silex

45?

Yttria

53? 36? 18?

COMPOUND ELEMENTS.

Weights.

Ammonia

6? 12? 13?

Olefiant Gas

6.4? 12.8?

Carburetted Hydrogen

7.4

or Pond Gas

Water

8

Phosphuretted  Hydrogen

10

Nitrous Gas

12, or 24?

Carbonic Oxide

12.4

Sulphuretted Hydrogen

15

Deutoxide of Hydrogen

15

Nitrous Oxide

17

Nitrous Acid

19, or 38?

Carbonic Acid

19.4

Sulphurous Oxide

21

Phosphoric Acid

23

Sulphurous Acid

28

Protoxide of Arsenic

28

Soda

28

Hydrate of Lime

32

Protoxide of Iron

32

Protoxide of Manganese

32

Protoxide of Nickel

33

Sulphuric Acid

35

Sulphuret of Arsenic (native)

35

Hydrate of Soda

36

Oxide of Zinc

36

Carbonate of Magnesia

36.4

Protosulphuret of Iron

39

Deutoxide of Manganese

39

Oxide of Chromium

39

Muriate of Magnesia

39

Protosulphuret of Nickel

40

Protosulphuret of Lime

41

Carbonate of Lime

43.4

Protoxide of Cobalt

44

Strontites

46

Muriate of Lime

46

Chromic Acid

46

Protoxide of Antimony

47

Carbonate of Soda

47.4

Hydrate of Potash

50

Muriate of Soda

50

Sulphate of Magnesia

52

Sulphuret of Antimony

54

Sulphate of Alumine (simple)

55

Oxide of Palladium

57

Sulphate of Lime

59

Protoxide of Tin

59

Carbonate of Potash

61.4

Hydrosulphuret of Antimony

62

Nitrate of Magnesia

62

Sulphate of Soda

63

Protoxide of Copper

63

Muriate of Potash

64

Deutoxide of Tin

66

Protosulphuret of Tin

66

Oxide of Gold

67

Barytes

68

Muriate of Lime

69

Oxide of Bismuth

69

Deutoxide of Copper

70

Nitrate of Soda

73

Sulphuret of Gold

74

Protosulphuret of Bismuth

76

Sulphate of Potash

77

Oxide of Platina

80?

Nitrate of Potash

87

Carbonate of Barytes

87

Muriate of Barytes

90

Oxide of Silver

97

Protoxide of Lead

97

Minium

98

Sulphate of Barytes

103

Deutoxide of Lead

104

Protosulphurets of Lead and Silver

104

Nitrate of Barytes

113

Protoxide of Mercury

174?

Deutoxide of Mercury

181?

Protosulphuret of Mercury

181

Alum

277

ADDENDA.

STEEL.—Since writing the article at page 214, I have had an opportunity of analysing the crystalline steel, formed by Mr. Macintosh’s process of cementation by means of coal gas. I dissolved 21 grains of this steel in sulphuric acid, with only a very slight excess of acid. The whole was dissolved except about ⅒ of a grain of silvery-like particles. The gas obtained amounted to 29.6 cubic inches. It yielded no trace of carbonic acid. When fired with oxygen it yielded 3 per cent. upon the volume of hydrogen of carbonic acid; and this arose, as I ascertained, from the hydrogen containing 3 per cent of carburetted hydrogen gas: it contained no carbonic oxide. Supposing the carbone to have been combined with the iron, it would amount only to about ⅝ of a grain, to 100 grains of iron. Whether such a quantity can be deemed an essential or an accidental ingredient of steel, may be a subject of consideration.

By a mistake of the Printer, the following paragraphs were omitted after page 308.

EXAMPLE.

According to the following values of the different specific gravities, (of the accuracy of some of which there may be doubts) and referring to my essay on oil gas (Manchester Memoirs, Vol. 4, new series, page 79,) we may take the oil gas, which, when the incombustible portion was abstracted would be nearly .812 sp. gravity, and

100 pure gas give 152 carb. acid and take 248 oxygen;

Here w = 100, a = 152, g = 248, S = 1.458, f = .555, c = .972 s = .0694 and C = .812. The value of u reduces to the following form;

u =

4.7916a - 1⅔g + 1.875w - 6Cw

= 24.5

.625

hydrogen per cent. of pure combustible gas.

Hence we have 75.5 volumes left for the 3 other ingredients = w of the formula; and abstracting 12 + from the oxygen on account of the hydrogen, g = 236, and a = 152 as above.

Whence

x =

Superolefiant = 38¼

y =

Carb. hydrg.  = 30.2

and

z =

Carb. oxide  =   7+

75.5

These results differ considerably from those deduced in the above essay; probably in part from errors in the above estimates of the specific gravities of one or more of the gases.

EXPANSION OF LIQUIDS BY HEAT.

I am not aware of any particular labour that has recently been given to the enquiry how far pure liquids accord with each other in the law which I announced as derived from the experiments on water and mercury, and corroborated by those upon several other liquids. See Vol. 1, Table of temperature, page 14; also page 36, and following.

Perhaps all liquids should be considered as pure that are subject to uniform congelation at certain temperatures on the one hand, and on the other are capable of being distilled by heat without any alteration in their constitution. Water and mercury will rank in the first place; alcohol of .82 specific gravity and ether of .72; concentrated sulphuric acid; nitric acid of 1.42 specific gravity: naphtha and oil of turpentine, &c. will probably be thought to claim the next place. It is desirable that the temperatures at which these liquids congeal should be ascertained; also whether any decomposition is effected by the operation. If these expand proportionally to a scale of square numbers for certain given equal or unequal intervals of temperature, it may point out something relative to the collocation of the ultimate particles in liquids. The apparent coincidence of this rate of expansion in liquids, with the geometrical progressive force of steams or vapours creates an additional interest. It may be that most or all of these supposed relations are accidental, and only approximative like that of the rate of expansion of air and mercury, between the temperatures of -40° and 212°; but I cannot think this probable. Even should they be only approximations, they are of sufficient utility to be kept in view.

FINIS.

Printed by the Executors of S. Russell

BOOKS, ESSAYS, &c.,

PUBLISHED BY THE SAME AUTHOR.

METEOROLOGICAL OBSERVATIONS AND ESSAYS.

4s. 8vo. 1793.

ELEMENTS OF ENGLISH GRAMMAR: or, a new System of Grammatical

Instruction, for the use of Schools and Academies.

2s. 6d. 12mo. 1801.

☞A few Copies of these Works may still be had of the

London Booksellers.

A NEW SYSTEM OF CHEMICAL PHILOSOPHY.

Part I. of Vol. I.  7s. 8vo. 1808.

Published by G. Wilson, Bookseller, Essex Street, Strand, London.

ESSAYS, by the same, in the Memoirs of the Literary

and Philosophical Society, Manchester.

VOL. 5. PART 1.—Extraordinary facts relating to the vision of colours.

PART 2.—Experiments and observations to determine whether the quantity of rain and dew is equal to the quantity of water carried off by the rivers, and raised by evaporation; with an enquiry into the origin of springs.

Experiments and observations on the power of fluids, to conduct heat, with reference to Count Rumford’s seventh essay on the same subject.

Experiments and observations on the heat and cold produced by the mechanical condensation and rarefaction of air.

Experimental essays on the constitution of mixed gases; on the force of steam or vapour from water and other liquids, in different temperatures, both in a Torricellian vacuum, and in air; on evaporation; and on the expansion of gases by heat.

Meteorological observations made at Manchester,

from 1793 to 1801.

VOL. 1. Second series.—Experimental enquiry

into the proportions of the several gases or

elastic fluids constituting the atmosphere.

On the tendency of elastic fluids to diffusion through each other.

On the absorption of gases by water and other liquids.

Remarks on Mr. Gough’s two essays on the doctrine of mixed gases; and on Professor Schmidt’s experiments on the expansion of dry and moist air by heat.

VOL. 2. On respiration and animal heat.

VOL. 3. Experiments and observations on phosphoric acid and on the salts denominated phosphates.

Experiments and observations on the combinations of carbonic acid and ammonia.

Remarks tending to facilitate the analysis of spring and mineral waters.

Memoir on sulphuric ether.

Observations on the barometer, thermometer, and rain, at Manchester, from 1794 to 1818 inclusive.

VOL. 4. On oil, and the gases obtained from it by heat.

Observations in Meteorology, particularly with regard to the dew-point, or quantity of vapour in the atmosphere; made on the mountains in the North of England.

On the saline impregnation of the rain which fell during the late storm, December 5th, 1822—with an appendix to the same.

On the nature and properties of indigo, with directions for the valuation of different samples.

In the Philosophical Transactions of the Royal Society.

On the Constitution of the Atmosphere.—1826.

In Mr. Nicholson’s Philosophical Journal.

VOL. 5. (Quarto) On the constitution of mixed elastic fluids, and the atmosphere.—1801.

VOL. 3. (Octavo) On the theory of mixed gases.

5. On the zero of temperature.

6. Correction of a mistake in Dr. Kirwan’s essay on the state of vapour in the atmosphere.

8. On chemical affinity as applied to atmospheric air.

9. Observations on Mr. Gough’s strictures on the theory of mixed gases.

10. Facts tending to decide at what point of temperature water possesses the greatest density.

12. Remarks on Count Rumford’s experiments on the max. density of water.

13 & 14. On the max. density of water in reference to Dr. Hope’s experiments.

28. On the signification of the word particle as used by chemists.

29. Observations on Dr. Bostock’s review of the atomic principles of chemistry.

In Dr. Thomson’s Annals of Philosophy.

VOL 1 & 2. On oxymuriate of lime.—1813.

3. Remarks on the essay of Dr. Berzelius, on the cause of chemical proportions.

7. Vindication of the theory of the absorption of gases by water, against the conclusions of M. De Saussure.

9 & 10. On the chemical compounds of azote and oxygen, and on ammonia.

11. On phosphuretted hydrogen.

12. On the combustion of alcohol, by the lamp without flame.

On the vis viva.

In Phillips’s Annals of Philosophy.

VOL. 10. (new series). On the analysis of atmospheric air by hydrogen.

Footnotes:

[1] Manchester Memoirs, Vol. II. (second series.)

[2] 7.9 when duly corrected. Annal. de Chimie, 78—114.

[3] Memoirs d’Arcueil 2—168.

[4] Kirwan’s Mineralogy.

[5] Annals of Philosophy, Vol. 3, p. 333.

[6] Philos. Trans. 1802.

[7] Jour. de Physique. 1805.

[8] Mem. d’Arcueil, Vol. 2. p. 168. 1809.

[9] Annals of Philosophy, Vol. 2. p. 48.

[10] By nitric acid, the result of 3 experiments all agreeing for the deutoxide; the protoxide is by calculation and less certain. He afterwards adopts 13.6 from Berzelius. Journ. de Phys. Aug. 1814.

[11] The protoxide from hydrogen by solution; the deutoxide by transmitting steam over the metal at a red heat.

[12] The 2d. by oxydizing the sulphuret of tin by nitric acid; the 1st. by inference only, one half of the oxygen of the 2d.

[13] An. of Philos. 6—198

[14] An. of Philos. 3-244

[15] An. of Philos. 8—237

[16] An. de Chimie, 54—28

[17] An. of Philos.—4—356

[18] Manchester Memoirs, Vol. v. page 120.

[19] Philos. Mag. Vol. xiii.

[20] See a very excellent essay on the alloy of copper and tin by M. Dussaussoy, in the Annales de Chimie & Physique. 5—113.

[21] This author obtained the Royal Society’s gold medal for his essay on the composition, &c. of specula for telescopes. Philos. Transact. 1787.

[22] An. of Philos. Vol. 12.

[23] An. de Chim. & Physique. 5—233.

[24] The result for this last article must be considered more uncertain than any of the previous ones, the experiment being more complicated.

[25] That is, the temperature that would be denoted by mercury inclosed in a vessel having no expansion by heat; or else in one that expanded in the same rate as mercury.

[26] By recent experiments I find the heat evolved in the union of oxygen and hydrogen, would raise the temperature of the same weight of water 6500°.

[27] See Dr. Henry’s note, Manch. Memoirs, vol. 5, page 679.

[28] The aqueous vapour in this case maybe considered as insignificant.

[29] A gas found in oil and coal gas. See Manchester Memoirs, vol. 4 (new series), page 73.

Transcriber’s Notes:

Antiquated spellings or ancient words were not corrected.

The footnotes have been moved so that they do not break up paragraphs and so that they are next to the text they illustrate.

Typographical and punctuation errors have been silently corrected.

*** END OF THE PROJECT GUTENBERG EBOOK A NEW SYSTEM OF CHEMICAL PHILOSOPHY, VOLUME 2, PART 1 ***

Updated editions will replace the previous one—the old editions will be renamed.

Creating the works from print editions not protected by U.S. copyright law means that no one owns a United States copyright in these works, so the Foundation (and you!) can copy and distribute it in the United States without permission and without paying copyright royalties. Special rules, set forth in the General Terms of Use part of this license, apply to copying and distributing Project Gutenberg™ electronic works to protect the PROJECT GUTENBERG™ concept and trademark. Project Gutenberg is a registered trademark, and may not be used if you charge for an eBook, except by following the terms of the trademark license, including paying royalties for use of the Project Gutenberg trademark. If you do not charge anything for copies of this eBook, complying with the trademark license is very easy. You may use this eBook for nearly any purpose such as creation of derivative works, reports, performances and research. Project Gutenberg eBooks may be modified and printed and given away—you may do practically ANYTHING in the United States with eBooks not protected by U.S. copyright law. Redistribution is subject to the trademark license, especially commercial redistribution.

START: FULL LICENSE

THE FULL PROJECT GUTENBERG LICENSE

PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK

To protect the Project Gutenberg™ mission of promoting the free distribution of electronic works, by using or distributing this work (or any other work associated in any way with the phrase “Project Gutenberg”), you agree to comply with all the terms of the Full Project Gutenberg™ License available with this file or online at www.gutenberg.org/license.

Section 1. General Terms of Use and Redistributing Project Gutenberg™ electronic works

1.A. By reading or using any part of this Project Gutenberg™ electronic work, you indicate that you have read, understand, agree to and accept all the terms of this license and intellectual property (trademark/copyright) agreement. If you do not agree to abide by all the terms of this agreement, you must cease using and return or destroy all copies of Project Gutenberg™ electronic works in your possession. If you paid a fee for obtaining a copy of or access to a Project Gutenberg™ electronic work and you do not agree to be bound by the terms of this agreement, you may obtain a refund from the person or entity to whom you paid the fee as set forth in paragraph 1.E.8.

1.B. “Project Gutenberg” is a registered trademark. It may only be used on or associated in any way with an electronic work by people who agree to be bound by the terms of this agreement. There are a few things that you can do with most Project Gutenberg™ electronic works even without complying with the full terms of this agreement. See paragraph 1.C below. There are a lot of things you can do with Project Gutenberg™ electronic works if you follow the terms of this agreement and help preserve free future access to Project Gutenberg™ electronic works. See paragraph 1.E below.

1.C. The Project Gutenberg Literary Archive Foundation (“the Foundation” or PGLAF), owns a compilation copyright in the collection of Project Gutenberg™ electronic works. Nearly all the individual works in the collection are in the public domain in the United States. If an individual work is unprotected by copyright law in the United States and you are located in the United States, we do not claim a right to prevent you from copying, distributing, performing, displaying or creating derivative works based on the work as long as all references to Project Gutenberg are removed. Of course, we hope that you will support the Project Gutenberg™ mission of promoting free access to electronic works by freely sharing Project Gutenberg™ works in compliance with the terms of this agreement for keeping the Project Gutenberg™ name associated with the work. You can easily comply with the terms of this agreement by keeping this work in the same format with its attached full Project Gutenberg™ License when you share it without charge with others.

1.D. The copyright laws of the place where you are located also govern what you can do with this work. Copyright laws in most countries are in a constant state of change. If you are outside the United States, check the laws of your country in addition to the terms of this agreement before downloading, copying, displaying, performing, distributing or creating derivative works based on this work or any other Project Gutenberg™ work. The Foundation makes no representations concerning the copyright status of any work in any country other than the United States.

1.E. Unless you have removed all references to Project Gutenberg:

1.E.1. The following sentence, with active links to, or other immediate access to, the full Project Gutenberg™ License must appear prominently whenever any copy of a Project Gutenberg™ work (any work on which the phrase “Project Gutenberg” appears, or with which the phrase “Project Gutenberg” is associated) is accessed, displayed, performed, viewed, copied or distributed:

This eBook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook.

1.E.2. If an individual Project Gutenberg™ electronic work is derived from texts not protected by U.S. copyright law (does not contain a notice indicating that it is posted with permission of the copyright holder), the work can be copied and distributed to anyone in the United States without paying any fees or charges. If you are redistributing or providing access to a work with the phrase “Project Gutenberg” associated with or appearing on the work, you must comply either with the requirements of paragraphs 1.E.1 through 1.E.7 or obtain permission for the use of the work and the Project Gutenberg™ trademark as set forth in paragraphs 1.E.8 or 1.E.9.

1.E.3. If an individual Project Gutenberg™ electronic work is posted with the permission of the copyright holder, your use and distribution must comply with both paragraphs 1.E.1 through 1.E.7 and any additional terms imposed by the copyright holder. Additional terms will be linked to the Project Gutenberg™ License for all works posted with the permission of the copyright holder found at the beginning of this work.

1.E.4. Do not unlink or detach or remove the full Project Gutenberg™ License terms from this work, or any files containing a part of this work or any other work associated with Project Gutenberg™.

1.E.5. Do not copy, display, perform, distribute or redistribute this electronic work, or any part of this electronic work, without prominently displaying the sentence set forth in paragraph 1.E.1 with active links or immediate access to the full terms of the Project Gutenberg™ License.

1.E.6. You may convert to and distribute this work in any binary, compressed, marked up, nonproprietary or proprietary form, including any word processing or hypertext form. However, if you provide access to or distribute copies of a Project Gutenberg™ work in a format other than “Plain Vanilla ASCII” or other format used in the official version posted on the official Project Gutenberg™ website (www.gutenberg.org), you must, at no additional cost, fee or expense to the user, provide a copy, a means of exporting a copy, or a means of obtaining a copy upon request, of the work in its original “Plain Vanilla ASCII” or other form. Any alternate format must include the full Project Gutenberg™ License as specified in paragraph 1.E.1.

1.E.7. Do not charge a fee for access to, viewing, displaying, performing, copying or distributing any Project Gutenberg™ works unless you comply with paragraph 1.E.8 or 1.E.9.

1.E.8. You may charge a reasonable fee for copies of or providing access to or distributing Project Gutenberg™ electronic works provided that:

- • You pay a royalty fee of 20% of the gross profits you derive from the use of Project Gutenberg™ works calculated using the method you already use to calculate your applicable taxes. The fee is owed to the owner of the Project Gutenberg™ trademark, but he has agreed to donate royalties under this paragraph to the Project Gutenberg Literary Archive Foundation. Royalty payments must be paid within 60 days following each date on which you prepare (or are legally required to prepare) your periodic tax returns. Royalty payments should be clearly marked as such and sent to the Project Gutenberg Literary Archive Foundation at the address specified in Section 4, “Information about donations to the Project Gutenberg Literary Archive Foundation.”

- • You provide a full refund of any money paid by a user who notifies you in writing (or by e-mail) within 30 days of receipt that s/he does not agree to the terms of the full Project Gutenberg™ License. You must require such a user to return or destroy all copies of the works possessed in a physical medium and discontinue all use of and all access to other copies of Project Gutenberg™ works.

- • You provide, in accordance with paragraph 1.F.3, a full refund of any money paid for a work or a replacement copy, if a defect in the electronic work is discovered and reported to you within 90 days of receipt of the work.

- • You comply with all other terms of this agreement for free distribution of Project Gutenberg™ works.

1.E.9. If you wish to charge a fee or distribute a Project Gutenberg™ electronic work or group of works on different terms than are set forth in this agreement, you must obtain permission in writing from the Project Gutenberg Literary Archive Foundation, the manager of the Project Gutenberg™ trademark. Contact the Foundation as set forth in Section 3 below.

1.F.

1.F.1. Project Gutenberg volunteers and employees expend considerable effort to identify, do copyright research on, transcribe and proofread works not protected by U.S. copyright law in creating the Project Gutenberg™ collection. Despite these efforts, Project Gutenberg™ electronic works, and the medium on which they may be stored, may contain “Defects,” such as, but not limited to, incomplete, inaccurate or corrupt data, transcription errors, a copyright or other intellectual property infringement, a defective or damaged disk or other medium, a computer virus, or computer codes that damage or cannot be read by your equipment.

1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right of Replacement or Refund” described in paragraph 1.F.3, the Project Gutenberg Literary Archive Foundation, the owner of the Project Gutenberg™ trademark, and any other party distributing a Project Gutenberg™ electronic work under this agreement, disclaim all liability to you for damages, costs and expenses, including legal fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH DAMAGE.

1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a defect in this electronic work within 90 days of receiving it, you can receive a refund of the money (if any) you paid for it by sending a written explanation to the person you received the work from. If you received the work on a physical medium, you must return the medium with your written explanation. The person or entity that provided you with the defective work may elect to provide a replacement copy in lieu of a refund. If you received the work electronically, the person or entity providing it to you may choose to give you a second opportunity to receive the work electronically in lieu of a refund. If the second copy is also defective, you may demand a refund in writing without further opportunities to fix the problem.

1.F.4. Except for the limited right of replacement or refund set forth in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.

1.F.5. Some states do not allow disclaimers of certain implied warranties or the exclusion or limitation of certain types of damages. If any disclaimer or limitation set forth in this agreement violates the law of the state applicable to this agreement, the agreement shall be interpreted to make the maximum disclaimer or limitation permitted by the applicable state law. The invalidity or unenforceability of any provision of this agreement shall not void the remaining provisions.

1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the trademark owner, any agent or employee of the Foundation, anyone providing copies of Project Gutenberg™ electronic works in accordance with this agreement, and any volunteers associated with the production, promotion and distribution of Project Gutenberg™ electronic works, harmless from all liability, costs and expenses, including legal fees, that arise directly or indirectly from any of the following which you do or cause to occur: (a) distribution of this or any Project Gutenberg™ work, (b) alteration, modification, or additions or deletions to any Project Gutenberg™ work, and (c) any Defect you cause.

Section 2. Information about the Mission of Project Gutenberg™

Project Gutenberg™ is synonymous with the free distribution of electronic works in formats readable by the widest variety of computers including obsolete, old, middle-aged and new computers. It exists because of the efforts of hundreds of volunteers and donations from people in all walks of life.

Volunteers and financial support to provide volunteers with the assistance they need are critical to reaching Project Gutenberg™’s goals and ensuring that the Project Gutenberg™ collection will remain freely available for generations to come. In 2001, the Project Gutenberg Literary Archive Foundation was created to provide a secure and permanent future for Project Gutenberg™ and future generations. To learn more about the Project Gutenberg Literary Archive Foundation and how your efforts and donations can help, see Sections 3 and 4 and the Foundation information page at www.gutenberg.org.

Section 3. Information about the Project Gutenberg Literary Archive Foundation

The Project Gutenberg Literary Archive Foundation is a non-profit 501(c)(3) educational corporation organized under the laws of the state of Mississippi and granted tax exempt status by the Internal Revenue Service. The Foundation’s EIN or federal tax identification number is 64-6221541. Contributions to the Project Gutenberg Literary Archive Foundation are tax deductible to the full extent permitted by U.S. federal laws and your state’s laws.

The Foundation’s business office is located at 809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887. Email contact links and up to date contact information can be found at the Foundation’s website and official page at www.gutenberg.org/contact

Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation

Project Gutenberg™ depends upon and cannot survive without widespread public support and donations to carry out its mission of increasing the number of public domain and licensed works that can be freely distributed in machine-readable form accessible by the widest array of equipment including outdated equipment. Many small donations ($1 to $5,000) are particularly important to maintaining tax exempt status with the IRS.

The Foundation is committed to complying with the laws regulating charities and charitable donations in all 50 states of the United States. Compliance requirements are not uniform and it takes a considerable effort, much paperwork and many fees to meet and keep up with these requirements. We do not solicit donations in locations where we have not received written confirmation of compliance. To SEND DONATIONS or determine the status of compliance for any particular state visit www.gutenberg.org/donate.

While we cannot and do not solicit contributions from states where we have not met the solicitation requirements, we know of no prohibition against accepting unsolicited donations from donors in such states who approach us with offers to donate.

International donations are gratefully accepted, but we cannot make any statements concerning tax treatment of donations received from outside the United States. U.S. laws alone swamp our small staff.

Please check the Project Gutenberg web pages for current donation methods and addresses. Donations are accepted in a number of other ways including checks, online payments and credit card donations. To donate, please visit: www.gutenberg.org/donate.

Section 5. General Information About Project Gutenberg™ electronic works

Professor Michael S. Hart was the originator of the Project Gutenberg™ concept of a library of electronic works that could be freely shared with anyone. For forty years, he produced and distributed Project Gutenberg™ eBooks with only a loose network of volunteer support.

Project Gutenberg™ eBooks are often created from several printed editions, all of which are confirmed as not protected by copyright in the U.S. unless a copyright notice is included. Thus, we do not necessarily keep eBooks in compliance with any particular paper edition.

Most people start at our website which has the main PG search facility: www.gutenberg.org.

This website includes information about Project Gutenberg™, including how to make donations to the Project Gutenberg Literary Archive Foundation, how to help produce our new eBooks, and how to subscribe to our email newsletter to hear about new eBooks.

Table of Contents

A NEW SYSTEM OF CHEMICAL PHILOSOPHY. PART FIRST.—VOL. II.

SECTION 13. METALLIC OXIDES.

1. Oxide of Gold.

2. Oxide of Platina.

3. Oxide of Silver.

4. Oxides of Mercury.

5. Oxide of Palladium.

6, 7, and 8. Oxides of Rhodium, Iridium, and Osmium.

9. Oxides of Copper.

10. Oxides of Iron.

11. Oxides of Nickel.

12. Oxides of Tin.

13. Oxides of Lead.

14. Oxide of zinc.

15. Oxides of potassium.

16. Oxides of sodium.

17. Oxide of bismuth.

18. Oxides of antimony.

19. Oxide of tellurium.

20. Oxides of arsenic.

21. Oxides of cobalt.

22. Oxides of manganese.

23. Oxides of chromium.

24. Oxides of uranium.

25. Oxides of molybdenum.

26. Oxides of tungsten.

27. Oxides of titanium.

28. Oxides of columbium.

29. Oxides of cerium.

SECTION 14. EARTHY, ALKALINE AND METALLIC SULPHURETS.

1. Sulphurets of lime.

2. Sulphuret of magnesia.

3. Sulphuret of barytes.

4. Sulphurets of strontites.

5, 6, 7, 8, and 9. Sulphurets of alumine, silex, yttria, glucine, and zircone.

10. Sulphurets of potash.

11. Sulphurets of soda.

12. Sulphuret of ammonia.

13. Sulphurets of gold.

14. Sulphuret of platina.

15. Sulphurets of silver.

16. Sulphurets of mercury.

17. Sulphuret of palladium.

18. Sulphuret of rhodium.

19. Sulphuret of iridium.

20. Sulphuret of osmium.

21. Sulphurets of copper.

22. Sulphurets of iron.

23. Sulphurets of nickel.

24. Sulphurets of tin.

25. Sulphurets of lead.

26. Sulphurets of zinc.

27 and 28. Sulphurets of potassium and sodium.

29. Sulphurets of bismuth.

30. Sulphurets of antimony.

31. Sulphuret of tellurium.

32. Sulphurets of arsenic.

33. Sulphuret of cobalt.

34. Sulphurets of manganese.

35. Sulphuret of chromium.

36. Sulphuret of uranium.

37. Sulphuret of molybdenum.

38. Sulphuret of tungsten.

39. Sulphuret of titanium.

40. Sulphuret of columbium.

41. Sulphuret of cerium.

SECTION 15. EARTHY, ALKALINE, METALLIC AND OTHER PHOSPHURETS.

1. Phosphuret of hydrogen.

2 and 3. Phosphurets of carbone and sulphur.

4. Phosphuret of lime.

5. Phosphuret of barytes.

6. Phosphuret of strontites.

7. Phosphuret of gold.

8. Phosphuret of platina.

9. Phosphuret of silver.

10. Phosphuret of mercury.

11. Phosphuret of palladium.

12. Phosphuret of copper.

13. Phosphuret of iron.

14. Phosphuret of nickel.

15. Phosphuret of tin.

16. Phosphuret of lead.

17. Phosphuret of zinc.

18. Phosphuret of potassium.

19. Phosphuret of sodium.

20. Phosphuret of bismuth.

21. Phosphuret of antimony.

22. Phosphuret of arsenic.

23. Phosphuret of cobalt.

24. Phosphuret of manganese.

SECTION 16. CARBURETS.

1. Carburets of iron.

SECTION 17. METALLIC ALLOYS.

Alloys of Gold with other Metals.

Alloys of Platina with other Metals.

Alloys of Silver with other Metals.

Alloys of Mercury and other Metals: Amalgams.

Triple, quadruple, &c. Amalgams.

Alloys of Copper with other Metals.

Alloys of Iron with other Metals.

Alloys of Nickel and other Metals.

Alloys of Tin with other Metals.

Alloys of Lead with other Metals.

Triple Alloys, Solders; Fusible Metal, &c.

APPENDIX.

The Laws of Refrigeration.

Remarks on the above Essays.

Iron, Copper, and Platina.

FORMULÆ FOR DETERMINING THE PROPORTIONS OF COMBUSTIBLE GASES IN MIXTURES.

1. Carbonic oxide and hydrogen.

2. Sulphuretted hydrogen and hydrogen.

3. Phosphuretted hydrogen and hydrogen; also carburetted hydrogen and hydrogen, and carburetted hydrogen and carbonic oxide.

4. Olefiant gas and carburetted hydrogen.

5. Carburetted hydrogen, carbonic oxide and hydrogen.

6. Olefiant gas, carburetted hydrogen and carbonic oxide.

8. Superolefiant gas, carburetted hydrogen, carbonic oxide, and hydrogen.

HEAT PRODUCED BY THE COMBUSTION OF GASES.

ABSORPTION OF GASES BY WATER, &c.

FLUORIC ACID.—DEUTOXIDE OF HYDROGEN.

MURIATIC ACID.—OXYMURIATIC ACID, &c.

NITRIC ACID—COMPOUNDS OF AZOTE AND OXYGEN.

ON AMMONIA.

SULPHURET OF CARBON.

POTASSIUM, SODIUM, &c.

ALUM.

ON THE PRINCIPLES OF THE ATOMIC SYSTEM OF CHEMISTRY.

NEW TABLE OF THE RELATIVE WEIGHTS OF ATOMS.

ADDENDA.

EXPANSION OF LIQUIDS BY HEAT.

THE FULL PROJECT GUTENBERG LICENSE